Melola Discovery

← Melola Discovery

Jurnal SINTA 1

A Comprehensive Comparison Study of Empirical Cutting Transport Models in Inclined and Horizontal Wells

Journal of Engineering and Technological Sciences · Vol. 49 No. 2 (2017) · hlm. 275–289

DOI
10.5614/j.eng.technol.sci.2017.49.2.9
ISSN
2338-5502, 2337-5779
Terbit
2017-07-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

In deviated and horizontal drilling, hole-cleaning issues are a common and complex problem. This study explored the effect of various parameters in drilling operations and how they affect the flow rate required for effective cutting transport. Three models, developed following an empirical approach, were employed: Rudi-Shindu's model, Hopkins', and Tobenna's model. Rudi-Shindu's model needs iteration in the calculation. Firstly, the three models were compared using a sensitivity analysis of drilling parameters affecting cutting transport. The result shows that the models have similar trends but different values for minimum flow velocity. Analysis was conducted to examine the feasibility of using Rudi-Shindu's, Hopkins', and Tobenna's models. The result showed that Hopkins' model is limited by cutting size and revolution per minute (RPM). The minimum flow rate from Tobenna's model is affected only by well inclination, drilling fluid weight and drilling fluid rheological property. Meanwhile, Rudi-Shindu's model is limited by inclinations above 45°. The study showed that the investigated models are not suitable for horizontal wells because they do not include the effect of lateral section.

Kata kunci

Jaringan kolaborasi para penulis

20 penulis · 70 tautan kepenulisan bersama · 17 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Politeknik Energi dan Pertambangan Bandung
  • Padjadjaran University
  • IPB University
  • State University of Semarang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Megawati MegawatiState University of Semarang1
Tedi YunantoIPB University1
Suswanto SuswantoAfiliasi tidak diketahui1
AYU RATNA WULANSARIPoliteknik Energi dan Pertambangan Bandung1
Maryam Karomah BarorohPoliteknik Energi dan Pertambangan Bandung1
Melly Kusuma WardaniPoliteknik Energi dan Pertambangan Bandung1
Jihan ChoirunnisaPoliteknik Energi dan Pertambangan Bandung1
Samuel Zulkhifly SinagaBandung Institute of Technology1
Calvin Lumban GaolBandung Institute of Technology1
Gde Valdy Irawan ArimbawaBandung Institute of Technology1
Aristya Putra PamungkasBandung Institute of Technology1
Aldiano Falah HardamaBandung Institute of Technology1
Ricko RizkiaputraBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Comprehensive Comparison Study of Empirical Cutting Transport Models in Inclined and Horizontal Wells</dc:title>
	<dc:creator>Shiddiq, Asep Mohamad Ishaq</dc:creator>
	<dc:creator>Christiantoro, Brian</dc:creator>
	<dc:creator>Syafrie, Ildrem</dc:creator>
	<dc:creator>-, Abdurrokhim</dc:creator>
	<dc:creator>Marbun, Bonar Tua Halomoan</dc:creator>
	<dc:creator>Wattimury, Petra</dc:creator>
	<dc:creator>Resesiyanto, Hastowo</dc:creator>
	<dc:subject xml:lang="en-US">cutting transport</dc:subject>
	<dc:subject xml:lang="en-US">drilling parameters</dc:subject>
	<dc:subject xml:lang="en-US">hole cleaning</dc:subject>
	<dc:subject xml:lang="en-US">Hopkins’ model</dc:subject>
	<dc:subject xml:lang="en-US">horizontal wells</dc:subject>
	<dc:subject xml:lang="en-US">inclined wells</dc:subject>
	<dc:subject xml:lang="en-US">Rudi-Shindu’s model</dc:subject>
	<dc:subject xml:lang="en-US">Tobenna’s model</dc:subject>
	<dc:description xml:lang="en-US">In deviated and horizontal drilling, hole-cleaning issues are a common and complex problem. This study explored the effect of various parameters in drilling operations and how they affect the flow rate required for effective cutting transport. Three models, developed following an empirical approach, were employed: Rudi-Shindu's model, Hopkins', and Tobenna's model. Rudi-Shindu's model needs iteration in the calculation. Firstly, the three models were compared using a sensitivity analysis of drilling parameters affecting cutting transport. The result shows that the models have similar trends but different values for minimum flow velocity. Analysis was conducted to examine the feasibility of using Rudi-Shindu's, Hopkins', and Tobenna's models. The result showed that Hopkins' model is limited by cutting size and revolution per minute (RPM). The minimum flow rate from Tobenna's model is affected only by well inclination, drilling fluid weight and drilling fluid rheological property. Meanwhile, Rudi-Shindu's model is limited by inclinations above 45°. The study showed that the investigated models are not suitable for horizontal wells because they do not include the effect of lateral section.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2017-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/1551</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2017.49.2.9</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 49 No. 2 (2017); 275-289</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/1551/2814</dc:relation>
</oai_dc:dc>