Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effect of Tensile Reinforcement Ratio on the Effective Moment of Inertia of Reinforced Lightweight Concrete Beams for Short Term Deflection Calculation

Journal of Engineering and Technological Sciences · Vol. 43 No. 3 (2013) · hlm. 209–226

DOI
10.5614/itbj.eng.sci.2011.43.3.4
ISSN
2338-5502, 2337-5779
Terbit
2013-09-13
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

This paper presents an improvement model of the effective moment of inertia to predict the short term deflection of reinforced lightweight concrete beam. The models were developed using 9 beams of reinforced pumicelightweight concrete tested under two symmetrical-point loads. The presence of steel reinforcement in the beam was taken into consideration in the developed model. The models were verified by test carried out on other 9 beams. Those beams subjected to various-point loads and compressive strength. The results of investigation revealed that crack moment of inertia increased with the increased tensile reinforcement ratio. Thus, the reinforcement ratio significantly affects the value of effective moment of inertia of reinforced lightweight concrete beam. All the beam test results produced considerable deflection in comparison to that obtained using current Codes either ACI or SNI. The proposed model demonstrated a good agreement to the experimental results and in some cases have similar trend to that of the ACI or SNI prediction.

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Riau University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nurmasitoh NurmasitohRiau University1
Muhdarina MuhdarinaRiau University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of Tensile Reinforcement Ratio on the Effective Moment of Inertia of Reinforced Lightweight Concrete Beams for Short Term Deflection Calculation</dc:title>
	<dc:creator>Akmaluddin, Akmaluddin</dc:creator>
	<dc:description xml:lang="en-US">This paper presents an improvement model of the effective moment of inertia  to  predict  the  short  term  deflection  of  reinforced  lightweight  concrete beam.  The  models  were  developed  using  9  beams  of  reinforced  pumicelightweight concrete tested under two symmetrical-point loads. The presence of steel  reinforcement  in  the  beam  was  taken  into  consideration  in  the  developed model.  The  models  were  verified  by  test  carried  out  on  other  9  beams.  Those beams subjected to various-point loads and compressive strength. The results of investigation revealed that crack moment of inertia increased with the increased tensile reinforcement ratio. Thus, the reinforcement ratio significantly affects the value of effective moment of inertia of reinforced lightweight concrete beam. All the  beam  test  results  produced  considerable  deflection  in  comparison  to  that obtained  using  current  Codes  either  ACI  or  SNI.  The  proposed  model demonstrated  a  good  agreement  to  the  experimental  results  and  in  some  cases have similar trend to that of the ACI or SNI prediction.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-09-13</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/154</dc:identifier>
	<dc:identifier>10.5614/itbj.eng.sci.2011.43.3.4</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 43 No. 3 (2011); 209-226</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/154/148</dc:relation>
</oai_dc:dc>