Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Photometric Stereo Method Used for Woven Fabric Density Measurement Based on 3D Surface Structure

Journal of Engineering and Technological Sciences · Vol. 55 No. 6 (2023) · hlm. 659–668

DOI
10.5614/j.eng.technol.sci.2023.55.6.4
ISSN
2338-5502, 2337-5779
Terbit
2023-12-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

The measurement of the density of woven fabrics based on the vision method has been widely developed. This study used a photometric stereo method to measure the warp and weft density of woven fabrics based on the 3D surface structure. Six 2D images of the fabric were recorded, each with a different lighting direction. The six images were then reconstructed using the unbiased photometric stereo algorithm to produce the three-dimensional surface structure. The reconstructed image was used to detect and correct the skew angle with the Hough transform. For each image, a depth profile was made toward the x-axis to get the weft curve and towards the y-axis to get the warped curve. The two depth curves were filtered using a locally weighted smoothing (LOESS) filter. This study successfully measured the density of woven fabric with an average error for warp and weft of 0.64% and 0.45%, respectively.

Kata kunci

Jaringan kolaborasi para penulis

20 penulis · 40 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Politeknik Negeri Bandung
  • National Research and Innovation Agency
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
S. SuprijantoBandung Institute of Technology3
Dyah A. LestariBandung Institute of Technology2
Sasanti Tarini DarijantoBandung Institute of Technology2
Bambang WisnuadhiPoliteknik Negeri Bandung1
Brian YuliartoBandung Institute of Technology1
Irsyad Nashirul HaqBandung Institute of Technology1
F.X. Nugroho SoelamiBandung Institute of Technology1
Edi LeksonoBandung Institute of Technology1
Hesty SusantiBandung Institute of Technology1
Aisyah Nurul KhairiyahBandung Institute of Technology1
Gandi SugandiNational Research and Innovation Agency1
Andrianto HandojoBandung Institute of Technology1
Bambang S. P. AbednegoBandung Institute of Technology1
Moedji RahartoBandung Institute of Technology1
Fitri DianiPoliteknik Negeri Bandung1
Suprihanto SuprihantoPoliteknik Negeri Bandung1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Photometric Stereo Method Used for Woven Fabric Density Measurement Based on 3D Surface Structure</dc:title>
	<dc:creator>Juliastuti, Endang </dc:creator>
	<dc:creator>Setiawan, Irwan</dc:creator>
	<dc:creator>Nadhira, Vebi</dc:creator>
	<dc:creator>Kurniadi, Deddy</dc:creator>
	<dc:subject xml:lang="en-US">density measurement</dc:subject>
	<dc:subject xml:lang="en-US">Hough transform</dc:subject>
	<dc:subject xml:lang="en-US">photometric stereo</dc:subject>
	<dc:subject xml:lang="en-US">warp density</dc:subject>
	<dc:subject xml:lang="en-US">weft density</dc:subject>
	<dc:subject xml:lang="en-US">woven fabric</dc:subject>
	<dc:description xml:lang="en-US">The measurement of the density of woven fabrics based on the vision method has been widely developed. This study used a photometric stereo method to measure the warp and weft density of woven fabrics based on the 3D surface structure. Six 2D images of the fabric were recorded, each with a different lighting direction. The six images were then reconstructed using the unbiased photometric stereo algorithm to produce the three-dimensional surface structure. The reconstructed image was used to detect and correct the skew angle with the Hough transform. For each image, a depth profile was made toward the x-axis to get the weft curve and towards the y-axis to get the warped curve. The two depth curves were filtered using a locally weighted smoothing (LOESS) filter. This study successfully measured the density of woven fabric with an average error for warp and weft of 0.64% and 0.45%, respectively.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2023-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/20534</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2023.55.6.4</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 55 No. 6 (2023); 659-668</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2023.55.6</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/20534/6538</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>