Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Strength and Deformation Characteristics of Reconstituted Sand under Different Stress Paths in True Triaxial Tests

Journal of Engineering and Technological Sciences · Vol. 52 No. 6 (2020) · hlm. 907–929

DOI
10.5614/j.eng.technol.sci.2020.52.6.10
ISSN
2338-5502, 2337-5779
Terbit
2020-11-30
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

To improve the geotechnical stress"“strain analysis, the stress"“strain behavior of geomaterial under general three-dimensional stress conditions prevailing in the field need to be captured. The true triaxial apparatus is an enhanced version of the conventional triaxial apparatus, which allows to simulate stresses by applying loadings independently in 3 orthogonal directions. This study evaluated the strength and deformation behavior of Bangka sand under true triaxial test conditions. The test specimens were prepared by means of the multi-sieve sand pluviation method. Various true triaxial test stress paths were applied under axial compression, lateral extension, axial extension, and lateral compression with the objective of understanding and developing the empirical correlation of coarse-grained soil strength parameters in axial compression stress paths related to other stress paths. The test results showed that an increase in the value of b, the parameter used to quantify the relative magnitude of the intermediate principal stress to the other principal stresses, resulted in an increase of the internal friction angle and a decrease of the peak stress ratio. In addition it was observed that the Lade-Duncan failure criterion fitted the results of this study better than other failure criteria, namely the extended von Mises, Mohr-Coulomb, and Matsuoka-Nakai failure criteria.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 42 tautan kepenulisan bersama · 17 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • University of Bengkulu
  • Institute of Industrial Science, The University of Tokyo
  • Universitas Sembilanbelas November Kolaka
  • Japan International Cooperation Agency
  • Ministry of Land, Infrastructure, Transport and Tourism
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dayu ApojiBandung Institute of Technology2
Riska EkawitaUniversity of Bengkulu1
Khairurrijal KhairurrijalBandung Institute of Technology1
Masyhur IrsyamBandung Institute of Technology1
Hendriyawan HendriyawanBandung Institute of Technology1
Rena MisliniyatiUniversity of Bengkulu1
Endra SusilaBandung Institute of Technology1
Muhammad Yoke SyahputraBandung Institute of Technology1
Karina Meilawati Eka PutriBandung Institute of Technology1
Risqi Faris HidayatInstitute of Industrial Science, The University of Tokyo1
Takashi KiyotaInstitute of Industrial Science, The University of Tokyo1
Naoto TadaJapan International Cooperation Agency1
Jun HayakawaMinistry of Land, Infrastructure, Transport and Tourism1
Tita Kartika DewiBandung Institute of Technology1
Sugeng KrisnantoBandung Institute of Technology1
Laras Dipa PramuditaBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Strength and Deformation Characteristics of Reconstituted Sand under Different Stress Paths in True Triaxial Tests</dc:title>
	<dc:creator>Nawir, Hasbullah</dc:creator>
	<dc:creator>Prasetyo, Bagus Eko</dc:creator>
	<dc:creator>Sahadewa, Andhika</dc:creator>
	<dc:subject xml:lang="en-US">reconstituted sand</dc:subject>
	<dc:subject xml:lang="en-US">true triaxial test</dc:subject>
	<dc:subject xml:lang="en-US">stress path.</dc:subject>
	<dc:description xml:lang="en-US">To improve the geotechnical stress"“strain analysis, the stress"“strain behavior of geomaterial under general three-dimensional stress conditions prevailing in the field need to be captured. The true triaxial apparatus is an enhanced version of the conventional triaxial apparatus, which allows to simulate stresses by applying loadings independently in 3 orthogonal directions. This study evaluated the strength and deformation behavior of Bangka sand under true triaxial test conditions. The test specimens were prepared by means of the multi-sieve sand pluviation method. Various true triaxial test stress paths were applied under axial compression, lateral extension, axial extension, and lateral compression with the objective of understanding and developing the empirical correlation of coarse-grained soil strength parameters in axial compression stress paths related to other stress paths. The test results showed that an increase in the value of b, the parameter used to quantify the relative magnitude of the intermediate principal stress to the other principal stresses, resulted in an increase of the internal friction angle and a decrease of the peak stress ratio. In addition it was observed that the Lade-Duncan failure criterion fitted the results of this study better than other failure criteria, namely the extended von Mises, Mohr-Coulomb, and Matsuoka-Nakai failure criteria.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2020-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/12925</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2020.52.6.10</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 52 No. 6 (2020); 907-929</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2020.52.6</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/12925/pdf_107</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>