Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Redesign of a Biomechanical Energy Regeneration-based Robotic Ankle Prosthesis using Indonesian Gait Data

Journal of Engineering and Technological Sciences · Vol. 53 No. 4 (2021)

DOI
10.5614/j.eng.technol.sci.2021.53.4.6
ISSN
2338-5502, 2337-5779
Terbit
2021-08-10
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

In this research, the robotic ankle design from Arizona State University (ASU) known as SPARKy was redesigned to accommodate the specific needs of Indonesian people. Most active prosthetic legs are designed based on gait parameters for people from Western countries, which may differ for people from other cultures that have a different anthropometry and economic background. Indonesians have smaller actuating power characteristics compared to people from Western cultures due to their smaller average weight and body height. Thus, the applied design strategy took advantage of a biomechanical energy regeneration scheme to reduce the actuator input power requirement and the relatively smaller mechanical power of the typical Indonesian ankle to create a potentially affordable robotic ankle with a smaller actuator that meets the technical specifications. The specifications of the powered prosthetic ankle were determined through the same methods used by SPARKy. Only one low-level control system, to actuate normal walking, was designed and tested on a fully assembled robotic ankle. The test results indicated a promising low-level control, where the robotic ankle can follow the predetermined trajectory required to actuate normal walking based on Indonesian gait data.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 83 tautan kepenulisan bersama · 19 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Institut National de Police Scientifique
  • Dr. Hasan Sadikin General Hospital
  • Padjadjaran University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tatacipta DirgantaraBandung Institute of Technology3
Satrio WicaksonoBandung Institute of Technology3
Hari GolfiantoBandung Institute of Technology2
Andhika DhaniswaraBandung Institute of Technology2
Sigit Puji SantosaBandung Institute of Technology1
Febrianto Guntur SunotoInstitut National de Police Scientifique1
Siska PrifiharniBandung Institute of Technology1
M. Rizka Faisal RahmanBandung Institute of Technology1
Hari UtomoBandung Institute of Technology1
Syarif HidayatBandung Institute of Technology1
Jam’ah HalidBandung Institute of Technology1
Mipi Ananta KusumaBandung Institute of Technology1
Reza Widianto SudjudDr. Hasan Sadikin General Hospital1
Ike Sri RejekiPadjadjaran University1
Sri RaharnoBandung Institute of Technology1
Dadang RukantaBandung Institute of Technology1
Hari TjahjonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Redesign of a Biomechanical Energy Regeneration-based Robotic Ankle Prosthesis using Indonesian Gait Data</dc:title>
	<dc:creator>Sutawika, Edgar Buwana</dc:creator>
	<dc:creator>Indrawanto, I.</dc:creator>
	<dc:creator>Ferryanto, F.</dc:creator>
	<dc:creator>Mihradi, Sandro</dc:creator>
	<dc:creator>Mahyuddin, Andi Isra</dc:creator>
	<dc:subject xml:lang="en-US">biomechanical</dc:subject>
	<dc:subject xml:lang="en-US"> energy regeneration</dc:subject>
	<dc:subject xml:lang="en-US">prosthesis</dc:subject>
	<dc:subject xml:lang="en-US"> robotic ankle</dc:subject>
	<dc:subject xml:lang="en-US">trajectory control</dc:subject>
	<dc:description xml:lang="en-US">In this research, the robotic ankle design from Arizona State University (ASU) known as SPARKy was redesigned to accommodate the specific needs of Indonesian people. Most active prosthetic legs are designed based on gait parameters for people from Western countries, which may differ for people from other cultures that have a different anthropometry and economic background. Indonesians have smaller actuating power characteristics compared to people from Western cultures due to their smaller average weight and body height. Thus, the applied design strategy took advantage of a biomechanical energy regeneration scheme to reduce the actuator input power requirement and the relatively smaller mechanical power of the typical Indonesian ankle to create a potentially affordable robotic ankle with a smaller actuator that meets the technical specifications. The specifications of the powered prosthetic ankle were determined through the same methods used by SPARKy. Only one low-level control system, to actuate normal walking, was designed and tested on a fully assembled robotic ankle. The test results indicated a promising low-level control, where the robotic ankle can follow the predetermined trajectory required to actuate normal walking based on Indonesian gait data.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2021-08-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/13691</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2021.53.4.6</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 53 No. 4 (2021); 210406</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/10.5614/j.eng.technol.sci.2021.53.4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/13691/5330</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>