Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Influence of Electrode Distance on Electrical Energy Production of Microbial Fuel Cell using Tapioca Wastewater

Journal of Engineering and Technological Sciences · Vol. 50 No. 6 (2019) · hlm. 841–855

DOI
10.5614/j.eng.technol.sci.2018.50.6.7
ISSN
2338-5502, 2337-5779
Terbit
2019-12-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Microbial fuel cell is one alternative technology that can be used to simultaneously solve problems related with wastewater production and energy demand. This study investigates the influence of electrode distance on power density in microbial fuel cell using tapioca wastewater. Graphite sheet without metal catalyst was used for both electrodes, separated by Nafion membranes. Four variations of electrode distance were used. MFC with highest electrode distance give the highest equilibrium OCV (676 mV), while the MFC with shortest electrode distance give the highest power density (7.74 mW/m2). EIS measurement suggested that the charge transfer resistance is dominant in all MFC configuration. Wastewater COD removal were in the range of 35-46 %, which were in accordance with the power density for all MFC.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 114 tautan kepenulisan bersama · 42 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Lampung University
  • Kementerian Energi dan Sumber Daya Mineral
  • Sumatera Institute of Technology
  • Korea Institute of Science and Technology
  • Hirosaki University
  • IHE Delft Institute for Water Education
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Pramujo WidiatmokoBandung Institute of Technology7
Made Tri Ari Penia KresnowatiBandung Institute of Technology4
Tirto PrakosoBandung Institute of Technology4
Isdiriayani NurdinBandung Institute of Technology3
Dadan KusdianaKementerian Energi dan Sumber Daya Mineral2
Mitra EvianiKementerian Energi dan Sumber Daya Mineral2
Heri RustamajiLampung University2
Fauzi YusupandiSumatera Institute of Technology2
Vita WonoputriBandung Institute of Technology2
Christian AslanBandung Institute of Technology2
Sri Yulina WulandariBandung Institute of Technology1
Arwin SabarBandung Institute of Technology1
B. KurniawanAfiliasi tidak diketahui1
I. G. B. N. MakertiharthaBandung Institute of Technology1
Ibnu Maulana HidayatullahBandung Institute of Technology1
Jenny RizkianaBandung Institute of Technology1
Guoqing GuanHirosaki University1
Sung Pil YoonKorea Institute of Science and Technology1
Tae‐Hoon LimKorea Institute of Science and Technology1
Aditya Farhan ArifAfiliasi tidak diketahui1
Khairul Hadi BurhanBandung Institute of Technology1
Noviani Arifina IstiqomahBandung Institute of Technology1
Rendy MuktiBandung Institute of Technology1
Darmansyah DarmansyahLampung University1
Pramahadi FebriyantoSumatera Institute of Technology1
Simparmin Br GintingLampung University1
Hendro RisdiantoBandung Institute of Technology1
Elis SofiantiBandung Institute of Technology1
Sri Harjati SuhardiBandung Institute of Technology1
Yoke Pean ThyeBandung Institute of Technology1
Agus Jatnika EffendiBandung Institute of Technology1
Prayatni SoewondoBandung Institute of Technology1
Damir BrdjanovićIHE Delft Institute for Water Education1
Ridho Eka YandraAfiliasi tidak diketahui1
Tan Mellisa TantraBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Influence of Electrode Distance on Electrical Energy Production of Microbial Fuel Cell using Tapioca Wastewater</dc:title>
	<dc:creator>Harimawan, Ardiyan</dc:creator>
	<dc:creator>Devianto, Hary</dc:creator>
	<dc:creator>Al-Aziz, Rd. Habib R. M. T.</dc:creator>
	<dc:creator>Shofinita, Dian</dc:creator>
	<dc:creator>Setiadi, Tjandra</dc:creator>
	<dc:subject xml:lang="en-US">COD removal</dc:subject>
	<dc:subject xml:lang="en-US">electrode distance</dc:subject>
	<dc:subject xml:lang="en-US">microbial fuel cell</dc:subject>
	<dc:subject xml:lang="en-US">power density</dc:subject>
	<dc:subject xml:lang="en-US">tapioca wastewater.</dc:subject>
	<dc:description xml:lang="en-US">Microbial fuel cell is one alternative technology that can be used to simultaneously solve problems related with wastewater production and energy demand. This study investigates the influence of electrode distance on power density in microbial fuel cell using tapioca wastewater. Graphite sheet without metal catalyst was used for both electrodes, separated by Nafion membranes. Four variations of electrode distance were used. MFC with highest electrode distance give the highest equilibrium OCV (676 mV), while the MFC with shortest electrode distance give the highest power density (7.74 mW/m2). EIS measurement suggested that the charge transfer resistance is dominant in all MFC configuration. Wastewater COD removal were in the range of 35-46 %, which were in accordance with the power density for all MFC.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2019-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/7503</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2018.50.6.7</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 50 No. 6 (2018); 841-855</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2018.50.6</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/7503/3834</dc:relation>
</oai_dc:dc>