Jurnal
SINTA 1
The Risk of Failure Assessment in Bina Marga Standard Designed Prestressed Concrete Girder Bridges under B-WIM Load Measurement
Journal of Engineering and Technological Sciences · Vol. 55 No. 5 (2023) · hlm. 558–568
ISSN 2338-5502, 2337-5779
Terbit 2023-12-22
Penerbit Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa eng
Abstrak
The use of precast prestressed concrete girder bridges in Indonesia has been increasing rapidly due to their high quality, reliability, and faster construction on site. The girder components are typically designed for a specific bridge span and can be prefabricated. The Directorate General of Highways of the Ministry of PUPR (Bina Marga) has released a standard design for prestressed concrete girder bridges with a typical span of up to 40 m. This design is based on the bridge loading standard SNI 1725 2016, which determines the live traffic load through consensus due to limited data on actual traffic load measurement results. However, the Ministry of PUPR has been implementing actual traffic load measurements using weigh-in-motion (WIM) technology to directly measure the load of passing vehicles. In this study, a risk assessment of the failure risk of a standard Bina Marga bridge with a 40-m span prestressed concrete girder type was conducted based on B-WIM load measurements. The results of this assessment indicate that the standard Bina Marga bridge has a failure risk of 1.48 x 10-4, which is smaller than the acceptable risk of failure according to the AASHTO LRFD Bridge Design Specification as referenced in SNI 1725 2016.
Jaringan kolaborasi para penulis
19 penulis ·
40 tautan kepenulisan bersama
· 9 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Bandung Institute of Technology Ministerio de Transportes, Movilidad y Agenda Urbana Maranatha Christian University Institut Teknologi Sepuluh Nopember Direktorat Jenderal Bina Marga
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">The Risk of Failure Assessment in Bina Marga Standard Designed Prestressed Concrete Girder Bridges under B-WIM Load Measurement</dc:title>
<dc:creator>Nugraha, Widi</dc:creator>
<dc:creator>Sidi, Indra Djati</dc:creator>
<dc:creator>Suarjana, Made</dc:creator>
<dc:creator>Zulkifli, Ediansjah</dc:creator>
<dc:subject xml:lang="en-US">B-WIM</dc:subject>
<dc:subject xml:lang="en-US">failure risk assessment</dc:subject>
<dc:subject xml:lang="en-US">live traffic load</dc:subject>
<dc:subject xml:lang="en-US">precast prestressed concrete girder bridges</dc:subject>
<dc:subject xml:lang="en-US">reliability</dc:subject>
<dc:subject xml:lang="en-US">Civil Engineering</dc:subject>
<dc:subject xml:lang="en-US">Structural Engineering</dc:subject>
<dc:subject xml:lang="en-US">Reliability of Structure</dc:subject>
<dc:subject xml:lang="en-US">Bridge Structure</dc:subject>
<dc:subject xml:lang="en-US">Traffic Loading</dc:subject>
<dc:subject xml:lang="en-US">Weigh-in-motion</dc:subject>
<dc:subject xml:lang="en-US">Risk of failure assessment</dc:subject>
<dc:description xml:lang="en-US">The use of precast prestressed concrete girder bridges in Indonesia has been increasing rapidly due to their high quality, reliability, and faster construction on site. The girder components are typically designed for a specific bridge span and can be prefabricated. The Directorate General of Highways of the Ministry of PUPR (Bina Marga) has released a standard design for prestressed concrete girder bridges with a typical span of up to 40 m. This design is based on the bridge loading standard SNI 1725 2016, which determines the live traffic load through consensus due to limited data on actual traffic load measurement results. However, the Ministry of PUPR has been implementing actual traffic load measurements using weigh-in-motion (WIM) technology to directly measure the load of passing vehicles. In this study, a risk assessment of the failure risk of a standard Bina Marga bridge with a 40-m span prestressed concrete girder type was conducted based on B-WIM load measurements. The results of this assessment indicate that the standard Bina Marga bridge has a failure risk of 1.48 x 10-4, which is smaller than the acceptable risk of failure according to the AASHTO LRFD Bridge Design Specification as referenced in SNI 1725 2016.</dc:description>
<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
<dc:date>2023-12-22</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/20466</dc:identifier>
<dc:identifier>10.5614/j.eng.technol.sci.2023.55.5.5</dc:identifier>
<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 55 No. 5 (2023); 558-568</dc:source>
<dc:source>2338-5502</dc:source>
<dc:source>2337-5779</dc:source>
<dc:source>10.5614/j.eng.technol.sci.2023.55.5</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/20466/6441</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2023 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Nugraha, W., Sidi, I. D., Suarjana, M., & Zulkifli, E. (2023). The Risk of Failure Assessment in Bina Marga Standard Designed Prestressed Concrete Girder Bridges under B-WIM Load Measurement. Journal of Engineering and Technological Sciences, 55(5), 558–568. https://doi.org/10.5614/j.eng.technol.sci.2023.55.5.5
Salin
IEEE
W. Nugraha, I. D. Sidi, M. Suarjana, and E. Zulkifli, “The Risk of Failure Assessment in Bina Marga Standard Designed Prestressed Concrete Girder Bridges under B-WIM Load Measurement,” Journal of Engineering and Technological Sciences, vol. 55, no. 5, pp. 558–568, 2023, doi: 10.5614/j.eng.technol.sci.2023.55.5.5.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.