Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Miscibility Development Computation in Enhanced Oil Recovery by Flare Gas Flooding

Journal of Engineering and Technological Sciences · Vol. 44 No. 3 (2013) · hlm. 270–286

DOI
10.5614/itbj.eng.sci.2012.44.3.5
ISSN
2338-5502, 2337-5779
Terbit
2013-09-13
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

The use of flare gas as injection gas in miscible gas flooding enhanced oil recovery (MGF-EOR) presents a potential synergy between oil production improvement and greenhouse gases emission mitigation. This work is a preliminary evaluation of the feasibility of miscible flare gas injection based on phase behavior computations of a model oil (43% n-C5H12: 57% n-C16H34) and a model flare gas (91% CH4: 9% C2H6). The computations employed the multiple mixing-cell model with Peng-Robinson and PC-SAFT equations of state, and compared the minimum miscibility pressure (MMP) value in the cases of flare gas injection and CO2 injection. For CO2 injection, both equations of state produced MMP values close to the measured value of 10.55 MPa. Flare gas injection MMP values were predicted to be 3.6-4.5 times those of CO2 injection. This very high MMP implies high gas compression costs, and may compromise the integrity of the reservoir. Subsequent studies shall explore the gas -oil miscibility behavior of mixtures of flare gas with intermediate hydrocarbon gases and CO2, in order to identify a suitable approach for rendering flare gas feasible as an injection gas in MGF-EOR.

Jaringan kolaborasi para penulis

28 penulis · 62 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • National Institute of Advanced Industrial Science and Technology
  • Diponegoro University
  • Universitas Bhayangkara Jakarta Raya
  • Universitas Pembangunan Nasional Veteran Yogyakarta
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yazid BindarBandung Institute of Technology2
Subagjo SubagjoBandung Institute of Technology2
Taufan MarhaendrajanaBandung Institute of Technology2
Toshihiro HirotsuNational Institute of Advanced Industrial Science and Technology1
Shinichi GotoNational Institute of Advanced Industrial Science and Technology1
Aprilina PurbasariDiponegoro University1
I Dewa Gede Arsa PutrawanBandung Institute of Technology1
Bambang Eko PrabowoBandung Institute of Technology1
Alinda DwitawidiBandung Institute of Technology1
Kevin R. LismanaBandung Institute of Technology1
Khasin FuadiBandung Institute of Technology1
Melia Laniwati GunawanBandung Institute of Technology1
Endang Sri RahayuBandung Institute of Technology1
Dian ShofinitaBandung Institute of Technology1
Najwa Shufia CholiqBandung Institute of Technology1
Arwinda Aprillia JaelawijayaBandung Institute of Technology1
Deana WahyuningrumBandung Institute of Technology1
Rani KurniaBandung Institute of Technology1
Dian Asfriany NurfalahBandung Institute of Technology1
Tutuka AriadjiBandung Institute of Technology1
Prasandi Abdul AzizBandung Institute of Technology1
Bagus Endar B. NurhandokoBandung Institute of Technology1
Asep Kurnia PermadiBandung Institute of Technology1
Berkah HaniUniversitas Bhayangkara Jakarta Raya1
Harry BudiharjoUniversitas Pembangunan Nasional Veteran Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Miscibility Development Computation in Enhanced Oil Recovery by Flare Gas Flooding</dc:title>
	<dc:creator>Samadhi, Tjokorde Walmiki</dc:creator>
	<dc:creator>Siagian, Utjok W.R.</dc:creator>
	<dc:creator>Budiono, Angga P.</dc:creator>
	<dc:description xml:lang="en-US">The use of flare gas as injection gas in miscible gas flooding enhanced oil  recovery  (MGF-EOR)  presents  a  potential  synergy  between  oil  production improvement  and  greenhouse  gases  emission  mitigation.  This  work  is  a preliminary evaluation of the feasibility of miscible flare gas injection based on phase behavior computations of  a model oil (43% n-C5H12 : 57% n-C16H34) and a model flare gas (91% CH4  : 9% C2H6). The computations employed the multiple mixing-cell  model  with  Peng-Robinson  and  PC-SAFT  equations  of  state,  and compared the minimum miscibility pressure (MMP) value in the cases of flare gas  injection  and  CO2  injection.  For  CO2  injection,  both  equations  of  state produced  MMP  values  close  to  the  measured  value  of  10.55  MPa.  Flare  gas injection MMP values were predicted to be 3.6-4.5 times those of CO2  injection. This very high MMP implies high gas compression costs, and may compromise the  integrity  of  the  reservoir.  Subsequent  studies  shall  explore  the  gas -oil miscibility  behavior  of  mixtures  of  flare  gas  with  intermediate  hydrocarbon gases and  CO2,  in  order to  identify  a suitable approach for rendering flare  gas feasible as an injection gas in MGF-EOR.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-09-13</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/198</dc:identifier>
	<dc:identifier>10.5614/itbj.eng.sci.2012.44.3.5</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 44 No. 3 (2012); 270-286</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/198/192</dc:relation>
</oai_dc:dc>