Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Induction Motor DTC Performance Improvement by Reducing Flux and Torque Ripples in Low Speed

Journal of Robotics and Control (JRC) · Vol. 3 No. 1 (2022) · hlm. 93–100

DOI
10.18196/jrc.v3i1.12550
ISSN
2715-5072, 2715-5056
Terbit
2022-01-12
Penerbit
Universitas Muhammadiyah Yogyakarta
Bahasa
eng

Abstrak

Since induction motors were invented, human civilization has changed forever. Due to their beneficial characteristics, induction motors are widely used and have become the most prevalent electrical counterparts. Many control strategies for induction motors have been developed, varying from scalar to vector control. In the class of vector control, the Direct Torque Control (DTC) was proposed as an alternative that ensures separated flux and torque control while remaining completely in a stationary reference frame. It offers direct inverter switching, reasonable simplicity than other vector control techniques, and less sensitivity to parameter variation. However, the use of hysteresis controllers in conventional DTC involves non-desired ripples in the system's flux and torque, which leads to bad system performances, primarily in low-speed operations. This paper aims to minimize the chattering and ensure the augmented system's performance in terms of robustness and stability. The proposed method is an improved version of DTC, which combines the addition of the Space Vector Machine (SVM) algorithm to the DTC and the increased number of DTC sectors that generate reference control voltages. Satisfactory results have been obtained by numerical simulation in MATLAB/Simulink. Eventually, the proposed method is proven to be a fast dynamic decoupled control that robustly responds to external disturbance and system uncertainties, especially in the low-speed range.

Kata kunci

Jaringan kolaborasi para penulis

14 penulis · 38 tautan kepenulisan bersama · 29 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Ecole Mohammadia d'Ingénieurs
  • Mohammed V University
  • University of Hassan II Casablanca
  • Hassania School of Public Works
  • Centre National de la Recherche Scientifique
  • Universitas Ahmad Dahlan
  • Université Sultan Moulay Slimane
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ahmed AbbouMohammed V University6
Mohamed MoutchouUniversity of Hassan II Casablanca5
Youssef MajdoubMohammed V University4
Rachid El AkhrifMohammed V University3
Souad TayaneUniversity of Hassan II Casablanca3
Alfian Ma’arifUniversitas Ahmad Dahlan3
Mohamed BararaCentre National de la Recherche Scientifique2
Kamal BayoudeUniversity of Hassan II Casablanca2
Farid OufqirUniversité Sultan Moulay Slimane2
Mounir DerriHassania School of Public Works1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Induction Motor DTC Performance Improvement by Reducing Flux and Torque Ripples in Low Speed</dc:title>
	<dc:creator>Zahraoui, Yassine</dc:creator>
	<dc:creator>Akherraz, Mohamed</dc:creator>
	<dc:creator>Fahassa, Chaymae</dc:creator>
	<dc:creator>Elbadaoui, Sara</dc:creator>
	<dc:subject xml:lang="en-US">Induction motor drive</dc:subject>
	<dc:subject xml:lang="en-US">Performance improvement</dc:subject>
	<dc:subject xml:lang="en-US">Low speed</dc:subject>
	<dc:subject xml:lang="en-US">Space vector modulation</dc:subject>
	<dc:subject xml:lang="en-US">Twelve sectors DTC</dc:subject>
	<dc:subject xml:lang="en-US">Total harmonic distortion</dc:subject>
	<dc:subject xml:lang="en-US">Flux distortion</dc:subject>
	<dc:subject xml:lang="en-US">Torque pulsation</dc:subject>
	<dc:subject xml:lang="en-US">Harmonic reduction</dc:subject>
	<dc:description xml:lang="en-US">Since induction motors were invented, human civilization has changed forever. Due to their beneficial characteristics, induction motors are widely used and have become the most prevalent electrical counterparts. Many control strategies for induction motors have been developed, varying from scalar to vector control. In the class of vector control, the Direct Torque Control (DTC) was proposed as an alternative that ensures separated flux and torque control while remaining completely in a stationary reference frame. It offers direct inverter switching, reasonable simplicity than other vector control techniques, and less sensitivity to parameter variation. However, the use of hysteresis controllers in conventional DTC involves non-desired ripples in the system's flux and torque, which leads to bad system performances, primarily in low-speed operations. This paper aims to minimize the chattering and ensure the augmented system's performance in terms of robustness and stability. The proposed method is an improved version of DTC, which combines the addition of the Space Vector Machine (SVM) algorithm to the DTC and the increased number of DTC sectors that generate reference control voltages. Satisfactory results have been obtained by numerical simulation in MATLAB/Simulink. Eventually, the proposed method is proven to be a fast dynamic decoupled control that robustly responds to external disturbance and system uncertainties, especially in the low-speed range.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2022-01-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/12550</dc:identifier>
	<dc:identifier>10.18196/jrc.v3i1.12550</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 3 No. 1 (2022): January; 93-100</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:source>10.18196/jrc.v3i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/12550/6928</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Yassine Zahraoui</dc:rights>
</oai_dc:dc>