Melola Discovery

← Melola Discovery

Jurnal SINTA 1

A Comparative Study of Solid-State and Co-precipitation Methods for Synthesis of NMC622 Cathode Material from Spent Nickel Catalyst

Journal of Engineering and Technological Sciences · Vol. 55 No. 5 (2023) · hlm. 548–557

DOI
10.5614/j.eng.technol.sci.2023.55.5.4
ISSN
2338-5502, 2337-5779
Terbit
2023-12-22
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

Nickel, the main raw material for lithium-ion batteries (LIB), is currently the most in-demand metal. The rising need for nickel and current environmental concerns have underscored the importance of recycling waste metal to recover its value. Meanwhile, a significant secondary source with a high metal value is spent catalyst. In this context, the acid leaching method was used to recover nickel from spent catalyst. This study aimed to synthesize Lithium Nickel Manganese Cobalt Oxide 622 (NMC622) from spent catalyst. To determine the optimal method, a comparative analysis was conducted between solid-state and co-precipitation methods. Recycled spent nickel catalyst to be used for cathode material was examined by analytical methods, i.e., XRD, FTIR, SEM-EDX, and electrochemical performance testing. The XRD, FTIR, and SEM-EDX tests produced similar outcomes, consistent with previous reports. However, in the electrochemical test, the co-precipitation method showed a specific capacity two times higher than the solid-state method. The NMC622 from the co-precipitation method (NMC622-CP) yielded a specific discharge capacity of 132.82 mAh.g-1 at 0.1C, while the retention capacity was 70% for 50 cycles at 0.5C.

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 42 tautan kepenulisan bersama · 6 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Universitas Pembangunan Nasional Veteran Yogyakarta
  • Lappeenranta-Lahti University of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Anif JamaluddinSebelas Maret University2
Anafi Nur’ainiLappeenranta-Lahti University of Technology2
Merreta Noorenza BiuttyUniversitas Pembangunan Nasional Veteran Yogyakarta1
Marcelinus Dinho SiahaanUniversitas Pembangunan Nasional Veteran Yogyakarta1
Fariz A’la NurrahmanUniversitas Pembangunan Nasional Veteran Yogyakarta1
Anggia Putri GustamiAfiliasi tidak diketahui1
Witri Wahyu LestariSebelas Maret University1
Fitria RahmawatiSebelas Maret University1
Viona NataliaSebelas Maret University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Comparative Study of Solid-State and Co-precipitation Methods for Synthesis of NMC622 Cathode Material from Spent Nickel Catalyst</dc:title>
	<dc:creator>Dyartanti, Endah Retno</dc:creator>
	<dc:creator>Paramitha, Tika</dc:creator>
	<dc:creator>Jumari, Arif</dc:creator>
	<dc:creator>Purwanto, Agus</dc:creator>
	<dc:creator>Nur, Adrian</dc:creator>
	<dc:creator>Budiman, Anatta Wahyu</dc:creator>
	<dc:creator>Nisa, Shofirul Sholikhatun</dc:creator>
	<dc:subject xml:lang="en-US">cathode material</dc:subject>
	<dc:subject xml:lang="en-US">co-precipitation method</dc:subject>
	<dc:subject xml:lang="en-US">leaching</dc:subject>
	<dc:subject xml:lang="en-US">NMC</dc:subject>
	<dc:subject xml:lang="en-US">recycle</dc:subject>
	<dc:subject xml:lang="en-US">solid-state method</dc:subject>
	<dc:subject xml:lang="en-US">spent catalyst</dc:subject>
	<dc:subject xml:lang="en-US">Material Science</dc:subject>
	<dc:subject xml:lang="en-US">Energy Storage</dc:subject>
	<dc:description xml:lang="en-US">Nickel, the main raw material for lithium-ion batteries (LIB), is currently the most in-demand metal. The rising need for nickel and current environmental concerns have underscored the importance of recycling waste metal to recover its value. Meanwhile, a significant secondary source with a high metal value is spent catalyst. In this context, the acid leaching method was used to recover nickel from spent catalyst. This study aimed to synthesize Lithium Nickel Manganese Cobalt Oxide 622 (NMC622) from spent catalyst. To determine the optimal method, a comparative analysis was conducted between solid-state and co-precipitation methods. Recycled spent nickel catalyst to be used for cathode material was examined by analytical methods, i.e., XRD, FTIR, SEM-EDX, and electrochemical performance testing. The XRD, FTIR, and SEM-EDX tests produced similar outcomes, consistent with previous reports. However, in the electrochemical test, the co-precipitation method showed a specific capacity two times higher than the solid-state method. The NMC622 from the co-precipitation method (NMC622-CP) yielded a specific discharge capacity of 132.82 mAh.g-1 at 0.1C, while the retention capacity was 70% for 50 cycles at 0.5C.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2023-12-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/20436</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2023.55.5.4</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 55 No. 5 (2023); 548-557</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2023.55.5</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/20436/6433</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>