Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Reducing Numerical Dispersion with High-Order Finite Difference to Increase Seismic Wave Energy: -

Journal of Engineering and Technological Sciences · Vol. 55 No. 4 (2023) · hlm. 402–418

DOI
10.5614/j.eng.technol.sci.2023.55.4.5
ISSN
2338-5502, 2337-5779
Terbit
2023-10-31
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

The numerical dispersion of 2D acoustic wave modeling has become an interesting subject in wave modeling in producing better subsurface images. Numerical dispersion is often caused by error accumulation with increased grid size in wave modeling. Wave modeling with high-order finite differences was carried out to reduce the numerical error. This study focused on variations in the numerical order to suppress the dispersion due to numerical errors. The wave equation used in modeling was discretized to higher orders for the spatial term, while the time term was discretized up to the second order, with every layer unabsorbed. The results showed that high-order FD was effective in reducing numerical dispersion. Thus, subsurface layers could be distinguished and observed clearly. However, from the modeling results, the wave energy decreased with increasing distance, so the layer interfaces were unclear. To increase the wave energy, we propose a new source in modeling. Furthermore, to reduce the computational time we propose a proportional grid after numerical dispersion has disappeared. This method can effectively increase the energy of reflected and transmitted waves at a certain depth. The results also showed that the computational time of high-order FD is relatively low, so this method can be used in solving dispersion problems.

Kata kunci

Jaringan kolaborasi para penulis

33 penulis · 82 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Institut Teknologi Kalimantan
  • National Research and Innovation Agency
  • Mulawarman University
  • Khalifa University of Science and Technology
  • Pusat Vulkanologi dan Mitigasi Bencana Geologi
  • Sebelas Maret University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sri WidiyantoroBandung Institute of Technology3
Roberd SaragihBandung Institute of Technology2
Dewi HandayaniBandung Institute of Technology2
Dewi SuhikaBandung Institute of Technology2
Nuning NurainiBandung Institute of Technology2
Ahmad SyahputraBandung Institute of Technology2
Kamal Khairudin SukandarBandung Institute of Technology1
Retno Wahyu DewantiInstitut Teknologi Kalimantan1
Nuning NurainiBandung Institute of Technology1
Muhammad FakhruddinNational Research and Innovation Agency1
Wisnu Prasojo WidiantoBandung Institute of Technology1
Yuki Novia NasutionMulawarman University1
Muhammad Abyan RizqoBandung Institute of Technology1
H. SusantoKhalifa University of Science and Technology1
S. SupriyonoAfiliasi tidak diketahui1
Wahyu TriyosoBandung Institute of Technology1
Hilman MardiyanBandung Institute of Technology1
Rexha Verdhora RyBandung Institute of Technology1
T. SeptyanaAfiliasi tidak diketahui1
Arii ArdjunaAfiliasi tidak diketahui1
Awan GunawanBandung Institute of Technology1
Gede SuantikaPusat Vulkanologi dan Mitigasi Bencana Geologi1
Fatkhan FatkhanBandung Institute of Technology1
Afnimar AfnimarBandung Institute of Technology1
Sorja KoesumaSebelas Maret University1
Mohamad RidwanBandung Institute of Technology1
Yoichi FukudaKyoto University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Reducing Numerical Dispersion with High-Order Finite Difference to Increase Seismic Wave Energy: -</dc:title>
	<dc:creator>Rizal, Syamsurizal</dc:creator>
	<dc:creator>Priyono, Awali</dc:creator>
	<dc:creator>Nugraha, Andri Dian</dc:creator>
	<dc:creator>Apri, Mochamad</dc:creator>
	<dc:creator>Moelyadi, Mochamad Agus</dc:creator>
	<dc:creator>Sahara, David Prambudi</dc:creator>
	<dc:subject xml:lang="en-US">acoustic wave</dc:subject>
	<dc:subject xml:lang="en-US">forward modeling</dc:subject>
	<dc:subject xml:lang="en-US">high-order finite difference</dc:subject>
	<dc:subject xml:lang="en-US">numerical dispersion</dc:subject>
	<dc:subject xml:lang="en-US">proportional grid method</dc:subject>
	<dc:subject xml:lang="en-US">Taylor series</dc:subject>
	<dc:subject xml:lang="en-US">-</dc:subject>
	<dc:description xml:lang="en-US">The numerical dispersion of 2D acoustic wave modeling has become an interesting subject in wave modeling in producing better subsurface images. Numerical dispersion is often caused by error accumulation with increased grid size in wave modeling. Wave modeling with high-order finite differences was carried out to reduce the numerical error. This study focused on variations in the numerical order to suppress the dispersion due to numerical errors. The wave equation used in modeling was discretized to higher orders for the spatial term, while the time term was discretized up to the second order, with every layer unabsorbed. The results showed that high-order FD was effective in reducing numerical dispersion. Thus, subsurface layers could be distinguished and observed clearly. However, from the modeling results, the wave energy decreased with increasing distance, so the layer interfaces were unclear. To increase the wave energy, we propose a new source in modeling. Furthermore, to reduce the computational time we propose a proportional grid after numerical dispersion has disappeared. This method can effectively increase the energy of reflected and transmitted waves at a certain depth. The results also showed that the computational time of high-order FD is relatively low, so this method can be used in solving dispersion problems.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2023-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/20539</dc:identifier>
	<dc:identifier>10.5614/j.eng.technol.sci.2023.55.4.5</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 55 No. 4 (2023); 402-418</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:source>10.5614/j.eng.technol.sci.2023.55.4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/20539/6373</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Journal of Engineering and Technological Sciences</dc:rights>
</oai_dc:dc>