Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Temperature and Humidity Controlling System for Baby Incubator

Journal of Robotics and Control (JRC) · Vol. 2 No. 3 (2021) · hlm. 190–193

DOI
10.18196/jrc.2376
ISSN
2715-5072, 2715-5056
Terbit
2021-05-05
Penerbit
Universitas Muhammadiyah Yogyakarta
Bahasa
eng

Abstrak

Baby incubator is very important to keep the newborn’s body temperature especially for premature babies. The research aimed to design a baby incubator with controlled temperature and humidity. The incubator is designed to have a length of 60 cm, a width of 40 cm, and a height of 30 cm. System of baby incubator will automatically turn on or turn off the fan and or heating in accordance with the normal range of temperature and humidity in the incubator. The normal limits of temperature used is 33°C to 35°C. While the normal limits of air humidity in the incubator used is between 40% and 60%. Data acquisition system consists of temperature and humidity sensor, microcontroller ATmega8535, fan, heater, and LCD. LCD is used to display the results of measurements of temperature and humidity. Heater is used to regulate the temperature in the incubator. While fan is used to regulate the humidity in the incubator. Test results show that the heater will turn on if the temperature is below the limits of 33°C. While the fan will turn on if the humidity is above 60%

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 159 tautan kepenulisan bersama · 92 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Muhammadiyah University of Yogyakarta
  • Politeknik Perkapalan Negeri Surabaya
  • Ho Chi Minh City Open University
  • Sultan Agung Islamic University
  • Guilin University of Electronic Technology
  • National Institute of Oceanography and Fisheries
  • Guru Gobind Singh Indraprastha University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Afif Zuhri ArfiantoPoliteknik Perkapalan Negeri Surabaya8
Phong Thanh NguyenHo Chi Minh City Open University7
Tatiya Padang TunggalMuhammadiyah University of Yogyakarta5
Kunal KunalGuru Gobind Singh Indraprastha University5
Joessianto Eko PoetroPoliteknik Perkapalan Negeri Surabaya5
Robbi RahimUniversiti Malaysia Perlis5
Nur Hudha WijayaMuhammadiyah University of Yogyakarta4
Farhad WaseelKabul University3
Irfan AhmadKhurasan University2
Nishith ShahuGujarat Technological University2
Fajar Ahmad FauziMuhammadiyah University of Yogyakarta2
Shela Asta JulianiMuhammadiyah University of Yogyakarta2
Ahmad MustafaJordan University of Science and Technology1
Ermayanti IshakAfiliasi tidak diketahui1
Abdullah AbdullahUniversitas Islam Negeri Mataram1
Muslim TadjuddahAfiliasi tidak diketahui1
Naslina AliminaAfiliasi tidak diketahui1
Melody Angel MasadiAfiliasi tidak diketahui1
Husaini MaulanaAfiliasi tidak diketahui1
Alicia Cherie ChandraAfiliasi tidak diketahui1
Fahad Fauzan Al MunawarAfiliasi tidak diketahui1
Nurman Maulana IkhsanAfiliasi tidak diketahui1
Danil Eka FahrudinAfiliasi tidak diketahui1
Irma RahmawatiAkademi Farmasi Bumi Siliwangi1
M. Rizky Eka Putra Vi SafrillahAfiliasi tidak diketahui1
Nur AfifahAfiliasi tidak diketahui1
Amir MahmudAfiliasi tidak diketahui1
K. ShankarAlagappa University1
Alfana SanjayaMuhammadiyah University of Yogyakarta1
Ahmad Wahyu ApriandiMuhammadiyah University of Yogyakarta1
Nur HudhaMuhammadiyah University of Yogyakarta1
Zanella OktavihandaniMuhammadiyah University of Yogyakarta1
Lailicia Anggi KiranaMuhammadiyah University of Yogyakarta1
Budiman Anggi LesmanaMuhammadiyah University of Yogyakarta1
Wahidun Arif RijaliMuhammadiyah University of Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Temperature and Humidity Controlling System for Baby Incubator</dc:title>
	<dc:creator>Latif, Abdul</dc:creator>
	<dc:creator>Agus Widodo, Hendro</dc:creator>
	<dc:creator>Andri Atmoko, Rachmad</dc:creator>
	<dc:creator>Nguyen Phong, Thanh</dc:creator>
	<dc:creator>T.Helmy, Elsayed</dc:creator>
	<dc:subject xml:lang="en-US">temperature sensor</dc:subject>
	<dc:subject xml:lang="en-US">humidity sensor</dc:subject>
	<dc:subject xml:lang="en-US">baby incubator</dc:subject>
	<dc:subject xml:lang="en-US">microcontroller</dc:subject>
	<dc:description xml:lang="en-US">Baby incubator is very important to keep the newborn’s body temperature especially for premature babies. The research aimed to design a baby incubator with controlled temperature and humidity. The incubator is designed to have a length of 60 cm, a width of 40 cm, and a height of 30 cm. System of baby incubator will automatically turn on or turn off the fan and or heating in accordance with the normal range of temperature and humidity in the incubator. The normal limits of temperature used is 33°C to 35°C. While the normal limits of air humidity in the incubator used is between 40% and 60%. Data acquisition system consists of temperature and humidity sensor, microcontroller ATmega8535, fan, heater, and LCD. LCD is used to display the results of measurements of temperature and humidity. Heater is used to regulate the temperature in the incubator. While fan is used to regulate the humidity in the incubator. Test results show that the heater will turn on if the temperature is below the limits of 33°C. While the fan will turn on if the humidity is above 60%</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2021-05-05</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/7716</dc:identifier>
	<dc:identifier>10.18196/jrc.2376</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 2 No. 3 (2021): May; 190-193</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:source>10.18196/jrc.v2i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/7716/5772</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Journal of Robotics and Control</dc:rights>
</oai_dc:dc>