Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Integration of MAFMA and AHP Methods for Analysis and Risk Mitigation of Pasteurized Milk Production

Journal of Engineering and Technological Sciences · Vol. 50 No. 5 (2018) · hlm. 670–683

DOI
10.5614/j.eng.technol.sci.2018.50.5.6
ISSN
2338-5502, 2337-5779
Terbit
2018-11-30
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Risk and uncertainty management is an important task in industry. Risks in raw materials such as livestock products may occur from the feed. The production process is also exposed to risks, which may be caused by controllable variables. In final products, uncontrollable actions may also pose risks. This research aimed to figure out the risks and their causes in the production process of milk and to discover applicable mitigation strategies. The methods used in this study were the Multi-Attribute Failure Mode Analysis (MAFMA) method to find the causes and Analytic Hierarchy Process (AHP) to discover mitigation strategies. The results were in the form of risks in the production process caused by: 1) raw materials, 2) the production process, 3) human resources, and 4) machinery and equipment. The highest risk in the production process is posed by undetected damage to machinery and contamination during the production process. However, both are rooted in human error: poorly trained workers, omission of checking or testing, and poor supervision of the process. Mitigation strategies, i.e. standardization and supervision of the raw materials, production process, and final product, were implemented to reduce the potential risks. In the implementation of these strategies, worker participation, either as controller or as supervisor, is very important.

Kata kunci

Jaringan kolaborasi para penulis

20 penulis · 58 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Universitas Syiah Kuala
  • State University of Jakarta
  • Diponegoro University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Izzum Wafi’uddinUniversity of Brawijaya1
Naila Maulidina Lu’ayyaUniversity of Brawijaya1
Annisa’u ChoirunAfiliasi tidak diketahui1
Siti Asmaul MustanirohUniversity of Brawijaya1
Dodyk PranowoUniversity of Brawijaya1
Ainur RofiqUniversity of Brawijaya1
Zulkarnain JalilUniversitas Syiah Kuala1
Erfan HandokoState University of Jakarta1
A B IsmailUniversitas Syiah Kuala1
Retno AstutiUniversity of Brawijaya1
Arif HidayatDiponegoro University1
Muhammad Arif KamalUniversity of Brawijaya1
Usman EffendiUniversity of Brawijaya1
Aunur Rofiq MulyartoUniversity of Brawijaya1
Mas’ud EffendiUniversity of Brawijaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Integration of MAFMA and AHP Methods for Analysis and Risk Mitigation of Pasteurized Milk Production</dc:title>
	<dc:creator>Santoso, Imam</dc:creator>
	<dc:creator>Sa'adah, Miftahus</dc:creator>
	<dc:creator>Sari, Eva Novita</dc:creator>
	<dc:creator>Prameswari, Puspa Ayu Indah</dc:creator>
	<dc:creator>Agustina, Chintya Rizki</dc:creator>
	<dc:subject xml:lang="en-US">AHP</dc:subject>
	<dc:subject xml:lang="en-US">MAFMA</dc:subject>
	<dc:subject xml:lang="en-US">production process</dc:subject>
	<dc:subject xml:lang="en-US">pasteurized milk</dc:subject>
	<dc:subject xml:lang="en-US">risk analysis</dc:subject>
	<dc:subject xml:lang="en-US">risk mitigation.</dc:subject>
	<dc:description xml:lang="en-US">Risk and uncertainty management is an important task in industry. Risks in raw materials such as livestock products may occur from the feed. The production process is also exposed to risks, which may be caused by controllable variables. In final products, uncontrollable actions may also pose risks. This research aimed to figure out the risks and their causes in the production process of milk and to discover applicable mitigation strategies. The methods used in this study were the Multi-Attribute Failure Mode Analysis (MAFMA) method to find the causes and Analytic Hierarchy Process (AHP) to discover mitigation strategies. The results were in the form of risks in the production process caused by: 1) raw materials, 2) the production process, 3) human resources, and 4) machinery and equipment. The highest risk in the production process is posed by undetected damage to machinery and contamination during the production process. However, both are rooted in human error: poorly trained workers, omission of checking or testing, and poor supervision of the process. Mitigation strategies, i.e. standardization and supervision of the raw materials, production process, and final product, were implemented to reduce the potential risks. In the implementation of these strategies, worker participation, either as controller or as supervisor, is very important.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2018-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/4061</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2018.50.5.6</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 50 No. 5 (2018); 670-683</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2018.50.5</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/4061/3795</dc:relation>
</oai_dc:dc>