Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Development of Non-Intrusive Load Monitoring of Electricity Load Classification with Low-Frequency Sampling Based on Support Vector Machine

Journal of Engineering and Technological Sciences · Vol. 55 No. 2 (2023) · hlm. 109–119

DOI
10.5614/j.eng.technol.sci.2023.55.2.1
ISSN
2338-5502, 2337-5779
Terbit
2023-05-12
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Non-intrusive load monitoring (NILM) is a promising approach to provide energy consumption monitoring of electrical appliances and analysis of current and voltage data with less instrumentation. This paper proposes an electrical load classification model using support vector machine (SVM). SVM was chosen to keep the computational cost low and be able to implement an embedded system. The SVM model was utilized to classify the on/off state of air conditioners, light bulbs, other uncategorized electronics, and their combinations. It utilizes low-frequency sampling data captured every minute, or at a 0.0167 Hz rate. Utilization change in active and reactive power was used as a feature in the model training. The optimal kernel for the model was the radial basis function (RBF) kernel with C and gamma values of 88.587 and 2.336 as hyperparameters, producing a highly accurate model. In testing with real-time conditions, the model classified the on/off state of the electrical loads with 0.93 precision, 0.91 recall, and 0.91 f-score. The results of testing proved that the model can be applied in real time with high accuracy and with an acceptable performance in field implementation using an embedded system.

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 89 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Telkom University
  • Sumatera Institute of Technology
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
F.X. Nugroho SoelamiBandung Institute of Technology5
M Daya ImannataBandung Institute of Technology4
Timothius Pratama TjahjaBandung Institute of Technology4
Meditya WasesaBandung Institute of Technology4
FX Nugroho SoelamiBandung Institute of Technology4
Muhamad Riezar Satria ShebaBandung Institute of Technology3
Alief Widjoseno Damar PersadaBandung Institute of Technology3
Koko FriansaSumatera Institute of Technology3
Hanafi KusumayudhaBandung Institute of Technology3
Salsabila RegitaBandung Institute of Technology3
Mediya WasesaBandung Institute of Technology3
Yohannes S. M. SimamoraBandung Institute of Technology2
Harijono A. TjokronegoroBandung Institute of Technology2
Brian YuliartoBandung Institute of Technology2
Deddy KurniadiBandung Institute of Technology2
Ahmad QurthobiTelkom University1
Anggita Bayu Krisna PambudiTelkom University1
Dudi DarmawanTelkom University1
Irsan Soemantri BrodjonegoroBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of Non-Intrusive Load Monitoring of Electricity Load Classification with Low-Frequency Sampling Based on Support Vector Machine</dc:title>
	<dc:creator>Leksono, Edi</dc:creator>
	<dc:creator>Mandhany, Auditio</dc:creator>
	<dc:creator>Nashirul Haq, Irsyad</dc:creator>
	<dc:creator>Pradipta, Justin</dc:creator>
	<dc:creator>Handre Kertha Utama, Putu</dc:creator>
	<dc:creator>Fauzi Iskandar, Reza</dc:creator>
	<dc:creator>Mahesa Nanda, Rezky</dc:creator>
	<dc:subject xml:lang="en-US">Non-Intrusive Load Monitoring</dc:subject>
	<dc:subject xml:lang="en-US">Support Vector Machine</dc:subject>
	<dc:subject xml:lang="en-US">Low Frequency Sampling</dc:subject>
	<dc:subject xml:lang="en-US">Energy Monitoring</dc:subject>
	<dc:subject xml:lang="en-US">Load Classification</dc:subject>
	<dc:subject xml:lang="en-US">Engineering Physics</dc:subject>
	<dc:subject xml:lang="en-US">Electrical Engineering</dc:subject>
	<dc:subject xml:lang="en-US">Energy Management</dc:subject>
	<dc:description xml:lang="en-US">Non-intrusive load monitoring (NILM) is a promising approach to provide energy consumption monitoring of electrical appliances and analysis of current and voltage data with less instrumentation. This paper proposes an electrical load classification model using support vector machine (SVM). SVM was chosen to keep the computational cost low and be able to implement an embedded system. The SVM model was utilized to classify the on/off state of air conditioners, light bulbs, other uncategorized electronics, and their combinations. It utilizes low-frequency sampling data captured every minute, or at a 0.0167 Hz rate. Utilization change in active and reactive power was used as a feature in the model training. The optimal kernel for the model was the radial basis function (RBF) kernel with C and gamma values of 88.587 and 2.336 as hyperparameters, producing a highly accurate model. In testing with real-time conditions, the model classified the on/off state of the electrical loads with 0.93 precision, 0.91 recall, and 0.91 f-score. The results of testing proved that the model can be applied in real time with high accuracy and with an acceptable performance in field implementation using an embedded system.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2023-05-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/20166</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2023.55.2.1</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 55 No. 2 (2023); 109-119</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2023.55.2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/20166/6200</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>