Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Development and Evaluation of a Low-Cost CNC Wood Carving Machine for Artisanal Applications: Implementation of CNC wood carving machine

Journal of Robotics and Control (JRC) · Vol. 6 No. 2 (2025) · hlm. 615–623

DOI
10.18196/jrc.v6i2.25554
ISSN
2715-5072, 2715-5056
Terbit
2025-03-18
Penerbit
Universitas Muhammadiyah Yogyakarta
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Improving the quality of the produced artwork would require the development of computer numerical control (CNC) technology for various wood shaping processes. This paper presents the development and implementation of a CNC wood carving machine. This project aims to produce wood carvings with high precision and low cost. The electronic components were selected, the mechanical frame of the machine was built, and all parts of the machine were assembled and installed. The presented wood carving machine is based on the principle of drawing the desired shape, translating it into G-code, and then sending it to the microcontroller program. The microcontroller sends instructions to the CNC shield, which drives three stepper motors in a synchronized manner in order to produce the desired carving model. The maximum workpiece of the caving machine designed to be 30x30 cm. Experiments were conducted to test the functionality of the proposed CNC wood carving machine. The results showed that the carved models created by this machine had a carving precision range from ±0.1 to ±0.15 mm and a carving speed of approximately 500 rpm. The proposed CNC can be used to produce low-cost artisanal woodwork applications.

Jaringan kolaborasi para penulis

20 penulis · 60 tautan kepenulisan bersama · 31 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Palestine Technical University - Kadoorie
  • Al-Balqa Applied University
  • University of Business and Technology
  • University of Missouri
  • A'Sharqiyah University
  • Ajloun National University
  • Al-Hussein Bin Talal University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Basim A. AlsayidPalestine Technical University - Kadoorie4
Mahmoud A. M. AlbreemA'Sharqiyah University3
Mutasem Sh. AlkhasawnehAjloun National University3
Anwar Al–MoflehAl-Balqa Applied University3
Amir Abu Al-AishAl-Hussein Bin Talal University3
Amir Abu_Al_AishAfiliasi tidak diketahui2
M. E. NofalAfiliasi tidak diketahui2
Ghazi QaryoutiAfiliasi tidak diketahui1
Anwar AlmoflehAfiliasi tidak diketahui1
Abdel Rahman SalbadAl-Balqa Applied University1
Sohaib A. TamimiAl-Balqa Applied University1
Qazem M. JaberAl-Balqa Applied University1
Yazeed AlawnehPalestine Technical University - Kadoorie1
Anees Abu SneinehAfiliasi tidak diketahui1
Arafat A. A. ShabanehAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development and Evaluation of a Low-Cost CNC Wood Carving Machine for Artisanal Applications: Implementation of CNC wood carving machine</dc:title>
	<dc:creator>Sneineh, Anees Abu</dc:creator>
	<dc:creator>Salah, Wael A.</dc:creator>
	<dc:creator>Zneid, Basem Abu</dc:creator>
	<dc:creator>Elnaggar, Mohamed</dc:creator>
	<dc:creator>Abuhelwa, Mai</dc:creator>
	<dc:description xml:lang="en-US">Improving the quality of the produced artwork would require the development of computer numerical control (CNC) technology for various wood shaping processes. This paper presents the development and implementation of a CNC wood carving machine. This project aims to produce wood carvings with high precision and low cost. The electronic components were selected, the mechanical frame of the machine was built, and all parts of the machine were assembled and installed. The presented wood carving machine is based on the principle of drawing the desired shape, translating it into G-code, and then sending it to the microcontroller program. The microcontroller sends instructions to the CNC shield, which drives three stepper motors in a synchronized manner in order to produce the desired carving model. The maximum workpiece of the caving machine designed to be 30x30 cm. Experiments were conducted to test the functionality of the proposed CNC wood carving machine. The results showed that the carved models created by this machine had a carving precision range from ±0.1 to ±0.15 mm and a carving speed of approximately 500 rpm. The proposed CNC can be used to produce low-cost artisanal woodwork applications.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2025-03-18</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/25554</dc:identifier>
	<dc:identifier>10.18196/jrc.v6i2.25554</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 6 No. 2 (2025); 615-623</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/25554/11391</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Anees Abu Sneineh, Wael A. Salah, Basem Abu Zneid, Mohamed Elnaggar , Mai Abuhelwa </dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>