Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Physical and Chemical Properties of Indonesian Coffee Beans for Different Postharvest Processing Methods

Journal of Engineering and Technological Sciences · Vol. 55 No. 1 (2023) · hlm. 1–11

DOI
10.5614/j.eng.technol.sci.2023.55.1.1
ISSN
2338-5502, 2337-5779
Terbit
2023-03-06
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

The purpose of this study was to identify the physical and chemical properties of Indonesian coffee beans for different postharvesting methods after being roasted. Several types of Indonesian export coffee, i.e., Gayo Luwak coffee, Wamena coffee, Toraja coffee, Gayo coffee, Flores coffee and Kintamani coffee, were used in the present study. Each coffee has its own aroma and taste according to the location, soil type, and land elevation. The roasting process started with preheating the roasting machine, after which the samples were roasted for about 15 minutes at 215℃ to obtain the medium-to-dark (MTD) roasting level. The physical properties measured included density, mass loss, porosity, water content, and morphology using a scanning electron microscope. The transmittance spectrum was observed by Fourier transform infrared spectroscopy (FTIR). The physical properties of the coffee were successfully measured. The bulk density varied from 0.6 to 0.7 g/cm3, and particle density was about 0.9 g/cm3 for green beans. The roasting process reduced the bulk and particle density to 0.3 g/cm3 on average and 0.8 g/cm3, respectively. The fully-washed condition gave an overlapping spectrum for green and roasted beans, which shows that the roasting process did not affect the spectrum. The results can be used to study the coffee quality resulting from different postharvest processing methods.

Kata kunci

Jaringan kolaborasi para penulis

31 penulis · 95 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Syiah Kuala
  • Griffith University
  • Institut Teknologi Sepuluh Nopember
  • Prince of Songkla University
  • Samudra University
  • Universiti Sains Malaysia
  • Sekolah Tinggi Teknologi Pekanbaru
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Lena ArdiahUniversitas Syiah Kuala4
Zulkarnain JalilUniversitas Syiah Kuala2
Nazli IsmailUniversitas Syiah Kuala2
Umar MuksinUniversitas Syiah Kuala2
Muhammad IsaUniversitas Syiah Kuala2
Dwiky Pobri CesarianUniversitas Syiah Kuala2
Ismail Ahmad AbirUniversiti Sains Malaysia2
Fredy KurniawanInstitut Teknologi Sepuluh Nopember1
Nurjannah NurjannahAfiliasi tidak diketahui1
Syarifah ZainuraUniversitas Syiah Kuala1
Edwar IswardyUniversitas Syiah Kuala1
Malahayati MalahayatiUniversitas Syiah Kuala1
Fauzi FauziUniversitas Syiah Kuala1
Muhammad Nizar MachmudUniversitas Syiah Kuala1
Fajrul HaniUniversitas Syiah Kuala1
Fadhli SyamsuddinUniversitas Syiah Kuala1
Amir AsyqariUniversitas Syiah Kuala1
Muhammad NandaUniversitas Syiah Kuala1
Badrul MunirUniversitas Syiah Kuala1
Muhammad Arfan AlhafsiUniversitas Syiah Kuala1
Tomi AfrizalPrince of Songkla University1
Nirmala SariSamudra University1
Suandi DaulaySekolah Tinggi Teknologi Pekanbaru1
Muhammad YanisUniversitas Syiah Kuala1
Lucki ArmandaUniversitas Syiah Kuala1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Physical and Chemical Properties of Indonesian Coffee Beans for Different Postharvest Processing Methods</dc:title>
	<dc:creator>Yusibani, Elin</dc:creator>
	<dc:creator>Woodfield, Peter Lloyd</dc:creator>
	<dc:creator>Rahwanto, Adi</dc:creator>
	<dc:creator>Surbakti, Muhammad Syukri</dc:creator>
	<dc:creator>Rajibussalim, Rajibussalim</dc:creator>
	<dc:creator>Rahmi, Rahmi</dc:creator>
	<dc:subject xml:lang="en-US">coffee</dc:subject>
	<dc:subject xml:lang="en-US">Flores</dc:subject>
	<dc:subject xml:lang="en-US">roasted</dc:subject>
	<dc:subject xml:lang="en-US">Gayo Luwak</dc:subject>
	<dc:subject xml:lang="en-US">Gayo</dc:subject>
	<dc:subject xml:lang="en-US">Kintamani</dc:subject>
	<dc:subject xml:lang="en-US">Toraja</dc:subject>
	<dc:subject xml:lang="en-US">Wamena</dc:subject>
	<dc:subject xml:lang="en-US">Food Engineering</dc:subject>
	<dc:description xml:lang="en-US">The purpose of this study was to identify the physical and chemical properties of Indonesian coffee beans for different postharvesting methods after being roasted. Several types of Indonesian export coffee, i.e., Gayo Luwak coffee, Wamena coffee, Toraja coffee, Gayo coffee, Flores coffee and Kintamani coffee, were used in the present study. Each coffee has its own aroma and taste according to the location, soil type, and land elevation. The roasting process started with preheating the roasting machine, after which the samples were roasted for about 15 minutes at 215℃ to obtain the medium-to-dark (MTD) roasting level. The physical properties measured included density, mass loss, porosity, water content, and morphology using a scanning electron microscope. The transmittance spectrum was observed by Fourier transform infrared spectroscopy (FTIR). The physical properties of the coffee were successfully measured. The bulk density varied from 0.6 to 0.7 g/cm3, and particle density was about 0.9 g/cm3 for green beans. The roasting process reduced the bulk and particle density to 0.3 g/cm3 on average and 0.8 g/cm3, respectively. The fully-washed condition gave an overlapping spectrum for green and roasted beans, which shows that the roasting process did not affect the spectrum. The results can be used to study the coffee quality resulting from different postharvest processing methods.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2023-03-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/18279</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2023.55.1.1</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 55 No. 1 (2023); 1-11</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2023.55.1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/18279/6114</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>