Jurnal
SINTA 1
Effect of Dissolution Temperature on Purity of LaNi5 Powder Synthesized with the Combustion-Reduction Method
Journal of Engineering and Technological Sciences · Vol. 53 No. 5 (2021)
ISSN 2338-5502, 2337-5779
Terbit 2021-11-18
Penerbit Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa eng
Abstrak
The LaNi5 intermetallic phase has been extensively investigated because of its excellent properties, such as attractive hydrogen storage, medium plateau pressure, and easy activation. LaNi5 phase is generally produced by a complicated method, which involves several steps, i.e. melting, alloying, casting, softening and making them into powder. This study aimed to develop a new LaNi5 synthesis process by modifying the combustion-reduction method. In this method it is very important to produce La2NiO4, because LaNi5 is formed from the process of reducing this phase. The precursor powders La(NO3)3.6H2O and Ni(NO3)2.6H2O were reacted with distilled water as a solvent medium and mixed using magnetic stirring. The synthesis process was carried out at room temperature, 60 °C, 70 °C, and 80 °C for 10 minutes until the solution became transparent green. The solution was then dried for 2 hours at 100 °C to form a transparent green gel. The gel was calcined at a temperature of 500 °C for 2 hours, producing a black powder. The optimal black powder was then reduced using CO gas at 600 °C for 2 hours. The powder samples were characterized using XRD, FTIR, and SEM-EDX. The analysis revealed that synthesis at room temperature was the most optimal method for the reduction process because it produced the most La2NiO4, at 12.135 wt%.
Jaringan kolaborasi para penulis
22 penulis ·
54 tautan kepenulisan bersama
· 14 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Indonesian Institute of Sciences Indonesia University of Education Mercu Buana University Tun Hussein Onn University of Malaysia University of Technology Malaysia National Research and Innovation Agency Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Effect of Dissolution Temperature on Purity of LaNi5 Powder Synthesized with the Combustion-Reduction Method</dc:title>
<dc:creator>Hapsari, Ade Utami</dc:creator>
<dc:creator>Pravitasari, Retna Deca</dc:creator>
<dc:creator>Yuliani, Hanif</dc:creator>
<dc:creator>Damisih, Damisih</dc:creator>
<dc:creator>Khaerudini, Deni Shidqi</dc:creator>
<dc:creator>Saudi, Aghni Ulma</dc:creator>
<dc:creator>Raharjo, Jarot</dc:creator>
<dc:subject xml:lang="en-US">characterization</dc:subject>
<dc:subject xml:lang="en-US">combustion-reduction</dc:subject>
<dc:subject xml:lang="en-US">dilanthanum nickel oxide (La2NiO4)</dc:subject>
<dc:subject xml:lang="en-US">lanthanum pentanickel (LaNi5)</dc:subject>
<dc:subject xml:lang="en-US">synthesis temperature</dc:subject>
<dc:subject xml:lang="en-US">Materials Engineering</dc:subject>
<dc:description xml:lang="en-US">The LaNi5 intermetallic phase has been extensively investigated because of its excellent properties, such as attractive hydrogen storage, medium plateau pressure, and easy activation. LaNi5 phase is generally produced by a complicated method, which involves several steps, i.e. melting, alloying, casting, softening and making them into powder. This study aimed to develop a new LaNi5 synthesis process by modifying the combustion-reduction method. In this method it is very important to produce La2NiO4, because LaNi5 is formed from the process of reducing this phase. The precursor powders La(NO3)3.6H2O and Ni(NO3)2.6H2O were reacted with distilled water as a solvent medium and mixed using magnetic stirring. The synthesis process was carried out at room temperature, 60 °C, 70 °C, and 80 °C for 10 minutes until the solution became transparent green. The solution was then dried for 2 hours at 100 °C to form a transparent green gel. The gel was calcined at a temperature of 500 °C for 2 hours, producing a black powder. The optimal black powder was then reduced using CO gas at 600 °C for 2 hours. The powder samples were characterized using XRD, FTIR, and SEM-EDX. The analysis revealed that synthesis at room temperature was the most optimal method for the reduction process because it produced the most La2NiO4, at 12.135 wt%.</dc:description>
<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
<dc:date>2021-11-18</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/16894</dc:identifier>
<dc:identifier>10.5614/j.eng.technol.sci.2021.53.5.12</dc:identifier>
<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 53 No. 5 (2021); 210512</dc:source>
<dc:source>2338-5502</dc:source>
<dc:source>2337-5779</dc:source>
<dc:source>10.5614/10.5614/j.eng.technol.sci.2021.53.5</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/16894/5460</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2021 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat DOI
1 sitasi
Crossref
Belum diperiksa
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Hapsari, A. U., Pravitasari, R. D., Yuliani, H., Damisih, D., Khaerudini, D. S., Saudi, A. U., & Raharjo, J. (2021). Effect of Dissolution Temperature on Purity of LaNi5 Powder Synthesized with the Combustion-Reduction Method. Journal of Engineering and Technological Sciences, 53(5). https://doi.org/10.5614/j.eng.technol.sci.2021.53.5.12
Salin
IEEE
A. U. Hapsari, R. D. Pravitasari, H. Yuliani, D. Damisih, D. S. Khaerudini, A. U. Saudi, and J. Raharjo, “Effect of Dissolution Temperature on Purity of LaNi5 Powder Synthesized with the Combustion-Reduction Method,” Journal of Engineering and Technological Sciences, vol. 53, no. 5, 2021, doi: 10.5614/j.eng.technol.sci.2021.53.5.12.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.