Melola Discovery

← Melola Discovery

Jurnal SINTA 1

A Reconstruction Method for Compressed Sampling in Shift-Invariant Spaces

Journal of Engineering and Technological Sciences · Vol. 48 No. 2 (2016) · hlm. 183–199

DOI
10.5614/j.eng.technol.sci.2016.48.2.5
ISSN
2338-5502, 2337-5779
Terbit
2016-05-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

A traditional sampling method is that the signal should be sampled at a rate exceeding twice the highest frequency. This is based on the assumption that the signal occupies the entire bandwidth. In practice, however, many signals are sparse so that only part of the bandwidth is used. Compressed sampling has been developed for low-rate sampling of continuous time sparse signals in shift-invariant spaces generated by m kernels with period T. However, in general the reconstruction of compressed sampling signals is unstable. To reconstruct the signal, continuous reconstruction is replaced by generalized inverse. In this paper, periodic non-uniform sampling and the reconstruction of functions in shift-invariant spaces are discussed, the unique sparse expression is obtained by using the minimal L1 norm. Also, necessary condition and error of reconstruction were analyzed. Finally, the method was validated via simulation and it was shown that the method was effective.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Chengdu University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Reconstruction Method for Compressed Sampling in Shift-Invariant Spaces</dc:title>
	<dc:creator>Luo, Junyi</dc:creator>
	<dc:creator>Yang, Yuting</dc:creator>
	<dc:description xml:lang="en-US">A traditional sampling method is that the signal should be sampled at a rate exceeding twice the highest frequency. This is based on the assumption that the signal occupies the entire bandwidth. In practice, however, many signals are sparse so that only part of the bandwidth is used. Compressed sampling has been developed for low-rate sampling of continuous time sparse signals in shift-invariant spaces generated by m kernels with period T. However, in general the reconstruction of compressed sampling signals is unstable. To reconstruct the signal, continuous reconstruction is replaced by generalized inverse. In this paper, periodic non-uniform sampling and the reconstruction of functions in shift-invariant spaces are discussed, the unique sparse expression is obtained by using the minimal L1 norm. Also, necessary condition and error of reconstruction were analyzed. Finally, the method was validated via simulation and it was shown that the method was effective.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2016-05-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/1305</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2016.48.2.5</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 48 No. 2 (2016); 183-199</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/1305/1210</dc:relation>
</oai_dc:dc>