Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Advancement in the Analysis of Seepage through Cracked Soils

Journal of Engineering and Technological Sciences · Vol. 50 No. 4 (2018) · hlm. 566–577

DOI
10.5614/j.eng.technol.sci.2018.50.4.8
ISSN
2338-5502, 2337-5779
Terbit
2018-10-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Seepage is an important problem analyzed in geotechnical engineering. Conventionally, the analysis is performed in conditions where the soil is intact. The presence of desiccated cracks requires a seepage analysis that considers not only the soil matrix part of the cracked soil but also the crack network. Currently, there are three approaches in the analysis of seepage through cracked soils: (i) analysis by modeling the cracked soil as an intact material with cracks being represented as macropores; (ii) analysis by modeling the cracked soil as a material with a bimodal pore-size distribution; and (iii) analysis by modeling two components of the cracked soil separately: the soil matrix and the crack network. Each approach is reviewed and discussed in this paper. It was found that each approach is suitable for specific cases: (i) the first method is suitable for seepage analysis of cracked soil deep below the ground surface; (ii) the second method is suitable for seepage analysis of cracked soil at the ground surface under a drying process; (iii) the third method is suitable for seepage analysis of cracked soil at the ground surface experiencing rainwater infiltration. Choosing the appropriate method is essential in modeling the appropriate seepage mechanism.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 72 tautan kepenulisan bersama · 11 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Nanyang Technological University
  • National Institute of Science and Technology
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tita Kartika DewiBandung Institute of Technology1
Hasbullah NawirBandung Institute of Technology1
Dayu ApojiBandung Institute of Technology1
Laras Dipa PramuditaBandung Institute of Technology1
Shafira Annisa PutriBandung Institute of Technology1
Lindawati LindawatiBandung Institute of Technology1
Masyhur IrsyamBandung Institute of Technology1
Rendy Dwi KartikoBandung Institute of Technology1
Arif Rahman Hakim SitepuBandung Institute of Technology1
Mohammad Anwar FathoniBandung Institute of Technology1
Ina Asha NurjanahBandung Institute of Technology1
Maudy Anisa FananiBandung Institute of Technology1
Alexander Wicaksono BudiartoBandung Institute of Technology1
Idrus Muhammad AlatasNational Institute of Science and Technology1
Sahlan Safar Insanul Zhafir RuhyanaBandung Institute of Technology1
Chrysti Adi WicaksonoBandung Institute of Technology1
Muhammad Ikhsan MusliminBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Advancement in the Analysis of Seepage through Cracked Soils</dc:title>
	<dc:creator>Krisnanto, Sugeng</dc:creator>
	<dc:creator>Rahardjo, Harianto</dc:creator>
	<dc:subject xml:lang="en-US">cracked soils</dc:subject>
	<dc:subject xml:lang="en-US">methodology of analysis</dc:subject>
	<dc:subject xml:lang="en-US">numerical model</dc:subject>
	<dc:subject xml:lang="en-US">seepage</dc:subject>
	<dc:subject xml:lang="en-US">unsaturated soils</dc:subject>
	<dc:subject xml:lang="en-US">water content.</dc:subject>
	<dc:description xml:lang="en-US">Seepage is an important problem analyzed in geotechnical engineering. Conventionally, the analysis is performed in conditions where the soil is intact. The presence of desiccated cracks requires a seepage analysis that considers not only the soil matrix part of the cracked soil but also the crack network. Currently, there are three approaches in the analysis of seepage through cracked soils: (i) analysis by modeling the cracked soil as an intact material with cracks being represented as macropores; (ii) analysis by modeling the cracked soil as a material with a bimodal pore-size distribution; and (iii) analysis by modeling two components of the cracked soil separately: the soil matrix and the crack network. Each approach is reviewed and discussed in this paper. It was found that each approach is suitable for specific cases: (i) the first method is suitable for seepage analysis of cracked soil deep below the ground surface; (ii) the second method is suitable for seepage analysis of cracked soil at the ground surface under a drying process; (iii) the third method is suitable for seepage analysis of cracked soil at the ground surface experiencing rainwater infiltration. Choosing the appropriate method is essential in modeling the appropriate seepage mechanism.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2018-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/8968</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2018.50.4.8</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 50 No. 4 (2018); 566-577</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/8968/3479</dc:relation>
</oai_dc:dc>