Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng
Abstrak
This paper presents the development of core spreading vortex element method, which is a mesh-free method, for simulating 3D viscous flow over bluff bodies. The developed method simulates external flow around complex geometry by tracking local velocities and vorticities of particles introduced within the fluid domain. The viscous effect is modeled using core spreading method coupled with the splitting spatial adaption scheme, and a smoothing interpolation scheme for overlapping issue and population control, respectively. The particle's velocity is calculated using Biot-Savart formulation. To accelerate computation, Fast Multipole Method (FMM) is employed. The solver is validated, for both unbounded and bounded flows at low Reynolds numbers, using a number of benchmark problems. For unbounded case, simulation of the collision of two vortex rings was performed. To test the performance of the method in simulating bounded flow problem, simulation of flow around a sphere was carried out. The results are found to be in good agreement with those reported in literatures and also simulations using other diffusion model.
Jaringan kolaborasi para penulis
10 penulis ·
16 tautan kepenulisan bersama
· 7 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Bandung Institute of Technology
Keio University
Maranatha Christian University
State University of Semarang
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.