Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Optimum Fermentation Process for Red Macroalgae Gelidium latifolium and Gracillaria verrucosa

Journal of Engineering and Technological Sciences · Vol. 47 No. 6 (2016) · hlm. 674–687

DOI
10.5614/j.eng.technol.sci.2015.47.6.7
ISSN
2338-5502, 2337-5779
Terbit
2016-12-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Red macroalgae have the potential to be processed into bioethanol due to their high carbohydrate and low lignin content. Gelidium latifolium and Gracilaria verrucosa are red macroalgae commonly found in Indonesian seas. Sometimes an over-supply of red macroalgae is rejected by the food industry, which opens up opportunities for others uses, e.g. for producing bioethanol. The objectives of this research were to analyze the influence of sulfuric acid concentration on hydrolysis of G. latifolium and G. verrucosa and to calculate the optimum fermentation process to produce bioethanol. G. latifolium and G. verrucosa were hydrolyzed using H2SO4 at concentrations of 1%, 2%, 3%, and 4%, at a temperature of 121 °C and a pressure of 1.5 bar for 45 minutes. The process of fermentation was done using Saccharomyces cerevisiae in anaerobic conditions for 4, 5, 6 and 7 days. The results show that the optimum H2SO4 concentrations to hydrolyze G. latifolium and G. verrucosa were 1% and 2% respectively. The number of S. cerevisiae cells in hydrolysate G. latifolium and G. verrucosa increased in the third adaptation. S. cerevisiae can convert sugar from G. latifolium and G. verrucosa into bioethanol through fermentation. The highest bioethanol yields were achieved on days five and six. Therefore, red macroalgae can be seen as a potential raw material for bioethanol production.

Jaringan kolaborasi para penulis

31 penulis · 77 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • IPB University
  • Sriwijaya University
  • Sebelas Maret University
  • The University of Western Australia
  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dina AugustineIPB University6
Tri PrartonoIPB University5
Dedik BudiantaSriwijaya University2
Muhammad Agung SuarjiSriwijaya University2
Adipati NapoleonSriwijaya University2
Suntoro SuntoroSebelas Maret University2
Nanthi Sirangie BolanThe University of Western Australia2
Adriani SunuddinIPB University2
Dea Fauzia LestariIPB University2
Tri PratonoIPB University2
Ayi RachmatIPB University2
MAULINIA MAULINIAAfiliasi tidak diketahui1
Dedi SoedharmaIPB University1
AlimuddinAfiliasi tidak diketahui1
Andi ParenrengiNational Research and Innovation Agency1
Siti FadilahAfiliasi tidak diketahui1
Petrus Rani Pong-MasakAfiliasi tidak diketahui1
Deni SaputraIPB University1
Dwi SetyaningsihIPB University1
Bertoka Fajar Sp NegaraIPB University1
Chandrika Eka LarasatiIPB University1
Dietriech Geoffrey BengenIPB University1
Aditya Hikmat NugrahaIPB University1
Albida Rante TasakIPB University1
Hefni EffendiIPB University1
Zidni Ilma PalupiIPB University1
Neneng Sri HendraIPB University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Optimum Fermentation Process for Red Macroalgae Gelidium latifolium and Gracillaria verrucosa</dc:title>
	<dc:creator>Kawaroe, Mujizat</dc:creator>
	<dc:creator>Sari, Dahlia Wulan</dc:creator>
	<dc:creator>Hwangbo, Junkwon</dc:creator>
	<dc:creator>Santoso, Joko</dc:creator>
	<dc:description xml:lang="en-US">Red macroalgae have the potential to be processed into bioethanol due to their high carbohydrate and low lignin content. Gelidium latifolium and Gracilaria verrucosa are red macroalgae commonly found in Indonesian seas. Sometimes an over-supply of red macroalgae is rejected by the food industry, which opens up opportunities for others uses, e.g. for producing bioethanol. The objectives of this research were to analyze the influence of sulfuric acid concentration on hydrolysis of G. latifolium and G. verrucosa and to calculate the optimum fermentation process to produce bioethanol. G. latifolium and G. verrucosa were hydrolyzed using H2SO4 at concentrations of 1%, 2%, 3%, and 4%, at a temperature of 121 °C and a pressure of 1.5 bar for 45 minutes. The process of fermentation was done using Saccharomyces cerevisiae in anaerobic conditions for 4, 5, 6 and 7 days. The results show that the optimum H2SO4 concentrations to hydrolyze G. latifolium and G. verrucosa were 1% and 2% respectively. The number of S. cerevisiae cells in hydrolysate G. latifolium and G. verrucosa increased in the third adaptation. S. cerevisiae can convert sugar from G. latifolium and G. verrucosa into bioethanol through fermentation. The highest bioethanol yields were achieved on days five and six. Therefore, red macroalgae can be seen as a potential raw material for bioethanol production.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2016-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/1163</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2015.47.6.7</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 47 No. 6 (2015); 674-687</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/1163/1098</dc:relation>
</oai_dc:dc>