Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effect of Nanocrystalline Cellulose (NCC) Filler on Polylactic Acid (PLA) Nanocomposite Properties

Journal of Engineering and Technological Sciences · Vol. 50 No. 4 (2018) · hlm. 578–587

DOI
10.5614/j.eng.technol.sci.2018.50.4.9
ISSN
2338-5502, 2337-5779
Terbit
2018-10-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

This paper discusses the effect of nanocrystalline cellulose (NCC) when used as filler on polylactic acid (PLA)-based nanocomposites and on its mechanical properties and permeability. NCC was produced from commercial cellulose and another cellulose source, i.e. oil palm empty fruit bunch, by hydrolysis of microcrystalline cellulose with sulphuric acid and by oxidation with ammonium persulfate. The nanocomposites were made by adding nanocrystalline cellulose with varying compositions into PLA. A solvent casting method was used to produce a nanocomposite film with 5% v/v triacetin as a coupling agent. Both methods produced crystalline celluloses within the micro and nano range with mean particle size at 99.5 nm and 157.9 nm for the sulphuric acid hydrolysis and the ammonium persulfate oxidation method, respectively. The utilization of NCC as PLA composite filler increased the percentage of elongation at break with a highest percentage 19.02% for addition of 1% NCC filler. However, higher compositions of cellulosic filler resulted in a decreasing trend of tensile strength and elongation at break. Higher content of NCC filler in the PLA matrix increased the nanocomposite's water vapor permeability.

Kata kunci

Jaringan kolaborasi para penulis

27 penulis · 73 tautan kepenulisan bersama · 11 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Korea Research Institute of Bioscience and Biotechnology
  • Diponegoro University
  • Nanyang Technological University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Daniel PrasetyoBandung Institute of Technology4
Hermawan PrajitnoBandung Institute of Technology4
Matthew W. ChangNanyang Technological University2
Yook Chan KimAfiliasi tidak diketahui2
Rizki InsyaniBandung Institute of Technology2
Rizky InsyaniBandung Institute of Technology2
Widayat WidayatDiponegoro University1
Tatang Hernas SoerawidjajaBandung Institute of Technology1
H. RahmanAfiliasi tidak diketahui1
Astri Nur IstyamiBandung Institute of Technology1
R. MuhtadiBandung Institute of Technology1
H.W. LeeKorea Research Institute of Bioscience and Biotechnology1
Tutus GusdinarBandung Institute of Technology1
Kusnandar AnggadiredjaBandung Institute of Technology1
Hamidah RahmanAfiliasi tidak diketahui1
Tursino TursinoBandung Institute of Technology1
Retno Gumilang DewiBandung Institute of Technology1
Megawati ZunitaBandung Institute of Technology1
Permata A. PriyadiBandung Institute of Technology1
Michael D.M. SitompulBandung Institute of Technology1
Annisa N. ShabrinaBandung Institute of Technology1
Faiq I. AkhirotiBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Nanocrystalline Cellulose (NCC) Filler on Polylactic Acid (PLA) Nanocomposite Properties</dc:title>
	<dc:creator>Simangunsong, Daniel I.</dc:creator>
	<dc:creator>Hutapea, Try H. A.</dc:creator>
	<dc:creator>Lee, Hyung Woo</dc:creator>
	<dc:creator>Ahn, Jung Oh</dc:creator>
	<dc:creator>Sitompul, Johnner</dc:creator>
	<dc:subject xml:lang="en-US">oil palm empty fruit bunch</dc:subject>
	<dc:subject xml:lang="en-US">ammonium persulfate oxidation</dc:subject>
	<dc:subject xml:lang="en-US">sulphuric acid hydrolysis</dc:subject>
	<dc:subject xml:lang="en-US">nanocrystalline cellulose</dc:subject>
	<dc:subject xml:lang="en-US">solvent casting</dc:subject>
	<dc:subject xml:lang="en-US">PLA-NCC nanocomposite</dc:subject>
	<dc:description xml:lang="en-US">This paper discusses the effect of nanocrystalline cellulose (NCC) when used as filler on polylactic acid (PLA)-based nanocomposites and on its mechanical properties and permeability. NCC was produced from commercial cellulose and another cellulose source, i.e. oil palm empty fruit bunch, by hydrolysis of microcrystalline cellulose with sulphuric acid and by oxidation with ammonium persulfate. The nanocomposites were made by adding nanocrystalline cellulose with varying compositions into PLA. A solvent casting method was used to produce a nanocomposite film with 5% v/v triacetin as a coupling agent. Both methods produced crystalline celluloses within the micro and nano range with mean particle size at 99.5 nm and 157.9 nm for the sulphuric acid hydrolysis and the ammonium persulfate oxidation method, respectively. The utilization of NCC as PLA composite filler increased the percentage of elongation at break with a highest percentage 19.02% for addition of 1% NCC filler. However, higher compositions of cellulosic filler resulted in a decreasing trend of tensile strength and elongation at break. Higher content of NCC filler in the PLA matrix increased the nanocomposite's water vapor permeability.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2018-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/8969</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2018.50.4.9</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 50 No. 4 (2018); 578-587</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/8969/3481</dc:relation>
</oai_dc:dc>