Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effect of Filter Media Size and Loading Rate to Filter Performance of Removing Microplastics using Rapid Sand Filter

Journal of Engineering and Technological Sciences · Vol. 54 No. 5 (2022)

DOI
10.5614/j.eng.technol.sci.2022.54.5.12
ISSN
2338-5502, 2337-5779
Terbit
2022-09-15
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Microplastics (MP) can pose a serious threat to the environment and human health because of their tiny size and ability to spread easily in water. One of the alternative treatments to remove MP from water is the rapid sand filter (RSF). The objective of this study was to analyze the effects of filter media size and loading rate on RSF performance in removing MP. The applied filter media was silica sand with effective sizes (ES) of 0.39 and 0.68 mm. The loading rates of filtration were 4; 6; 8 and 10 m3/m2-h. The MP samples were made from plastic bags and torn tires (artificial samples: 10 to 800 µm). This study showed that the MP removal percentage was up to 96.6% (MP size larger than 200 µm). The head loss increment for loading rates 4; 6; 8; 10 m3/m2-h was 0.16; 0.35; 0.34; 0.25 m (ES 0.39 m) and 0.10; 0.18; 0.18; 0.19 m (ES 0.68 m)), respectively. Meanwhile, the filtration cycle for loading rates 4; 6; 8; and 10 m3/m2-h was 5, 2, 2, and 1 days (ES 0.39 mm) and 9, 4, 3, and 3 days (ES 0.68 mm), respectively. The result of this study showed that the smaller the filter media size, the higher the head loss of the filter media bed. Furthermore, there is an increased head loss of the filter media bed when the loading rate is greater.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 43 tautan kepenulisan bersama · 6 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Sumatera Institute of Technology
  • Ministry of Industry of the Republic of Indonesia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mindriany SyafilaBandung Institute of Technology4
Ibtisani FarahnazBandung Institute of Technology1
Muhammad Sonny AbfertiawanBandung Institute of Technology1
Adearty PrayascitraBandung Institute of Technology1
Edwan KardenaBandung Institute of Technology1
Suprihanto NotodarmojoBandung Institute of Technology1
Doni SugiyanaMinistry of Industry of the Republic of Indonesia1
Amanda LarasatiBandung Institute of Technology1
Prayatni SoewondoBandung Institute of Technology1
Herto Dwi AriesyadyBandung Institute of Technology1
Andik YuliantoBandung Institute of Technology1
Nida Maisa ZakiyyaBandung Institute of Technology1
Andri GumilarBandung Institute of Technology1
Muh. Ilham AnggamuliaBandung Institute of Technology1
Syarif HidayatBandung Institute of Technology1
Asis H. DjajadiningratBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Filter Media Size and Loading Rate to Filter Performance of Removing Microplastics using Rapid Sand Filter</dc:title>
	<dc:creator>Fajar, Mutiara</dc:creator>
	<dc:creator>Sembiring, Emenda</dc:creator>
	<dc:creator>Handajani, Marisa</dc:creator>
	<dc:subject xml:lang="en-US">effective size</dc:subject>
	<dc:subject xml:lang="en-US">filtration cycle</dc:subject>
	<dc:subject xml:lang="en-US">head loss</dc:subject>
	<dc:subject xml:lang="en-US">loading rate</dc:subject>
	<dc:subject xml:lang="en-US">microplastics removal</dc:subject>
	<dc:subject xml:lang="en-US">rapid sand filter</dc:subject>
	<dc:subject xml:lang="en-US">Environmental Engineering</dc:subject>
	<dc:description xml:lang="en-US">Microplastics (MP) can pose a serious threat to the environment and human health because of their tiny size and ability to spread easily in water. One of the alternative treatments to remove MP from water is the rapid sand filter (RSF). The objective of this study was to analyze the effects of filter media size and loading rate on RSF performance in removing MP. The applied filter media was silica sand with effective sizes (ES) of 0.39 and 0.68 mm. The loading rates of filtration were 4; 6; 8 and 10 m3/m2-h. The MP samples were made from plastic bags and torn tires (artificial samples: 10 to 800 µm). This study showed that the MP removal percentage was up to 96.6% (MP size larger than 200 µm). The head loss increment for loading rates 4; 6; 8; 10 m3/m2-h was 0.16; 0.35; 0.34; 0.25 m (ES 0.39 m) and 0.10; 0.18; 0.18; 0.19 m (ES 0.68 m)), respectively. Meanwhile, the filtration cycle for loading rates 4; 6; 8; and 10 m3/m2-h was 5, 2, 2, and 1 days (ES 0.39 mm) and 9, 4, 3, and 3 days (ES 0.68 mm), respectively. The result of this study showed that the smaller the filter media size, the higher the head loss of the filter media bed. Furthermore, there is an increased head loss of the filter media bed when the loading rate is greater.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2022-09-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/16912</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2022.54.5.12</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 54 No. 5 (2022); 220512</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2022.54.5</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/16912/5959</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>