Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Comparison of Liquid Product Characteristics of PFAD Metal Soap Decarboxylation by Batch and Continuous Process

Journal of Engineering and Technological Sciences · Vol. 53 No. 3 (2021)

DOI
10.5614/j.eng.technol.sci.2021.53.3.11
ISSN
2338-5502, 2337-5779
Terbit
2021-07-12
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Well-run continuous processes will benefit the industrial world in the future. This paper investigated the effect of batch and continuous processes on metal basic soap decarboxylation in terms of the liquid product characteristics. The metal soap used in the process was made from palm fatty acid distillate (PFAD) reacted with mixed metal oxides of Zn, Mg, and Ca. While the batch decarboxylation was carried out in a batch reactor at 400 °C for 5 hours, the continuous decarboxylation was conducted at 400 °C with a feed flow rate of 3.75 gr/minutes. Theoretically, the yield of batch decarboxylation is 76.6 wt% while the yield of continuous decarboxylation is 73.37 wt%. The liquid product was fractionated to separate short-chain hydrocarbon of C7-C10 (gasoline fractions) from medium- to long-chain hydrocarbons, or greater than C11 (green diesel fraction). The result showed that the alkane content from the batch process was higher than from the continuous process, whereas the continuous process produced more ketone products compared to the batch process. Furthermore, the GC-FID analysis showed a similar amount of total hydrocarbon (alkane, iso-alkane, and alkene) in both the batch and the continuous process.

Kata kunci

Jaringan kolaborasi para penulis

27 penulis · 77 tautan kepenulisan bersama · 21 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Parahyangan Catholic University
  • Artha Wacana Christian University
  • Diponegoro University
  • Universitas Gadjah Mada
  • Korea Research Institute of Bioscience and Biotechnology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tirto PrakosoBandung Institute of Technology6
Subagjo SubagjoBandung Institute of Technology3
Vita WonoputriBandung Institute of Technology2
Tedi HudayaParahyangan Catholic University2
Johnner Parningotan SitompulBandung Institute of Technology2
Subiantoro SubiantoroBandung Institute of Technology1
Made Tri Ari Penia KresnowatiBandung Institute of Technology1
Jansen WijayaBandung Institute of Technology1
Joevin SaudalimkaBandung Institute of Technology1
Widayat WidayatDiponegoro University1
I Gusti Bagus Ngurah MakertiharthaBandung Institute of Technology1
Antonius IndartoBandung Institute of Technology1
Yano Surya PradanaUniversitas Gadjah Mada1
Alif Kembara AlamBandung Institute of Technology1
H. RahmanAfiliasi tidak diketahui1
R. MuhtadiBandung Institute of Technology1
H.W. LeeKorea Research Institute of Bioscience and Biotechnology1
Ongky WidjajaParahyangan Catholic University1
Antonius RionardiParahyangan Catholic University1
Michael GunawanParahyangan Catholic University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Comparison of Liquid Product Characteristics of PFAD Metal Soap Decarboxylation by Batch and Continuous Process</dc:title>
	<dc:creator>Neonufa, Godlief F.</dc:creator>
	<dc:creator>Elizabeth, Lidya</dc:creator>
	<dc:creator>Puspawiningtiyas, Endar</dc:creator>
	<dc:creator>Pratiwi, Meiti</dc:creator>
	<dc:creator>Istyami, Astri Nur</dc:creator>
	<dc:creator>Purwadi, Ronny</dc:creator>
	<dc:creator>Soerawidjaja, Tatang H.</dc:creator>
	<dc:subject xml:lang="en-US">batch decarboxylation</dc:subject>
	<dc:subject xml:lang="en-US">continuous decarboxylation</dc:subject>
	<dc:subject xml:lang="en-US">metal basic soap</dc:subject>
	<dc:subject xml:lang="en-US">green diesel</dc:subject>
	<dc:subject xml:lang="en-US"> bio-hydrocarbon</dc:subject>
	<dc:subject xml:lang="en-US">Chemical Engineering</dc:subject>
	<dc:description xml:lang="en-US">Well-run continuous processes will benefit the industrial world in the future. This paper investigated the effect of batch and continuous processes on metal basic soap decarboxylation in terms of the liquid product characteristics. The metal soap used in the process was made from palm fatty acid distillate (PFAD) reacted with mixed metal oxides of Zn, Mg, and Ca. While the batch decarboxylation was carried out in a batch reactor at 400 °C for 5 hours, the continuous decarboxylation was conducted at 400 °C with a feed flow rate of 3.75 gr/minutes. Theoretically, the yield of batch decarboxylation is 76.6 wt% while the yield of continuous decarboxylation is 73.37 wt%. The liquid product was fractionated to separate short-chain hydrocarbon of C7-C10 (gasoline fractions) from medium- to long-chain hydrocarbons, or greater than C11 (green diesel fraction). The result showed that the alkane content from the batch process was higher than from the continuous process, whereas the continuous process produced more ketone products compared to the batch process. Furthermore, the GC-FID analysis showed a similar amount of total hydrocarbon (alkane, iso-alkane, and alkene) in both the batch and the continuous process.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2021-07-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/16409</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2021.53.3.11</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 53 No. 3 (2021); 210311</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/10.5614/j.eng.technol.sci.2021.53.3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/16409/5301</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>