Melola Discovery

← Melola Discovery

Jurnal SINTA 1

A Finite Element Approach to Conduct Machinability Studies on Age-Hardened AA6061 Matrix Hybrid Composites

Journal of Engineering and Technological Sciences · Vol. 54 No. 2 (2022)

DOI
10.5614/j.eng.technol.sci.2022.54.2.8
ISSN
2338-5502, 2337-5779
Terbit
2022-03-25
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

AA6061, a popular structural material, has found widespread usage in the automotive and aerospace domains. The current work explored the effect of the improvement of mechanical properties on the machinability of AA6061 through finite element analysis. Three compositions of AA6061 containing 2 wt.% graphite and 0, 2, 4 wt.% granite dust were fabricated by stir casting. In the current work, a finite element model of a slab milling cutter with eight teeth was designed with high-speed steel (HSS) as the tool material. The LS-DYNA module of ANSYS was used for simulation of the milling operation, selecting two peripheral speeds for the cutter during the machining of the workpiece. Surface milling was carried out on the cast slabs of the three compositions to study chip formation. At higher cutting speeds, there was an increase in the von Mises stress as well as material deformation. An increase in the weight fraction of the ceramic fillers led to a corresponding increase in the von Mises stress and material deformation. The experimental results from face milling of the three compositions showed that the surface roughness increased with an increase in the content of ceramic fillers and a decrease in chip size.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 11 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Manipal Academy of Higher Education
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Pradyumna KodanchaManipal Academy of Higher Education2
Rajesh K BayarAfiliasi tidak diketahui2
Harishkumar KamatManipal Academy of Higher Education1
B. Satish ShenoyManipal Academy of Higher Education1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Finite Element Approach to Conduct Machinability Studies on Age-Hardened AA6061 Matrix Hybrid Composites</dc:title>
	<dc:creator>Pai, Anand</dc:creator>
	<dc:creator>Keni, Laxmikant</dc:creator>
	<dc:creator>Kini, Chandrakant R</dc:creator>
	<dc:subject xml:lang="en-US">age hardening</dc:subject>
	<dc:subject xml:lang="en-US">finite element method</dc:subject>
	<dc:subject xml:lang="en-US">hybrid aluminum matrix composites</dc:subject>
	<dc:subject xml:lang="en-US">machinability</dc:subject>
	<dc:subject xml:lang="en-US">tensile strength</dc:subject>
	<dc:subject xml:lang="en-US">Mechanical Engineering</dc:subject>
	<dc:description xml:lang="en-US">AA6061, a popular structural material, has found widespread usage in the automotive and aerospace domains. The current work explored the effect of the improvement of mechanical properties on the machinability of AA6061 through finite element analysis. Three compositions of AA6061 containing 2 wt.% graphite and 0, 2, 4 wt.% granite dust were fabricated by stir casting.  In the current work, a finite element model of a slab milling cutter with eight teeth was designed with high-speed steel (HSS) as the tool material. The LS-DYNA module of ANSYS was used for simulation of the milling operation, selecting two peripheral speeds for the cutter during the machining of the workpiece. Surface milling was carried out on the cast slabs of the three compositions to study chip formation. At higher cutting speeds, there was an increase in the von Mises stress as well as material deformation. An increase in the weight fraction of the ceramic fillers led to a corresponding increase in the von Mises stress and material deformation. The experimental results from face milling of the three compositions showed that the surface roughness increased with an increase in the content of ceramic fillers and a decrease in chip size.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2022-03-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/15674</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2022.54.2.8</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 54 No. 2 (2022); 220208</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2022.54.2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/15674/5691</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>