Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Experimental Work for Bar Straightness Effect Evaluation of Split Hopkinson Pressure Bar

Journal of Engineering and Technological Sciences · Vol. 53 No. 6 (2021)

DOI
10.5614/j.eng.technol.sci.2021.53.6.13
ISSN
2338-5502, 2337-5779
Terbit
2021-12-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Bar straightness is one of several factors that can affect the quality of the strain wave signal in a Split Hopkinson Pressure Bar (SHPB). Recently, it was found that the bar components of the SHPB at the Lightweight Structures Laboratory displayed a deviation in straightness because of manufacturing limitations. An evaluation was needed to determine whether the strain wave signals produced from this SHPB are acceptable or not. A numerical model was developed to investigate this effect. In this paper, experimental work was performed to evaluate the quality of the signal in the SHPB and to validate the numerical model. Good agreement between the experimental results and the numerical results was obtained for the strain rates and stress-strain relationship for mild steel ST37 and aluminum 6061 specimen materials. The recommended bar straightness tolerance is proposed as 0.36 mm per 100 mm.

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 82 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Padjadjaran University
  • Dr. Hasan Sadikin General Hospital
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sandro MihradiBandung Institute of Technology2
Muhammad Hamzah FarrasamulyaBandung Institute of Technology2
Andi KuswoyoBandung Institute of Technology2
Gantini SubrataPadjadjaran University1
Zulia HasratiningsihPadjadjaran University1
Erna KurnikasariPadjadjaran University1
Andi Isra MahyuddinBandung Institute of Technology1
Hari GolfiantoBandung Institute of Technology1
Satrio WicaksonoBandung Institute of Technology1
Nur Ridhwan MuharramBandung Institute of Technology1
Hermawan JudawisastraBandung Institute of Technology1
Hari UtomoBandung Institute of Technology1
Syarif HidayatBandung Institute of Technology1
Jam’ah HalidBandung Institute of Technology1
Mipi Ananta KusumaBandung Institute of Technology1
Reza Widianto SudjudDr. Hasan Sadikin General Hospital1
Ike Sri RejekiPadjadjaran University1
Sri RaharnoBandung Institute of Technology1
Dadang RukantaBandung Institute of Technology1
Hari TjahjonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Experimental Work for Bar Straightness Effect Evaluation of Split Hopkinson Pressure Bar</dc:title>
	<dc:creator>Afdhal, Afdhal</dc:creator>
	<dc:creator>Gunawan, Leonardo</dc:creator>
	<dc:creator>Dirgantara, Tatacipta</dc:creator>
	<dc:subject xml:lang="en-US">aluminum 6061</dc:subject>
	<dc:subject xml:lang="en-US">bar straightness</dc:subject>
	<dc:subject xml:lang="en-US">experimental work</dc:subject>
	<dc:subject xml:lang="en-US">mild steel</dc:subject>
	<dc:subject xml:lang="en-US">SHPB</dc:subject>
	<dc:subject xml:lang="en-US">Mechanical Engineering</dc:subject>
	<dc:description xml:lang="en-US">Bar straightness is one of several factors that can affect the quality of the strain wave signal in a Split Hopkinson Pressure Bar (SHPB). Recently, it was found that the bar components of the SHPB at the Lightweight Structures Laboratory displayed a deviation in straightness because of manufacturing limitations. An evaluation was needed to determine whether the strain wave signals produced from this SHPB are acceptable or not. A numerical model was developed to investigate this effect. In this paper, experimental work was performed to evaluate the quality of the signal in the SHPB and to validate the numerical model. Good agreement between the experimental results and the numerical results was obtained for the strain rates and stress-strain relationship for mild steel ST37 and aluminum 6061 specimen materials. The recommended bar straightness tolerance is proposed as 0.36 mm per 100 mm.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2021-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/16123</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2021.53.6.13</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 53 No. 6 (2021); 210613</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2021.53.6</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/16123/5587</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>