Melola Discovery

← Melola Discovery

Jurnal SINTA 1

3D Model Based on Terrestrial Laser Scanning (TLS) Case study: The Cangkuang Temple, Garut District, West Java, Indonesia

Journal of Engineering and Technological Sciences · Vol. 47 No. 1 (2015) · hlm. 1–19

DOI
10.5614/j.eng.technol.sci.2015.47.1.1
ISSN
2338-5502, 2337-5779
Terbit
2015-02-28
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

The subject of the investigation reported in this paper is the visualization of three-dimensional (3D) surface models in a 3D mapping survey using terrestrial laser scanning (TLS). The Cangkuang Temple nearby Garut City was chosen as the object. The laser technology instruments used were a Topcon GLS-1000 (Geodetic Laser Scanner) and a Topcon IS (Image Station). Twelve points at the same position in each 3D surface model were selected. The coordinate system of the IS was then transformed into the coordinate system of the GLS-1000 using a 3D similarity transformation model. The 3D distances were calculated for each model. Differences in distance were considered as errors in the x, y, and z direction. The standard deviation of the distance differences was ±0.301 m. Some of the distance differences did not fall within the range of tolerances (about 15%). The 3D surface model visualization of the Cangkuang Temple that was created from the GLS-1000 data was more precise than the one created from the IS data. In the future, such 3D surface model visualizations could be used for documentation, preservation and reconstruction of heritage buildings.

Jaringan kolaborasi para penulis

32 penulis · 108 tautan kepenulisan bersama · 28 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Udayana University
  • Institut Teknologi Sepuluh Nopember
  • Telkom University
  • University of Technology Malaysia
  • University of Otago
  • Universiti Sains Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Agung Budi HartoBandung Institute of Technology4
Ketut WikantikaBandung Institute of Technology3
I Wayan NuarsaUdayana University2
Shafarina Wahyu TrisyantiBandung Institute of Technology2
Andri HernandiBandung Institute of Technology2
Muhammad IhsanBandung Institute of Technology1
Muchamad MasykurAfiliasi tidak diketahui1
I Putu SatwikaInstitut Teknologi Sepuluh Nopember1
Loedi RatriantInstitut Teknologi Sepuluh Nopember1
Yoga SuwarnaAfiliasi tidak diketahui1
Elyta WidyaningrumAfiliasi tidak diketahui1
I NyomanUdayana University1
I Nyoman DibiaUdayana University1
Fenny Martha DwivanyBandung Institute of Technology1
Prila Ayu Dwi PrastiwiBandung Institute of Technology1
Farah Nafisa AriadjiBandung Institute of Technology1
Riantini VirtrianaBandung Institute of Technology1
Aminah KastuariBandung Institute of Technology1
Himasari HananBandung Institute of Technology1
Emir Maulidi HusniBandung Institute of Technology1
Sussi SussiTelkom University1
Arthur SiburianBandung Institute of Technology1
Rahadian YusufBandung Institute of Technology1
Asep Yusup SaptariBandung Institute of Technology1
Ratri WidyastutiBandung Institute of Technology1
Dhendy SaragihBandung Institute of Technology1
Halim SetanUniversity of Technology Malaysia1
Zainul Ahmad RajionUniversiti Sains Malaysia1
Albert K. ChongUniversity of Otago1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">3D Model Based on Terrestrial Laser Scanning (TLS) Case study: The Cangkuang Temple, Garut District, West Java, Indonesia</dc:title>
	<dc:creator>Hendriatiningsih, Sadikin</dc:creator>
	<dc:creator>Suwardhi, Deni</dc:creator>
	<dc:creator>Januragadi, J.</dc:creator>
	<dc:description xml:lang="en-US">The subject of the  investigation reported in this paper is  the visualization of three-dimensional (3D) surface models in a 3D mapping survey using terrestrial laser scanning (TLS). The Cangkuang Temple nearby Garut City was chosen as the object. The laser technology instruments used were a Topcon GLS-1000 (Geodetic Laser Scanner) and a Topcon IS (Image Station). Twelve points at  the same position in each 3D surface model  were selected.  The coordinate system of the IS was then transformed into the coordinate system of the GLS-1000 using a 3D similarity transformation model. The 3D distances were calculated for each model.  Differences  in distance were considered as errors  in the x, y,  and z  direction.  The standard deviation of the  distance differences was ±0.301 m. Some of the distance differences did not fall within the range of tolerances (about 15%). The 3D surface model visualization of the Cangkuang Temple that was created from the GLS-1000 data was more precise than the one created from the IS data. In the future, such 3D surface model visualizations could be used for documentation, preservation and reconstruction of heritage buildings.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2015-02-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/376</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2015.47.1.1</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 47 No. 1 (2015); 1-19</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/376/778</dc:relation>
</oai_dc:dc>