Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Integrated Analysis of Optimizing Tubing Material Selection for Gas Wells

Journal of Engineering and Technological Sciences · Vol. 47 No. 3 (2015) · hlm. 335–351

DOI
10.5614/j.eng.technol.sci.2015.47.3.8
ISSN
2338-5502, 2337-5779
Terbit
2015-08-28
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Corrosion in production tubing strings is seen as a challenging problem in gas wells containing carbon dioxideand hydrogen sulfide. This paper presents a new comprehensive method of corrosion rate calculation with integrated study of reservoir condition, nodal analysis of the well, and well trajectory, which could also have an effect due to the possibility of different flow regimes of the production fluid. This method is applicable to evaluate and predict the performance of selected tubing size and material. This method can also give an economic evaluation for the consideration of using corrosion resistant alloy (CRA) or low-alloy steel and carbon steel. The measurement of corrosion rate can be done by several methods,such as using corrosion coupons, calculating the iron content inside the production fluid, or probes. Either way, when the corrosion rate measured in the field is still below the acceptable maximum corrosion rate, it can be said that the adequacy of this method is guaranteed. This method has been implemented in a gas field,where it successfully selected the best tubing material for the next development well in this field. Consequently, the lifetime of the tubing strings could be extended,resulting in an economical benefit as well.

Jaringan kolaborasi para penulis

13 penulis · 42 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Padjadjaran University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ildrem SyafrieAfiliasi tidak diketahui1
Abdurrokhim -Afiliasi tidak diketahui1
Asep Mohamad Ishaq ShiddiqPadjadjaran University1
Brian ChristiantoroBandung Institute of Technology1
Petra WattimuryAfiliasi tidak diketahui1
Hastowo ResesiyantoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Integrated Analysis of Optimizing Tubing Material Selection for Gas Wells</dc:title>
	<dc:creator>Marbun, Bonar Tua Halomoan</dc:creator>
	<dc:creator>Sinaga, Samuel Zulkhifly</dc:creator>
	<dc:creator>Gaol, Calvin Lumban</dc:creator>
	<dc:creator>Arimbawa, Gde Valdy Irawan</dc:creator>
	<dc:creator>Pamungkas, Aristya Putra</dc:creator>
	<dc:creator>Hardama, Aldiano Falah</dc:creator>
	<dc:creator>Rizkiaputra, Ricko</dc:creator>
	<dc:description xml:lang="en-US">Corrosion in production tubing strings is seen as a challenging problem in gas wells containing carbon dioxideand hydrogen sulfide. This paper presents a new comprehensive method of corrosion rate calculation with integrated study of reservoir condition, nodal analysis of the well, and well trajectory, which could also have an effect due to the possibility of different flow regimes of the production fluid. This method  is applicable to evaluate and predict the performance of selected tubing size and material. This method can also give an economic evaluation for the consideration of using corrosion resistant alloy (CRA) or low-alloy steel and carbon steel. The measurement of corrosion rate can be done by several methods,such as using corrosion coupons, calculating the iron content inside  the production fluid, or probes. Either way, when  the corrosion rate measured in the field is still below the acceptable maximum corrosion rate, it can be said that the adequacy of this method is guaranteed. This method has been implemented in a gas field,where it successfully selected the best tubing material for the next development well in this field. Consequently, the lifetime of the tubing strings could be extended,resulting in an economical benefit as well.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2015-08-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/381</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2015.47.3.8</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 47 No. 3 (2015); 335-351</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/381/923</dc:relation>
</oai_dc:dc>