Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Experimental Study and Numerical Model of Spruce and Teak Wood Strength Properties Under Compressive High Strain Rate Loading

Journal of Engineering and Technological Sciences · Vol. 53 No. 1 (2021)

DOI
10.5614/j.eng.technol.sci.2021.53.1.3
ISSN
2338-5502, 2337-5779
Terbit
2021-01-26
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Spruce and teak wood as anisotropic materials have complex behavior, particularly in the relationship between strain-rate and strength. High strain-rate compression tests between 590 s-1 and 3300 s-1 were carried out using two types of split Hopkinson pressure bar (SPHB) in order to measure the behavior of the wood along three principal axes with respect to fiber direction and growth rings. Numerical simulation using finite element software of the wood materials under high strain rates was performed and showed results with only a difference of 10% to the experimental results. The strain rate affects the strength of materials. In this case, it follows the power function, which means the higher the strain rate, the stronger the material.

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 18 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Ministerio de Transportes, Movilidad y Agenda Urbana
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bambang BudionoBandung Institute of Technology1
Iswandi ImranBandung Institute of Technology1
Herwani HerwaniBandung Institute of Technology1
Made SuarjanaBandung Institute of Technology1
Indra Djati SidiBandung Institute of Technology1
Widi NugrahaMinisterio de Transportes, Movilidad y Agenda Urbana1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Experimental Study and Numerical Model of Spruce and Teak Wood Strength Properties Under Compressive High Strain Rate Loading</dc:title>
	<dc:creator>Zulkifli, Ediansjah</dc:creator>
	<dc:creator>Kusumaningrum, Patria</dc:creator>
	<dc:creator>Puspita Rahmi, Diah</dc:creator>
	<dc:subject xml:lang="en-US">compressive load</dc:subject>
	<dc:subject xml:lang="en-US">finite element</dc:subject>
	<dc:subject xml:lang="en-US">high strain rate</dc:subject>
	<dc:subject xml:lang="en-US">mechanical behavior</dc:subject>
	<dc:subject xml:lang="en-US">split Hopkinson pressure bar</dc:subject>
	<dc:subject xml:lang="en-US">spruce and teak wood</dc:subject>
	<dc:description xml:lang="en-US">Spruce and teak wood as anisotropic materials have complex behavior, particularly in the relationship between strain-rate and strength. High strain-rate compression tests between 590 s-1 and 3300 s-1 were carried out using two types of split Hopkinson pressure bar (SPHB) in order to measure the behavior of the wood along three principal axes with respect to fiber direction and growth rings. Numerical simulation using finite element software of the wood materials under high strain rates was performed and showed results with only a difference of 10% to the experimental results. The strain rate affects the strength of materials. In this case, it follows the power function, which means the higher the strain rate, the stronger the material.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2021-01-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/13345</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2021.53.1.3</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 53 No. 1 (2021); 210103</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2021.53.1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/13345/pdf_111</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>