Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Bio-Inspired Robotics: Kinematic and Gait Analysis of Quad and Hexa-Legged Systems

Journal of Robotics and Control (JRC) · Vol. 6 No. 2 (2025) · hlm. 757–768

DOI
10.18196/jrc.v6i2.23905
ISSN
2715-5072, 2715-5056
Terbit
2025-04-08
Penerbit
Universitas Muhammadiyah Yogyakarta
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Navigating hazardous environments, such as areas with fire risks, wild animal activity, or inaccessible terrains, poses significant challenges, necessitating the development of bio-inspired robotic systems. This study focuses on the biomechanical design and kinematic analysis of a spider-mimicking robot, specifically examining quad and hexa-legged configurations to optimize movement efficiency and stability. The research employed 3D Computer-Aided Design (CAD) in Fusion 360 to model and simulate the robot's leg framework, analyzing deformation, tension, and strain. Fused Deposition Modelling (FDM) with Poly Lactic Acid (PLA) material was used for component fabrication, chosen for its balance of lightweight properties and structural integrity, validated through stress analysis. A single limb’s forward and reverse kinematics were studied, enabling the development of optimized gait patterns. SIMSCAPE Multibody in MATLAB was utilized for dynamic simulations, and Proportional Derivative (PD) and Proportional Integral Derivative (PID) controllers were tested to evaluate trajectory tracking accuracy and stability. Results show that the six-legged configuration exhibits superior stability with a 15% improvement in gait cycle efficiency and a 20% reduction in energy consumption per stride compared to the four-legged counterpart. The use of PID controllers further enhanced performance, achieving a 12% improvement in settling time and reducing oscillations in trajectory tracking tasks. The choice of PLA material ensured durability under operational loads, with minimal deformation over repeated stress cycles. Servomotor selection and configuration were tailored to optimize torque and speed, enabling precise leg control. This study highlights the potential of bio-inspired robots to advance robotic mobility through optimized kinematics and material choices.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 62 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Manipal Academy of Higher Education
  • Universiti Putra Malaysia
  • Lovely Professional University
  • St. Joseph’s College of Engineering
  • Symbiosis International University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Aldrin Claytus VazSt. Joseph’s College of Engineering2
Navya Thirumaleswar HegdeAfiliasi tidak diketahui2
Vishnu G. NairManipal Academy of Higher Education2
Madala Chaitanya SaiManipal Academy of Higher Education2
B. Satish ShenoyManipal Academy of Higher Education1
Gaurav GulabaniManipal Academy of Higher Education1
Beegum Shahnaz Abdul KarimManipal Academy of Higher Education1
Jayakrishnan RadhakrishnanManipal Academy of Higher Education1
Akhil Appu ShettyManipal Academy of Higher Education1
Chrompet Ramesh SrinivasanManipal Academy of Higher Education1
Glenson ToneyLovely Professional University1
Gaurav SethiLovely Professional University1
Cherry BhargavaSymbiosis International University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Bio-Inspired Robotics: Kinematic and Gait Analysis of Quad and Hexa-Legged Systems</dc:title>
	<dc:creator>Singh, Spoorthi</dc:creator>
	<dc:creator>Zuber, Mohammad</dc:creator>
	<dc:creator>Bhat, Naman</dc:creator>
	<dc:creator>Kumar.S, Rathina</dc:creator>
	<dc:creator>Basri, Ernnie Illyani</dc:creator>
	<dc:creator>Ahmad, Kamarul Arifin</dc:creator>
	<dc:creator>Yadav, Manish Varun</dc:creator>
	<dc:creator>Hegde, Navya Thirumaleshwar</dc:creator>
	<dc:subject xml:lang="en-US">Bio-Inspired Robot</dc:subject>
	<dc:subject xml:lang="en-US">Forward and Reverse Kinematics</dc:subject>
	<dc:subject xml:lang="en-US">Hexa Leg Robot</dc:subject>
	<dc:subject xml:lang="en-US">Limb Kinematics</dc:subject>
	<dc:subject xml:lang="en-US">Quad Leg Robot</dc:subject>
	<dc:subject xml:lang="en-US">Spider-Mimicking Robot</dc:subject>
	<dc:description xml:lang="en-US">Navigating hazardous environments, such as areas with fire risks, wild animal activity, or inaccessible terrains, poses significant challenges, necessitating the development of bio-inspired robotic systems. This study focuses on the biomechanical design and kinematic analysis of a spider-mimicking robot, specifically examining quad and hexa-legged configurations to optimize movement efficiency and stability. The research employed 3D Computer-Aided Design (CAD) in Fusion 360 to model and simulate the robot's leg framework, analyzing deformation, tension, and strain. Fused Deposition Modelling (FDM) with Poly Lactic Acid (PLA) material was used for component fabrication, chosen for its balance of lightweight properties and structural integrity, validated through stress analysis. A single limb’s forward and reverse kinematics were studied, enabling the development of optimized gait patterns. SIMSCAPE Multibody in MATLAB was utilized for dynamic simulations, and Proportional Derivative (PD) and Proportional Integral Derivative (PID) controllers were tested to evaluate trajectory tracking accuracy and stability. Results show that the six-legged configuration exhibits superior stability with a 15% improvement in gait cycle efficiency and a 20% reduction in energy consumption per stride compared to the four-legged counterpart. The use of PID controllers further enhanced performance, achieving a 12% improvement in settling time and reducing oscillations in trajectory tracking tasks. The choice of PLA material ensured durability under operational loads, with minimal deformation over repeated stress cycles. Servomotor selection and configuration were tailored to optimize torque and speed, enabling precise leg control. This study highlights the potential of bio-inspired robots to advance robotic mobility through optimized kinematics and material choices.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2025-04-08</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/23905</dc:identifier>
	<dc:identifier>10.18196/jrc.v6i2.23905</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 6 No. 2 (2025); 757-768</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/23905/11435</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 spoorthi singh, Mohammad Zuber, Naman Bhat, Rathina Kumar s, Ernnie Illyani Basri, Kamarul Arifin Ahmad, Manish Varun Yadav, Navya Thirumaleshwar Hegde</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>