Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Gas Deliverability Model with Different Vertical Wells Properties

Journal of Engineering and Technological Sciences · Vol. 35 No. 2 (2013) · hlm. 125–138

DOI
10.5614/itbj.eng.sci.2003.35.2.3
ISSN
2338-5502, 2337-5779
Terbit
2013-12-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

We present here a gas deliverability computational model for single reservoir with multi wells. The questions of how long the gas delivery can be sustained and how to estimate the plateau time are discussed here. In order to answer such a question, in this case, a coupling method which consists of material balance method and gas flow equation method is developed by assuming no water influx in the reservoir. Given the rate and the minimum pressure of gas at the processing plant, the gas pressure at the wellhead and at the bottom hole can be obtained. From here, the estimation of the gas deliverability can be done. In this paper we obtain a computational method which gives direct computation for pressure drop from the processing plant to the wells, taking into account different well behavior. Here AOF technique is used for obtaining gas rate in each well. Further Tian & Adewumi correlation is applied for pressure drop model along vertical and horizontal pipes and Runge-Kutta method is chosen to compute the well head and bottom hole pressures in each well which then being used to estimate the plateau times. We obtain here direct computational scheme of gas deliverability from reservoir to processing plant for single reservoir with multi-wells properties. Computational results give different profiles (i.e. gas rate, plateau and production time, etc) for each well. Further by selecting proper flow rate reduction, the flow distribution after plateau time to sustain the delivery is computed for each well.

Jaringan kolaborasi para penulis

25 penulis · 75 tautan kepenulisan bersama · 16 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Universitas Pembangunan Nasional Veteran Yogyakarta
  • Universitas Halu Oleo
  • Satya Wacana Christian University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Irwan IrwanUniversitas Halu Oleo1
A. D. HidayaturobbiAfiliasi tidak diketahui1
S N ListianiBandung Institute of Technology1
Beatrice Andreanna WijayaBandung Institute of Technology1
T. AdiningrumBandung Institute of Technology1
Agus PratomoBandung Institute of Technology1
Taufan MarhaendrajanaBandung Institute of Technology1
Boni SwadesiUniversitas Pembangunan Nasional Veteran Yogyakarta1
Hasian P. Septoratno SiregarBandung Institute of Technology1
Kuntjoro Adji SidartoBandung Institute of Technology1
Darmadi DarmadiBandung Institute of Technology1
Adhe KaniaBandung Institute of Technology1
R. Arman WidhymarmantoAfiliasi tidak diketahui1
Suryasatriya TrihandaruSatya Wacana Christian University1
Ivanky SaputraAfiliasi tidak diketahui1
Septoratno SiregarBandung Institute of Technology1
Harry Budiharjo SulistyarsoUniversitas Pembangunan Nasional Veteran Yogyakarta1
Sinatra CanggihBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Gas Deliverability Model with Different Vertical Wells Properties</dc:title>
	<dc:creator>Mucharam, L.</dc:creator>
	<dc:creator>Sukarno, P.</dc:creator>
	<dc:creator>Siregar, S.</dc:creator>
	<dc:creator>Syihab, Z.</dc:creator>
	<dc:creator>Soewono, E.</dc:creator>
	<dc:creator>Apri, M.</dc:creator>
	<dc:creator>Irzal, F.</dc:creator>
	<dc:description xml:lang="en-US">We present here a gas deliverability computational model for single reservoir with multi wells. The questions of how long the gas delivery can be sustained and how to estimate the plateau time are discussed here. In order to answer such a question, in this case, a coupling method which consists of material balance method and gas flow equation method is developed by assuming no water influx in the reservoir. Given the rate and the minimum pressure of gas at the processing plant, the gas pressure at the wellhead and at the bottom hole can be obtained. From here, the estimation of the gas deliverability can be done. In this paper we obtain a computational method which gives direct computation for pressure drop from the processing plant to the wells, taking into account different well behavior. Here AOF technique is used for obtaining gas rate in each well. Further Tian &amp;amp; Adewumi correlation is applied for pressure drop model along vertical and horizontal pipes and Runge-Kutta method is chosen to compute the well head and bottom hole pressures in each well which then being used to estimate the plateau times. We obtain here direct computational scheme of gas deliverability from reservoir to processing plant for single reservoir with multi-wells properties. Computational results give different profiles (i.e. gas rate, plateau and production time, etc) for each well. Further by selecting proper flow rate reduction, the flow distribution after plateau time to sustain the delivery is computed for each well.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/309</dc:identifier>
	<dc:identifier>10.5614/itbj.eng.sci.2003.35.2.3</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 35 No. 2 (2003); 125-138</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/309/292</dc:relation>
</oai_dc:dc>