Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng
Abstrak
In the process of GNSS deformation monitoring, it is inevitable that the monitoring data are contaminated by noise. Effectively mitigating the impact of noise on the measurements and thus improving the quality of the deformation data is the objective of GNSS data processing. Wavelet analysis can analyse the signal according to different frequencies of the signal. Simulation data can be used to determine the best wavelet basis function and select the appropriate decomposition level. In this paper, an improved threshold de-noising method is proposed, based on an analysis of conventional hard threshold de-noising, soft threshold de-noising and compulsory de-noising methods. The improved method was examined through a simulation analysis and applied in an engineering case. The results show that it effectively removed the noise at high frequencies while retaining data details and mutation. The de-noising ability of the proposed technique was better than that of the conventional methods. Moreover, this method significantly improved the quality of the deformation data.
Jaringan kolaborasi para penulis
5 penulis ·
10 tautan kepenulisan bersama
· 7 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
University of Science and Technology Liaoning
Northeastern University
Changchun University of Architecture and Civil Engineering
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulis
Organisasi
Artikel bersama
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.