Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Design of a Control System for Hybrid Quadcopter Tilt Rotor Based on Backward Transition Algorithm

Journal of Robotics and Control (JRC) · Vol. 6 No. 1 (2024) · hlm. 31–39

DOI
10.18196/jrc.v6i1.22594
ISSN
2715-5072, 2715-5056
Terbit
2024-11-16
Penerbit
Universitas Muhammadiyah Yogyakarta
Bahasa
eng

Abstrak

An Unmanned Aerial Vehicle (UAV) is an unmanned aerial vehicle that can be controlled using either automatic or manual control. UAVs are divided into two types: rotary-wing, which uses rotating propellers to fly the aircraft, and fixed-wing, which uses fixed wings to fly the aircraft. One of the advanced developments in UAV technology is the Hybrid Vertical Take-Off Landing Quadrotor Tiltrotor Aircraft (QTRA) system, which combines the quadrotor UAV system, classified under rotary-wing, with the fixed-wing UAV system. This allows for vertical takeoff and landing as well as the ability to cruise at maximum speed. In the transition between flight modes, from quadcopter to fixed-wing and vice versa, the transition is carried out by changing the thrust direction of the two front UAV rotors from horizontal to vertical and vice versa. The change in thrust angle on the rotor is referred to as a tilt rotor. The problem that arises from changing the aircraft mode from fixed-wing to quadcopter is controlling the UAV's transition mode, which must not lose its lift force. Therefore, the tilt angle must be changed as quickly as possible. To solve this issue, a Hybrid VTOL Quadrotor Tiltrotor aircraft concept was designed with fast response, controlled by a Proportional Derivative (PD) controller. The results of the PD control system response were tested in simulations by observing the X and Z positions of the UAV, which can stabilize the position during the transition. The success criteria targeted for a stable response include a tilting angle with a settling time of 7 seconds, an overshoot height of 16 meters, and a steady-state error approaching zero. From the transition simulation tests, the system response data showed performance with an X-axis settling time of 37 seconds, a steady-state error value of 0.1 meters, and an overshoot of 0.4%.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 33 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Bandung Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bambang Lelono WidjiantoroInstitut Teknologi Sepuluh Nopember3
Katherin IndriawatiInstitut Teknologi Sepuluh Nopember2
Kadek Dwi WahyuadnyanaInstitut Teknologi Sepuluh Nopember2
Murry RadityaInstitut Teknologi Sepuluh Nopember2
Hilton TnunayBandung Institute of Technology1
Ardyas Nur AufaAfiliasi tidak diketahui1
Delima Palwa SariInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design of a Control System for Hybrid Quadcopter Tilt Rotor Based on Backward Transition Algorithm</dc:title>
	<dc:creator>Darwito, Purwadi Agus</dc:creator>
	<dc:creator>Agustina, Nilla Perdana</dc:creator>
	<dc:creator>Ahnaf, Hudzaifa Dhiaul</dc:creator>
	<dc:creator>Roosydi, Syahrizal Faried</dc:creator>
	<dc:creator>Pratama, Detak Yan</dc:creator>
	<dc:creator>Biyanto, Totok Ruki</dc:creator>
	<dc:subject xml:lang="en-US">Hybrid VTOL Tilt-rotor</dc:subject>
	<dc:subject xml:lang="en-US">MAV</dc:subject>
	<dc:subject xml:lang="en-US">Proportional Derivative Control</dc:subject>
	<dc:subject xml:lang="en-US">UAV Backward Transition.</dc:subject>
	<dc:description xml:lang="en-US">An Unmanned Aerial Vehicle (UAV) is an unmanned aerial vehicle that can be controlled using either automatic or manual control. UAVs are divided into two types: rotary-wing, which uses rotating propellers to fly the aircraft, and fixed-wing, which uses fixed wings to fly the aircraft. One of the advanced developments in UAV technology is the Hybrid Vertical Take-Off Landing Quadrotor Tiltrotor Aircraft (QTRA) system, which combines the quadrotor UAV system, classified under rotary-wing, with the fixed-wing UAV system. This allows for vertical takeoff and landing as well as the ability to cruise at maximum speed. In the transition between flight modes, from quadcopter to fixed-wing and vice versa, the transition is carried out by changing the thrust direction of the two front UAV rotors from horizontal to vertical and vice versa. The change in thrust angle on the rotor is referred to as a tilt rotor. The problem that arises from changing the aircraft mode from fixed-wing to quadcopter is controlling the UAV's transition mode, which must not lose its lift force. Therefore, the tilt angle must be changed as quickly as possible. To solve this issue, a Hybrid VTOL Quadrotor Tiltrotor aircraft concept was designed with fast response, controlled by a Proportional Derivative (PD) controller. The results of the PD control system response were tested in simulations by observing the X and Z positions of the UAV, which can stabilize the position during the transition. The success criteria targeted for a stable response include a tilting angle with a settling time of 7 seconds, an overshoot height of 16 meters, and a steady-state error approaching zero. From the transition simulation tests, the system response data showed performance with an X-axis settling time of 37 seconds, a steady-state error value of 0.1 meters, and an overshoot of 0.4%.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2024-11-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/22594</dc:identifier>
	<dc:identifier>10.18196/jrc.v6i1.22594</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 6 No. 1 (2025); 31-39</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:source>10.18196/jrc.v6i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/22594/9617</dc:relation>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/22594/11157</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Purwadi Agus Darwito, Nilla Perdana Agustina, Hudzaifa Dhiaul Ahnaf, Syahrizal Faried Roosydi,  Detak Yan Pratama, Totok Ruki Biyanto</dc:rights>
</oai_dc:dc>