Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Simple Fabrication of Carbon Nanotubes from Ethanol using an Ultrasonic Spray Pyrolysis

Journal of Engineering and Technological Sciences · Vol. 36 No. 2 (2013) · hlm. 125–131

DOI
10.5614/itbj.eng.sci.2004.36.2.3
ISSN
2338-5502, 2337-5779
Terbit
2013-12-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Carbon nanotubes of diameter (20"“100 nm) are synthesized by pyrolyzing a sprayed solution of Fe(C5H5)2 and C2H5OH in an Ar atmosphere at relatively low temperatures (around 800 oC). The tubular structures consist of highly crystalline nested graphene cylinders (<200 concentric tubes). Tube diameter can be controlled by varying the furnace temperature, carrier gas flow rate and the Fe:C ratio within the precursor solution. This low cost route for the synthesis of carbon nanotubes is advantageous due the low pyrolytic temperature, safety, processable in atmospheric pressure, and scalable.

Jaringan kolaborasi para penulis

18 penulis · 44 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Hiroshima University
  • Tanjungpura University
  • Korea Institute of Industrial Technology
  • Universitas Jember
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Khairurrijal KhairurrijalBandung Institute of Technology3
Nadya AmaliaBandung Institute of Technology2
Mamat RokhmatBandung Institute of Technology2
Sparisoma ViridiBandung Institute of Technology2
Nina Yunia HasanahAfiliasi tidak diketahui1
Bebeh Wahid NuryadinAfiliasi tidak diketahui1
Aris PriatamaBandung Institute of Technology1
Hernawan MahfudzBandung Institute of Technology1
S. SutisnaBandung Institute of Technology1
Asifa AsriTanjungpura University1
Ferry IskandarBandung Institute of Technology1
Ricky Dwi SeptiantoBandung Institute of Technology1
Myong‐Hwa LeeKorea Institute of Industrial Technology1
Edi WibowoAfiliasi tidak diketahui1
Sutisna SutisnaUniversitas Jember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Simple Fabrication of Carbon Nanotubes from Ethanol using an Ultrasonic Spray Pyrolysis</dc:title>
	<dc:creator>Abdullah, Mikrajuddin</dc:creator>
	<dc:creator>Iskandar, Ferry</dc:creator>
	<dc:creator>Okuyama, Kikuo</dc:creator>
	<dc:description xml:lang="en-US">Carbon nanotubes of diameter (20"“100 nm) are synthesized by pyrolyzing a sprayed solution of Fe(C5H5)2 and C2H5OH in an Ar atmosphere at relatively low temperatures (around 800 oC). The tubular structures consist of highly crystalline nested graphene cylinders (&amp;lt;200 concentric tubes). Tube diameter can be controlled by varying the furnace temperature, carrier gas flow rate and the Fe:C ratio within the precursor solution. This low cost route for the synthesis of carbon nanotubes is advantageous due the low pyrolytic temperature, safety, processable in atmospheric pressure, and scalable.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/319</dc:identifier>
	<dc:identifier>10.5614/itbj.eng.sci.2004.36.2.3</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 36 No. 2 (2004); 125-131</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/319/302</dc:relation>
</oai_dc:dc>