Jurnal
SINTA 1
Tectonics and Geological Factors Controlling Cleat Development in the Barito Basin, Indonesia
Journal of Engineering and Technological Sciences · Vol. 49 No. 3 (2017) · hlm. 322–339
ISSN 2338-5502, 2337-5779
Terbit 2017-08-31
Penerbit Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa eng
Abstrak
Cleats are natural fractures within coal seams. This paper presents the results of regional cleat mapping and characterization in relation to coalbed methane (CBM) exploration and development in the Barito Basin, South Kalimantan, Indonesia involving two major coal layers, namely the Late Eocene Tanjung Formation and Early to Middle Miocene Warukin Formation with thicknesses ranging from 2 to 50 m. The coal is classified as lignite to subbituminous with calorific values ranging from 6000-8000 Cal/gr with ash content 0.68-17.42%. We applied two methods of cleat measurement, i.e. scanline and window sampling using a 100 x 100 cm grid. More than 20,000 cleats were measured from 65 scanline and 37 window sampling locations. The results revealed that face and butt cleats are predominantly oriented in the WNW-ESE and NNE-SSW directions, respectively. The results showed that cleat density increases related to structural position such as fold hinge and fault zone. The formation of the cleats may be influenced by several geological processes, where the cleats, which form during coalification, are superimposed by later processes such as fluid pressure and tectonic stresses and are seemingly also affected by the composition of the coal.
Jaringan kolaborasi para penulis
9 penulis ·
19 tautan kepenulisan bersama
· 10 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Bandung Institute of Technology Meteorological, Climatological, And Geophysical Agency Universitas Pertamina
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Tectonics and Geological Factors Controlling Cleat Development in the Barito Basin, Indonesia</dc:title>
<dc:creator>Sapiie, Benyamin</dc:creator>
<dc:creator>Rifiyanto, Arif</dc:creator>
<dc:subject xml:lang="en-US">Barito Basin</dc:subject>
<dc:subject xml:lang="en-US">coalbed methane</dc:subject>
<dc:subject xml:lang="en-US">cleats</dc:subject>
<dc:subject xml:lang="en-US">geology</dc:subject>
<dc:subject xml:lang="en-US">tectonics.</dc:subject>
<dc:description xml:lang="en-US">Cleats are natural fractures within coal seams. This paper presents the results of regional cleat mapping and characterization in relation to coalbed methane (CBM) exploration and development in the Barito Basin, South Kalimantan, Indonesia involving two major coal layers, namely the Late Eocene Tanjung Formation and Early to Middle Miocene Warukin Formation with thicknesses ranging from 2 to 50 m. The coal is classified as lignite to subbituminous with calorific values ranging from 6000-8000 Cal/gr with ash content 0.68-17.42%. We applied two methods of cleat measurement, i.e. scanline and window sampling using a 100 x 100 cm grid. More than 20,000 cleats were measured from 65 scanline and 37 window sampling locations. The results revealed that face and butt cleats are predominantly oriented in the WNW-ESE and NNE-SSW directions, respectively. The results showed that cleat density increases related to structural position such as fold hinge and fault zone. The formation of the cleats may be influenced by several geological processes, where the cleats, which form during coalification, are superimposed by later processes such as fluid pressure and tectonic stresses and are seemingly also affected by the composition of the coal.</dc:description>
<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
<dc:date>2017-08-31</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/3510</dc:identifier>
<dc:identifier>10.5614/j.eng.technol.sci.2017.49.3.3</dc:identifier>
<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 49 No. 3 (2017); 322-339</dc:source>
<dc:source>2338-5502</dc:source>
<dc:source>2337-5779</dc:source>
<dc:source>10.5614/j.eng.technol.sci.2017.49.3</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/3510/2961</dc:relation>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Sapiie, B., & Rifiyanto, A. (2017). Tectonics and Geological Factors Controlling Cleat Development in the Barito Basin, Indonesia. Journal of Engineering and Technological Sciences, 49(3), 322–339. https://doi.org/10.5614/j.eng.technol.sci.2017.49.3.3
Salin
IEEE
B. Sapiie and A. Rifiyanto, “Tectonics and Geological Factors Controlling Cleat Development in the Barito Basin, Indonesia,” Journal of Engineering and Technological Sciences, vol. 49, no. 3, pp. 322–339, 2017, doi: 10.5614/j.eng.technol.sci.2017.49.3.3.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.