Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Performance Evaluation of Homogeneous Charge Compression Ignition Combustion Engine - A Review

Journal of Engineering and Technological Sciences · Vol. 52 No. 3 (2020) · hlm. 289–309

DOI
10.5614/j.eng.technol.sci.2020.52.3.1
ISSN
2338-5502, 2337-5779
Terbit
2020-06-25
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

The development of HCCI combustion technology has been drawing a great deal of attention from researchers. This survey explains ongoing research methodologies and results. HCCI combustion, other than conventional combustion, is purely based on chemical kinetics. At present the automobile sector faces the problem of emissions and needs to develop clean technologies. However, HCCI operation still has issues such as ignition control, combustion phasing control, operating range control, cold start, and UHC (unburned hydrocarbon) and CO (carbon monoxide) emissions. The challenge is to overcome these problems without compromising other engine parameters and performance. For HCCI, the mixture preparation is especially important, while the compression ratio, IVC (inlet valve closure) timing, inlet pressure, inlet temperature and EGR play a very prominent role in controlling it. This paper will go through a detailed discussion of all the above conditions.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 11 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Manipal Academy of Higher Education
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Laxmikant G. KeniManipal Academy of Higher Education2
Harishkumar KamatManipal Academy of Higher Education1
B. Satish ShenoyManipal Academy of Higher Education1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Performance Evaluation of Homogeneous Charge Compression Ignition Combustion Engine - A Review</dc:title>
	<dc:creator>Kodancha, Pradyumna</dc:creator>
	<dc:creator>Pai, Anand</dc:creator>
	<dc:creator>Kini, Chandrakant R</dc:creator>
	<dc:creator>Bayar, Rajesh K</dc:creator>
	<dc:subject xml:lang="en-US">combustion</dc:subject>
	<dc:subject xml:lang="en-US">EGR</dc:subject>
	<dc:subject xml:lang="en-US">HCCI</dc:subject>
	<dc:subject xml:lang="en-US">inlet pressure</dc:subject>
	<dc:subject xml:lang="en-US">inlet temperature</dc:subject>
	<dc:subject xml:lang="en-US">IVC</dc:subject>
	<dc:description xml:lang="en-US">The development of HCCI combustion technology has been drawing a great deal of attention from researchers. This survey explains ongoing research methodologies and results. HCCI combustion, other than conventional combustion, is purely based on chemical kinetics. At present the automobile sector faces the problem of emissions and needs to develop clean technologies. However, HCCI operation still has issues such as ignition control, combustion phasing control, operating range control, cold start, and UHC (unburned hydrocarbon) and CO (carbon monoxide) emissions. The challenge is to overcome these problems without compromising other engine parameters and performance. For HCCI, the mixture preparation is especially important, while the compression ratio, IVC (inlet valve closure) timing, inlet pressure, inlet temperature and EGR play a very prominent role in controlling it. This paper will go through a detailed discussion of all the above conditions.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2020-06-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/10109</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2020.52.3.1</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 52 No. 3 (2020); 289-309</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2020.52.3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/10109/pdf_68</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>