Akses terbuka
Jurnal
SINTA 1
Tracking Improvement of a 3-DOF Arm Robot using Computed Torque and Adaptive Sliding Mode Controls
Journal of Robotics and Control (JRC) · Vol. 6 No. 5 (2025) · hlm. 2436–2443
ISSN 2715-5072, 2715-5056
Terbit 2025-10-20
Penerbit Universitas Muhammadiyah Yogyakarta
Bahasa eng
Abstrak
This paper discusses the application of sliding mode control (SMC) on a 3 DOF arm robot using Robotic Toolbox, MATLAB. Due to suitable for industrial pick-and-place tasks requiring high precision then combining an adaptive SMC with classical computed torque control (CTC) was supposed to improve tracking control system performance. This was indicated by root mean square, overshoot, and rise time on the end effector for each task-space trajectories x, y, z. The proposed control design was based on the dynamics derived from the Euler Lagrange equation which produces the CTC-computed torque fed into SMC to determine sliding mode control. Stability and robustness against uncertainty was derived from Lyapunov function. Hence, the contribution of this study included tracking performance, stability and robustness to uncertainty on a robotic arm using CTC and adaptive SMC (ASMC). The simulation results show the effectiveness of the proposed method, an adaptive SMC over the classical SMC and or CTC only methods in arm robot tracking performances. The CTC+ASMC methods yielded better rise time, overshoot and RMSE performances than the classical CTC control performance with the average improvements were 23.27%, 36.23% and 0.49% respectively.
Jaringan kolaborasi para penulis
14 penulis ·
33 tautan kepenulisan bersama
· 18 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
National Research and Innovation Agency Telkom University Universiti Teknologi Petronas National University of Malaysia Taylor's College Coventry University
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Tracking Improvement of a 3-DOF Arm Robot using Computed Torque and Adaptive Sliding Mode Controls</dc:title>
<dc:creator>Susanto, Erwin</dc:creator>
<dc:creator>Sumaryo, Sony</dc:creator>
<dc:creator>Hassan, Mohd Fadzil</dc:creator>
<dc:subject xml:lang="en-US">A 3DOF Arm Robot</dc:subject>
<dc:subject xml:lang="en-US">Computed Torque Control</dc:subject>
<dc:subject xml:lang="en-US">Adaptive Sliding Mode Control</dc:subject>
<dc:subject xml:lang="en-US">Tracking Improvement</dc:subject>
<dc:subject xml:lang="en-US">Lyapunov Stability</dc:subject>
<dc:description xml:lang="en-US">This paper discusses the application of sliding mode control (SMC) on a 3 DOF arm robot using Robotic Toolbox, MATLAB. Due to suitable for industrial pick-and-place tasks requiring high precision then combining an adaptive SMC with classical computed torque control (CTC) was supposed to improve tracking control system performance. This was indicated by root mean square, overshoot, and rise time on the end effector for each task-space trajectories x, y, z. The proposed control design was based on the dynamics derived from the Euler Lagrange equation which produces the CTC-computed torque fed into SMC to determine sliding mode control. Stability and robustness against uncertainty was derived from Lyapunov function. Hence, the contribution of this study included tracking performance, stability and robustness to uncertainty on a robotic arm using CTC and adaptive SMC (ASMC). The simulation results show the effectiveness of the proposed method, an adaptive SMC over the classical SMC and or CTC only methods in arm robot tracking performances. The CTC+ASMC methods yielded better rise time, overshoot and RMSE performances than the classical CTC control performance with the average improvements were 23.27%, 36.23% and 0.49% respectively.</dc:description>
<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
<dc:date>2025-10-20</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/26728</dc:identifier>
<dc:identifier>10.18196/jrc.v6i5.26728</dc:identifier>
<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 6 No. 5 (2025); 2436-2443</dc:source>
<dc:source>2715-5072</dc:source>
<dc:source>2715-5056</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/26728/12668</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2025 Erwin Susanto, Sony Sumaryo, Mohd Fadzil Hassan</dc:rights>
<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Susanto, E., Sumaryo, S., & Hassan, M. F. (2025). Tracking Improvement of a 3-DOF Arm Robot using Computed Torque and Adaptive Sliding Mode Controls. Journal of Robotics and Control (JRC), 6(5), 2436–2443. https://doi.org/10.18196/jrc.v6i5.26728
Salin
IEEE
E. Susanto, S. Sumaryo, and M. F. Hassan, “Tracking Improvement of a 3-DOF Arm Robot using Computed Torque and Adaptive Sliding Mode Controls,” Journal of Robotics and Control (JRC), vol. 6, no. 5, pp. 2436–2443, 2025, doi: 10.18196/jrc.v6i5.26728.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.