Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Head Injury Analysis of Vehicle Occupant in Frontal Crash Simulation: Case Study of ITB’s Formula SAE Race Car

Journal of Engineering and Technological Sciences · Vol. 49 No. 4 (2017) · hlm. 534–545

DOI
10.5614/j.eng.technol.sci.2017.49.4.8
ISSN
2338-5502, 2337-5779
Terbit
2017-10-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

In the present study, frontal crash simulations were conducted to determine the effect of various car speeds against the Head Injury Criterion (HIC), a measure of the likelihood of head injury arising from impact. The frontal impact safety of ITB's formula SAE race car designed by students was evaluated as a case study. LS-DYNA®, an explicit finite element code for non-linear dynamic analysis was utilized in the analysis. To analyze head injury, a two-step simulation was conducted. In the first step, a full-frontal barrier test was simulated without incorporating a dummy inside the car. The output was the deceleration data of the car, which was used as input in the second step, a sled test simulation. In the sled test, only the cockpit and dummy were modeled. The effect of deceleration to the head of the dummy was then evaluated. The results show that HIC values at an impact speed of 7 m/s (25 km/h) to 11 m/s (40 km/h) were below the safe limit and still in the safe zone. However, the HIC values will exceed the safe limit when the speed of impact is the same as or greater than 12 m/s (43 km/h).

Kata kunci

Jaringan kolaborasi para penulis

31 penulis · 102 tautan kepenulisan bersama · 22 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Padjadjaran University
  • Institut National de Police Scientifique
  • Dr. Hasan Sadikin General Hospital
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Satrio WicaksonoBandung Institute of Technology4
Leonardo GunawanBandung Institute of Technology2
Edgar Buwana SutawikaBandung Institute of Technology2
I. IndrawantoBandung Institute of Technology2
F. FerryantoBandung Institute of Technology2
Hari UtomoBandung Institute of Technology2
Syarif HidayatBandung Institute of Technology2
Jam’ah HalidBandung Institute of Technology2
Mipi Ananta KusumaBandung Institute of Technology2
Reza Widianto SudjudDr. Hasan Sadikin General Hospital2
Ike Sri RejekiPadjadjaran University2
Sri RaharnoBandung Institute of Technology2
Dadang RukantaBandung Institute of Technology2
Hari TjahjonoAfiliasi tidak diketahui2
Andhika DhaniswaraBandung Institute of Technology2
Gantini SubrataPadjadjaran University1
Zulia HasratiningsihPadjadjaran University1
Erna KurnikasariPadjadjaran University1
Sigit Puji SantosaBandung Institute of Technology1
Febrianto Guntur SunotoInstitut National de Police Scientifique1
Siska PrifiharniBandung Institute of Technology1
M. Rizka Faisal RahmanBandung Institute of Technology1
Nur Ridhwan MuharramBandung Institute of Technology1
Hermawan JudawisastraBandung Institute of Technology1
Muhammad Hamzah FarrasamulyaBandung Institute of Technology1
Andi KuswoyoBandung Institute of Technology1
Afdhal AfdhalAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Head Injury Analysis of Vehicle Occupant in Frontal Crash Simulation: Case Study of ITB’s Formula SAE Race Car</dc:title>
	<dc:creator>Mihradi, Sandro</dc:creator>
	<dc:creator>Golfianto, Hari</dc:creator>
	<dc:creator>Mahyuddin, Andi Isra</dc:creator>
	<dc:creator>Dirgantara, Tatacipta</dc:creator>
	<dc:subject xml:lang="en-US">finite element analysis</dc:subject>
	<dc:subject xml:lang="en-US">frontal collision</dc:subject>
	<dc:subject xml:lang="en-US">FSAE</dc:subject>
	<dc:subject xml:lang="en-US">head injury</dc:subject>
	<dc:subject xml:lang="en-US">impact attenuator</dc:subject>
	<dc:subject xml:lang="en-US">sled test.</dc:subject>
	<dc:description xml:lang="en-US">In the present study, frontal crash simulations were conducted to determine the effect of various car speeds against the Head Injury Criterion (HIC), a measure of the likelihood of head injury arising from impact. The frontal impact safety of ITB's formula SAE race car designed by students was evaluated as a case study. LS-DYNA®, an explicit finite element code for non-linear dynamic analysis was utilized in the analysis. To analyze head injury, a two-step simulation was conducted. In the first step, a full-frontal barrier test was simulated without incorporating a dummy inside the car. The output was the deceleration data of the car, which was used as input in the second step, a sled test simulation. In the sled test, only the cockpit and dummy were modeled. The effect of deceleration to the head of the dummy was then evaluated. The results show that HIC values at an impact speed of 7 m/s (25 km/h) to 11 m/s (40 km/h) were below the safe limit and still in the safe zone. However, the HIC values will exceed the safe limit when the speed of impact is the same as or greater than 12 m/s (43 km/h).</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2017-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/6046</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2017.49.4.8</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 49 No. 4 (2017); 534-545</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2017.49.4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/6046/2989</dc:relation>
</oai_dc:dc>