Melola Discovery

← Melola Discovery

Jurnal SINTA 1

SEM-EDX Analysis of Laser Surface Alloying on Aluminum

Journal of Mathematical and Fundamental Sciences · Vol. 45 No. 1 (2013) · hlm. 53–60

DOI
10.5614/j.math.fund.sci.2013.45.1.5
ISSN
2338-5510, 2337-5760
Terbit
2013-03-01
Penerbit
Directorate for Research and Innovation (DRI) ITB
Bahasa
eng

Abstrak

Microstructure and chemical composition changes on the alloyed aluminum surface were investigated using SEM-EDX analysis. A Q-switched Nd:YAg laser was focused to induce breakdown and plasma formation. The high plasma temperature and the shock wave pressure were responsible for speeding up the laser surface alloying process. The rapid heat and cooling process introduced a non-equilibrium condition causing changes in the microstructure as well as the chemical composition of the alloyed aluminum surface. The remelted layer and molten pools were realized after the aluminum received a power density greater than 5 x 108 Wcm-2. The chemical composition change confirms that the convection process had taken place during the alloying process.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 126 tautan kepenulisan bersama · 91 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Technology Malaysia
  • Universitas Gadjah Mada
  • Bandung Institute of Technology
  • Universitas Airlangga
  • IPB University
  • Hasanuddin University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Retna ApsariUniversitas Airlangga2
Siswanto SiswantoHasanuddin University1
Anita YuliatiUniversitas Airlangga1
Wahyu SrigutomoBandung Institute of Technology1
Nina Siti AminahBandung Institute of Technology1
Mitra DjamalBandung Institute of Technology1
Wahyudi WahyudiUniversitas Gadjah Mada1
Irzaman IrzamanIPB University1
Perdinan PerdinanIPB University1
Irwan MeilanoBandung Institute of Technology1
Wiwit SuryantoUniversitas Gadjah Mada1
Imam SuyantoUniversitas Gadjah Mada1
Ari SetiawanUniversitas Gadjah Mada1
Heriansyah PutraIPB University1
Herlan DarmawanUniversitas Gadjah Mada1
Maria EvitaBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jmfs/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">SEM-EDX Analysis of Laser Surface Alloying on Aluminum</dc:title>
	<dc:creator>Bidin, Noriah</dc:creator>
	<dc:creator>Abdullah, Mundzir</dc:creator>
	<dc:creator>Shaharin, Mohd Syafik</dc:creator>
	<dc:creator>Alwafi, Yusef Abdul</dc:creator>
	<dc:creator>Riban, Dwi Gustiono</dc:creator>
	<dc:creator>Yasin, Moh</dc:creator>
	<dc:subject xml:lang="en-US">chemical composition</dc:subject>
	<dc:subject xml:lang="en-US">Fe-Cu powder</dc:subject>
	<dc:subject xml:lang="en-US">intermetallics phase</dc:subject>
	<dc:subject xml:lang="en-US">laser alloying</dc:subject>
	<dc:subject xml:lang="en-US">microstructure</dc:subject>
	<dc:description xml:lang="en-US">Microstructure and chemical composition changes on the alloyed aluminum surface were investigated using SEM-EDX analysis. A Q-switched Nd:YAg laser was focused to induce breakdown and plasma formation. The high plasma temperature and the shock wave pressure were responsible for speeding up the laser surface alloying process. The rapid heat and cooling process introduced a non-equilibrium condition causing changes in the microstructure as well as the chemical composition of the alloyed aluminum surface. The remelted layer and molten pools were realized after the aluminum received a power density greater than 5 x 108 Wcm-2. The chemical composition change confirms that the convection process had taken place during the alloying process.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Innovation (DRI) ITB</dc:publisher>
	<dc:date>2013-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jmfs/article/view/792</dc:identifier>
	<dc:identifier>10.5614/j.math.fund.sci.2013.45.1.5</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Mathematical and Fundamental Sciences; Vol. 45 No. 1 (2013); 53-60</dc:source>
	<dc:source>2338-5510</dc:source>
	<dc:source>2337-5760</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jmfs/article/view/792/473</dc:relation>
</oai_dc:dc>