Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Digital Embedding System with Heater and Cooler

Journal of Robotics and Control (JRC) · Vol. 2 No. 3 (2021) · hlm. 161–165

DOI
10.18196/jrc.2371
ISSN
2715-5072, 2715-5056
Terbit
2021-05-05
Penerbit
Universitas Muhammadiyah Yogyakarta
Bahasa
eng

Abstrak

Embedding is an anatomical pathology laboratory device that is very important for producing quality slices and is also a device used to process paraffin tissue, so that the tissue can be cut with higher precision using a microtom (slicer). From the process of melting paraffin crystals using a manual heating process with bunsen flame heaters (fire heaters) so that the paraffin crystals can be transformed from the crystal into liquid. While paraffin crystals that have been processed from the crystal to liquid form are poured into the mold and left to freeze. In this case, an embedding system device will be made equipped with heating and cooling. The temperature used for the liquefaction process is 50C while the temperature for cooling is 17C. After making the process of making device, experiment device, and retrieving data, the error percentage results were 0.016% at the heating temperature and 0.08% at the coolant temperature, and the percentage of heating samples obtained in the sample was 61.3%, while the percentage samples for parts coolers get a value of 92%

Kata kunci

Jaringan kolaborasi para penulis

35 penulis · 122 tautan kepenulisan bersama · 104 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Muhammadiyah University of Yogyakarta
  • Khurasan University
  • Politeknik Perkapalan Negeri Surabaya
  • Ho Chi Minh City Open University
  • University of Management and Technology
  • Gujarat Technological University
  • Guilin University of Electronic Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Phong Thanh NguyenHo Chi Minh City Open University4
Mian Usman SattarUniversity of Management and Technology4
Wahidun Arif RijaliMuhammadiyah University of Yogyakarta4
Ipin PrasojoMuhammadiyah University of Surakarta3
Omar TananeUniversity of Hassan II Casablanca3
Elsayed T.HelmyNational Institute of Oceanography and Fisheries3
Hendro Agus WidodoPoliteknik Perkapalan Negeri Surabaya2
Andino MaselenoUniversiti Tenaga Nasional2
Afif Zuhri ArfiantoPoliteknik Perkapalan Negeri Surabaya2
Joessianto Eko PoetroPoliteknik Perkapalan Negeri Surabaya2
Farhad WaseelKabul University2
Fajar Ahmad FauziMuhammadiyah University of Yogyakarta2
Miftah IbrahimMuhammadiyah University of Yogyakarta2
Dian Friska NovelaMuhammadiyah University of Yogyakarta2
Sigit WidadiMuhammadiyah University of Yogyakarta2
Sultan Al Badrun MunirMuhammadiyah University of Yogyakarta2
Israa Ibraheem Al BarazanchiBaghdad College of Economic Sciences University2
Kunal KunalGuru Gobind Singh Indraprastha University1
Andi Gofer AlvianMuhammadiyah University of Yogyakarta1
Tatiya Padang TunggalMuhammadiyah University of Yogyakarta1
Shela Asta JulianiMuhammadiyah University of Yogyakarta1
Adelia AgtesaMuhammadiyah University of Yogyakarta1
Gabriel de Brito SilvaNile University1
Dhinakaran VeemanAfiliasi tidak diketahui1
Mian UsmanUniversity of Management and Technology1
Abdul LatifSultan Agung Islamic University1
Thanh Nguyen PhongHo Chi Minh City Open University1
Mohammad Saber NiazyKhurasan University1
Riaz Ahmad ZiarKardan University1
Sabawoon KhanKhurasan University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Digital Embedding System with Heater and Cooler</dc:title>
	<dc:creator>Wijaya, Nur Hudha</dc:creator>
	<dc:creator>Anggi Lesmana, Budiman</dc:creator>
	<dc:creator>Shahu, Nishith</dc:creator>
	<dc:creator>Ahmad, Irfan</dc:creator>
	<dc:creator>Andri Atmoko, Rachmad</dc:creator>
	<dc:subject xml:lang="en-US">histopathology</dc:subject>
	<dc:subject xml:lang="en-US">embedding</dc:subject>
	<dc:subject xml:lang="en-US">temperature</dc:subject>
	<dc:subject xml:lang="en-US">microcontroller</dc:subject>
	<dc:description xml:lang="en-US">Embedding is an anatomical pathology laboratory device that is very important for producing quality slices and is also a device used to process paraffin tissue, so that the tissue can be cut with higher precision using a microtom (slicer). From the process of melting paraffin crystals using a manual heating process with bunsen flame heaters (fire heaters) so that the paraffin crystals can be transformed from the crystal into liquid. While paraffin crystals that have been processed from the crystal to liquid form are poured into the mold and left to freeze. In this case, an embedding system device will be made equipped with heating and cooling. The temperature used for the liquefaction process is 50C while the temperature for cooling is 17C. After making the process of making device, experiment device, and retrieving data, the error percentage results were 0.016% at the heating temperature and 0.08% at the coolant temperature, and the percentage of heating samples obtained in the sample was 61.3%, while the percentage samples for parts coolers get a value of 92%</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2021-05-05</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/9993</dc:identifier>
	<dc:identifier>10.18196/jrc.2371</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 2 No. 3 (2021): May; 161-165</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:source>10.18196/jrc.v2i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/9993/5767</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Journal of Robotics and Control (JRC)</dc:rights>
</oai_dc:dc>