Jurnal SINTA 1
The Non Linear Finite Element Model for Characterization of Brick Masonry Infill Wall under Cyclic Lateral Forces
Journal of Mathematical and Fundamental Sciences · Vol. 35 No. 2 (2013) · hlm. 129–145
- ISSN
- 2338-5510, 2337-5760
- Terbit
- 2013-12-28
- Penerbit
- Directorate for Research and Innovation (DRI) ITB
- Bahasa
- eng
Abstrak
Brick masonries as the infill walls between columns, for some degree of horizontal loading, are capable of resisting the horizontal load as shear walls. The different behavior of the structure due to the existence of the brick masonries in this case will change the stiffness as well as the strength of the structure. Ignoring this contribution of the brick masonries develops a misleading concept and design for the structure. In this study, a mathematical model representing the relationship between uniaxial stress vs. strain and the failure envelope of the infill brick wall masonry is developed. The implementation of the model is expected to be capable for analyzing the behavior of the structures subjected to external load in particular under cyclic loading. The model assumes that the contribution of the infill walls are taken into account for the analysis and the brick material used is considered as a compression dominated material. Analysis was carried out using non-linear discrete finite element method. Eight nodal isoparametric elements are developed representing concrete and brick masonry elements. Steel reinforcement and linkage elements are modeled as three nodal plane truss element. The variables studied in the analysis are degree of energy dissipation and stiffness degradation. The result showed that the model gives satisfactory results. However, some improvement needs to be considered in the linkage element model.
Jaringan kolaborasi para penulis
24 penulis · 60 tautan kepenulisan bersama · 6 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- Bandung Institute of Technology
- Politeknik Negeri Bandung
- Andalas University
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Iswandi Imran | Bandung Institute of Technology | 5 |
| Siti Aisyah Nurjannah | Bandung Institute of Technology | 2 |
| Ediansjah Zulkifli | Bandung Institute of Technology | 2 |
| Yurisman Yurisman | Bandung Institute of Technology | 1 |
| Muslinang Moestopo | Bandung Institute of Technology | 1 |
| Made Suarjana | Bandung Institute of Technology | 1 |
| Riawan Gunadi | Politeknik Negeri Bandung | 1 |
| Ananta Sofwan | Bandung Institute of Technology | 1 |
| Ivindra Pane | Bandung Institute of Technology | 1 |
| Awal Surono | Bandung Institute of Technology | 1 |
| Ruddy Kurniawan | Andalas University | 1 |
| Saptahari Sugiri | Bandung Institute of Technology | 1 |
| Indra Djati Sidi | Bandung Institute of Technology | 1 |
| Yudi Herdiansah | Bandung Institute of Technology | 1 |
| Herlien Dwiarti Soemari | Bandung Institute of Technology | 1 |
| Erwin Lim | Bandung Institute of Technology | 1 |
| Herlien Dwiarti Setio | Bandung Institute of Technology | 1 |
| Ahmed Najm Abdullah | Bandung Institute of Technology | 1 |
| Muhammad Asrurifak | Bandung Institute of Technology | 1 |
| Hendriyawan Hendriyawan | Bandung Institute of Technology | 1 |
| Wahyu Triyoso | Bandung Institute of Technology | 1 |
| M. Irsyam | Bandung Institute of Technology | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.