Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Layer Stripping in Magnetotellurics (MT) for Enhancement of Resistivity Change Effect in Reservoir: Equivalence Analysis

Journal of Engineering and Technological Sciences · Vol. 52 No. 2 (2020) · hlm. 258–270

DOI
10.5614/j.eng.technol.sci.2020.52.2.9
ISSN
2338-5502, 2337-5779
Terbit
2020-04-30
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Magnetotellurics (MT) can be applied to monitor resistivity change at depth that is for example due to fluid injection in enhanced oil recovery or CO2 storage. The observed MT data changes at the surface may be insignificant, but the effect can be enhanced using the layer stripping method, i.e. calculating MT data changes that would be observed at depth based on data from the surface. Two well-known formulas for MT 1D forward modeling were reformulated to allow for calculation of the impedance at depth based on the impedance at the surface. We applied the layer stripping technique to synthetic data associated with models that were representative of a likely CO2 storage site. We also used an equivalent model and the Monte Carlo approach to estimate the sensitivity of the method to cope with the uncertainty of the host model and the input data. The layer stripping calculation has the greatest uncertainty at short periods, where the real and imaginary parts of the complex impedance tend to be equal, i.e. an homogeneous medium response. The layer stripping technique should be used with great caution based on a relatively precise 1D host model.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 59 tautan kepenulisan bersama · 21 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Badan Geologi
  • Sumatera Institute of Technology
  • National Research and Innovation Agency
  • Pusat Air Tanah dan Geologi Tata Lingkungan
  • Institute for Geothermal Sciences, Graduate School of Science, Kyoto University
  • Institut Teknologi Sepuluh Nopember
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Edy WijanarkoAfiliasi tidak diketahui6
Ilham ArisbayaNational Research and Innovation Agency5
Darharta DahrinBandung Institute of Technology4
Wahyudi Widyatmoko ParnadiBandung Institute of Technology3
Djoko SantosoBandung Institute of Technology2
WarsaAfiliasi tidak diketahui2
Acep RuchimatPusat Air Tanah dan Geologi Tata Lingkungan1
Mira NailufarBandung Institute of Technology1
Neng E. JubaedahBandung Institute of Technology1
Accep HandyarsoBadan Geologi1
Wahyu SrigutomoBandung Institute of Technology1
Acep PurqonBandung Institute of Technology1
Cahyo Aji HapsoroBandung Institute of Technology1
Doddy SutarnoBandung Institute of Technology1
Tsuneomi KagiyamaInstitute for Geothermal Sciences, Graduate School of Science, Kyoto University1
Selvi Misnia IrawatiSumatera Institute of Technology1
Hidayat HidayatBadan Geologi1
Sungkono SungkonoInstitut Teknologi Sepuluh Nopember1
Prihadi SumintadiredjaAfiliasi tidak diketahui1
Diky IrawanBandung Institute of Technology1
G.M. Lucki JunursyahBadan Geologi1
Alviyanda AlviyandaSumatera Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Layer Stripping in Magnetotellurics (MT) for Enhancement of Resistivity Change Effect  in Reservoir: Equivalence Analysis</dc:title>
	<dc:creator>Grandis, Hendra</dc:creator>
	<dc:creator>Warsa, W</dc:creator>
	<dc:creator>Sumintadireja, Prihadi</dc:creator>
	<dc:subject xml:lang="en-US">alternative MT modeling</dc:subject>
	<dc:subject xml:lang="en-US">anomaly enhancement</dc:subject>
	<dc:subject xml:lang="en-US">MT impedance</dc:subject>
	<dc:subject xml:lang="en-US">resistivity monitoring</dc:subject>
	<dc:subject xml:lang="en-US">time lapse</dc:subject>
	<dc:description xml:lang="en-US">Magnetotellurics (MT) can be applied to monitor resistivity change at depth that is for example due to fluid injection in enhanced oil recovery or CO2 storage. The observed MT data changes at the surface may be insignificant, but the effect can be enhanced using the layer stripping method, i.e. calculating MT data changes that would be observed at depth based on data from the surface. Two well-known formulas for MT 1D forward modeling were reformulated to allow for calculation of the impedance at depth based on the impedance at the surface. We applied the layer stripping technique to synthetic data associated with models that were representative of a likely CO2 storage site. We also used an equivalent model and the Monte Carlo approach to estimate the sensitivity of the method to cope with the uncertainty of the host model and the input data. The layer stripping calculation has the greatest uncertainty at short periods, where the real and imaginary parts of the complex impedance tend to be equal, i.e. an homogeneous medium response. The layer stripping technique should be used with great caution based on a relatively precise 1D host model.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2020-04-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/11447</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2020.52.2.9</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 52 No. 2 (2020); 258-270</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2020.52.2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/11447/pdf_65</dc:relation>
</oai_dc:dc>