Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Strength Enhancement, Ductility, and Confinement Effectiveness Index of Fly Ash-based Geopolymer Concrete Square Columns

Journal of Engineering and Technological Sciences · Vol. 54 No. 4 (2022)

DOI
10.5614/j.eng.technol.sci.2022.54.4.11
ISSN
2338-5502, 2337-5779
Terbit
2022-07-18
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Geopolymer concrete is an environmentally friendly construction material that has the potential to be applied in building structures. It is important to understand the structural behavior of geopolymer concrete. This paper presents an experimental investigation into the performance of structural elements of geopolymer concrete under concentric axial loads. The specimens were twelve square columns with a size of 170 x 170 mm and a height of 480 mm. The study variables were the tie spacing and the compressive strength of unconfined geopolymer concrete (f’c). The test results showed that the increase in f'cc was not as significant as the increase in unconfined concrete compressive strength (f'c). The value of strength enhancement (K) tended to decrease. The column ductility (m) and confinement effectiveness index (Ic) had optimum values. The effect of increasing the tie spacing (s) decreased the K, Ic, and m values of the column. The proposed f’cc formulation for geopolymer concrete is compatible.

Kata kunci

Jaringan kolaborasi para penulis

32 penulis · 77 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Andalas University
  • Maranatha Christian University
  • Sultan Agung Islamic University
  • University of Nusa Cendana
  • Politeknik Negeri Bandung
  • Ministry of Public Works, Republic of Indonesia
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Siti Aisyah NurjannahBandung Institute of Technology4
Ivindra PaneBandung Institute of Technology3
Made SuarjanaBandung Institute of Technology3
Muslinang MoestopoBandung Institute of Technology2
Riawan GunadiPoliteknik Negeri Bandung2
Ananta SofwanBandung Institute of Technology2
Saptahari SugiriBandung Institute of Technology2
Indra Djati SidiBandung Institute of Technology2
Herlien Dwiarti SetioBandung Institute of Technology2
Yurisman YurismanBandung Institute of Technology1
Anang KristiantoMaranatha Christian University1
Antonius AntoniusSultan Agung Islamic University1
Bambang SunendarBandung Institute of Technology1
Partogi Hasudungan SimatupangUniversity of Nusa Cendana1
Awal SuronoBandung Institute of Technology1
Ruddy KurniawanAndalas University1
Masyhur IrsyamBandung Institute of Technology1
Muhammad AsrurifakBandung Institute of Technology1
Delfebriyadi DelfebriyadiAndalas University1
Bigman Marihat HutapeaBandung Institute of Technology1
Yudi HerdiansahBandung Institute of Technology1
Herlien Dwiarti SoemariBandung Institute of Technology1
Patria KusumaningrumBandung Institute of Technology1
Diah Puspita RahmiBandung Institute of Technology1
Erwin LimBandung Institute of Technology1
Ahmed Najm AbdullahBandung Institute of Technology1
Veby Citra SimanjuntakMinistry of Public Works, Republic of Indonesia1
Widi NugrahaMinisterio de Transportes, Movilidad y Agenda Urbana1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Strength Enhancement, Ductility, and Confinement Effectiveness Index of Fly Ash-based Geopolymer Concrete Square Columns </dc:title>
	<dc:creator>Herwani, Herwani</dc:creator>
	<dc:creator>Imran, Iswandi</dc:creator>
	<dc:creator>Budiono, Bambang</dc:creator>
	<dc:creator>Zulkifli, Ediansjah</dc:creator>
	<dc:subject xml:lang="en-US">compressive strength</dc:subject>
	<dc:subject xml:lang="en-US">fly ash</dc:subject>
	<dc:subject xml:lang="en-US">geopolymer concrete</dc:subject>
	<dc:subject xml:lang="en-US">square column</dc:subject>
	<dc:subject xml:lang="en-US">tie spacing</dc:subject>
	<dc:subject xml:lang="en-US">Civil Engineering</dc:subject>
	<dc:description xml:lang="en-US">Geopolymer concrete is an environmentally friendly construction material that has the potential to be applied in building structures. It is important to understand the structural behavior of geopolymer concrete. This paper presents an experimental investigation into the performance of structural elements of geopolymer concrete under concentric axial loads. The specimens were twelve square columns with a size of 170 x 170 mm and a height of 480 mm. The study variables were the tie spacing and the compressive strength of unconfined geopolymer concrete (f’c). The test results showed that the increase in f'cc was not as significant as the increase in unconfined concrete compressive strength (f'c). The value of strength enhancement (K) tended to decrease. The column ductility (m) and confinement effectiveness index (Ic) had optimum values. The effect of increasing the tie spacing (s) decreased the K, Ic, and m values of the column. The proposed f’cc formulation for geopolymer concrete is compatible.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2022-07-18</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/16411</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2022.54.4.11</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 54 No. 4 (2022); 220411</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2022.54.4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/16411/5866</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>