Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Development of Laboratory-scale Lamb Wave-based Health Monitoring System for Laminated Composites

Journal of Engineering and Technological Sciences · Vol. 53 No. 4 (2021)

DOI
10.5614/j.eng.technol.sci.2021.53.4.7
ISSN
2338-5502, 2337-5779
Terbit
2021-08-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

This paper presents the development process of a laboratory-scale Lamb wave-based structural health monitoring (SHM) system for laminated composite plates. Piezoelectric patches are used in pairs as actuator/sensor to evaluate the time of flight (TOF), i.e. the time difference between the transmitted/received signals of a damaged plate and those of a healthy plate. The damage detection scheme is enabled by means of evaluating the TOF from at least three actuator/receiver pairs. In this work, experiments were performed on two GFRP plates, one healthy and the other one with artificial delamination. Nine piezoelectric transducers were mounted on each plate and the detection of the delamination location was demonstrated, using 4 pairs and 20 pairs of actuators/sensors. The combinations of fewer and more actuators/sensor pairs both provided a damage location that was in good agreement with the artificial damage location. The developed SHM system using simple and affordable equipment is suitable for supporting fundamental studies on damage detection, such as the development of an algorithm for location detection using the optimum number of actuator/sensor pairs.

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 82 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Padjadjaran University
  • Dr. Hasan Sadikin General Hospital
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sandro MihradiBandung Institute of Technology2
Afdhal AfdhalAfiliasi tidak diketahui2
Gantini SubrataPadjadjaran University1
Zulia HasratiningsihPadjadjaran University1
Erna KurnikasariPadjadjaran University1
Andi Isra MahyuddinBandung Institute of Technology1
Hari GolfiantoBandung Institute of Technology1
Satrio WicaksonoBandung Institute of Technology1
Nur Ridhwan MuharramBandung Institute of Technology1
Hermawan JudawisastraBandung Institute of Technology1
Hari UtomoBandung Institute of Technology1
Syarif HidayatBandung Institute of Technology1
Jam’ah HalidBandung Institute of Technology1
Mipi Ananta KusumaBandung Institute of Technology1
Reza Widianto SudjudDr. Hasan Sadikin General Hospital1
Ike Sri RejekiPadjadjaran University1
Sri RaharnoBandung Institute of Technology1
Dadang RukantaBandung Institute of Technology1
Hari TjahjonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of Laboratory-scale Lamb Wave-based Health Monitoring System for Laminated Composites</dc:title>
	<dc:creator>Gunawan, Leonardo</dc:creator>
	<dc:creator>Farrasamulya, Muhammad Hamzah</dc:creator>
	<dc:creator>Kuswoyo, Andi</dc:creator>
	<dc:creator>Dirgantara, Tatacipta</dc:creator>
	<dc:subject xml:lang="en-US">composite</dc:subject>
	<dc:subject xml:lang="en-US">damage introduction</dc:subject>
	<dc:subject xml:lang="en-US">Lamb wave</dc:subject>
	<dc:subject xml:lang="en-US">piezoelectric</dc:subject>
	<dc:subject xml:lang="en-US">SHM</dc:subject>
	<dc:subject xml:lang="en-US">Mechanical Engineering</dc:subject>
	<dc:description xml:lang="en-US">This paper presents the development process of a laboratory-scale Lamb wave-based structural health monitoring (SHM) system for laminated composite plates. Piezoelectric patches are used in pairs as actuator/sensor to evaluate the time of flight (TOF), i.e. the time difference between the transmitted/received signals of a damaged plate and those of a healthy plate. The damage detection scheme is enabled by means of evaluating the TOF from at least three actuator/receiver pairs. In this work, experiments were performed on two GFRP plates, one healthy and the other one with artificial delamination. Nine piezoelectric transducers were mounted on each plate and the detection of the delamination location was demonstrated, using 4 pairs and 20 pairs of actuators/sensors. The combinations of fewer and more actuators/sensor pairs both provided a damage location that was in good agreement with the artificial damage location. The developed SHM system using simple and affordable equipment is suitable for supporting fundamental studies on damage detection, such as the development of an algorithm for location detection using the optimum number of actuator/sensor pairs.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2021-08-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/14235</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2021.53.4.7</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 53 No. 4 (2021); 210407</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/10.5614/j.eng.technol.sci.2021.53.4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/14235/5384</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>