Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Behavior of Slab-Column Connections with Modified Shear Reinforcement under Cyclic Load

Journal of Engineering and Technological Sciences · Vol. 46 No. 1 (2013) · hlm. 17–36

DOI
10.5614/j.eng.technol.sci.2014.46.1.2
ISSN
2338-5502, 2337-5779
Terbit
2013-12-01
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Generally, slab-column frames show lower stiffness, drift capacity, and ductility as compared to beam-column frames. Under combined gravity and lateral cyclic loading, the lower initial stiffness and stiffness degradation lead to poor structural performance. Therefore, in the current codes, slab-column frames are recommended only for Intermediate Moment Frames with dual systems. The objective of this study is to modify slab-column connection details to enhance seismic performance such that the system can also be used with Special Moment Frames. Four specimens of interior slab-column connection models with the same dimensions and flexural reinforcement were tested under gravity and cyclic lateral loads. One specimen, constructed as control specimen, was designed using standard orthogonal stud rails. The other specimens used newly designed stud rails. The experimental results demonstrated that the modified stud rails significantly improved the specimens' behavior. The experimental results demonstrated that the modified stud rails significantly improve the specimen behavior. The highest ratio of initial stiffness adequacy of specimen with modified stud rail was 131.19% for risk category I/II, while the ratio of the control specimen was 97.94%. The highest relative energy dissipation ratio of specimen with modified stud rail was 33.82%, while the ratio of the control specimen was 25.94%.

Jaringan kolaborasi para penulis

29 penulis · 71 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Andalas University
  • Politeknik Negeri Bandung
  • Maranatha Christian University
  • Sultan Agung Islamic University
  • University of Nusa Cendana
  • Ministry of Public Works, Republic of Indonesia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Siti Aisyah NurjannahBandung Institute of Technology4
Ivindra PaneBandung Institute of Technology3
Herwani HerwaniBandung Institute of Technology3
Muslinang MoestopoBandung Institute of Technology2
Made SuarjanaBandung Institute of Technology2
Saptahari SugiriBandung Institute of Technology2
Herlien Dwiarti SetioBandung Institute of Technology2
Ediansjah ZulkifliBandung Institute of Technology2
Yurisman YurismanBandung Institute of Technology1
Anang KristiantoMaranatha Christian University1
Antonius AntoniusSultan Agung Islamic University1
Bambang SunendarBandung Institute of Technology1
Partogi Hasudungan SimatupangUniversity of Nusa Cendana1
Awal SuronoBandung Institute of Technology1
Ruddy KurniawanAndalas University1
Masyhur IrsyamBandung Institute of Technology1
Muhammad AsrurifakBandung Institute of Technology1
Delfebriyadi DelfebriyadiAndalas University1
Bigman Marihat HutapeaBandung Institute of Technology1
Indra Djati SidiBandung Institute of Technology1
Yudi HerdiansahBandung Institute of Technology1
Herlien Dwiarti SoemariBandung Institute of Technology1
Erwin LimBandung Institute of Technology1
Ahmed Najm AbdullahBandung Institute of Technology1
Veby Citra SimanjuntakMinistry of Public Works, Republic of Indonesia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Behavior of Slab-Column Connections with Modified Shear Reinforcement under Cyclic Load</dc:title>
	<dc:creator>Gunadi, Riawan</dc:creator>
	<dc:creator>Budiono, Bambang</dc:creator>
	<dc:creator>Imran, Iswandi</dc:creator>
	<dc:creator>Sofwan, Ananta</dc:creator>
	<dc:description xml:lang="en-US">Generally, slab-column frames show lower stiffness, drift capacity, and ductility as compared to beam-column frames. Under combined gravity and lateral cyclic loading, the lower initial stiffness and stiffness degradation lead to poor structural performance. Therefore, in the current codes, slab-column frames are recommended only for Intermediate Moment Frames with dual systems. The objective of this study is to modify slab-column connection details to enhance seismic performance such that the system can also be used with Special Moment Frames. Four specimens of interior slab-column connection models with the same dimensions and flexural reinforcement were tested under gravity and cyclic lateral loads. One specimen, constructed as control specimen, was designed using standard orthogonal stud rails. The other specimens used newly designed stud rails. The experimental results demonstrated that the modified stud rails significantly improved the specimens' behavior. The experimental results demonstrated that the modified stud rails significantly improve the specimen behavior. The highest ratio of initial stiffness adequacy of specimen with modified stud rail was 131.19% for risk category I/II, while the ratio of the control specimen was 97.94%. The highest relative energy dissipation ratio of specimen with modified stud rail was 33.82%, while the ratio of the control specimen was 25.94%.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/691</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2014.46.1.2</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 46 No. 1 (2014); 17-36</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/691/410</dc:relation>
</oai_dc:dc>