Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Disturbance-Observer-Based Fault-Tolerant Sensorless Speed Control for Three-Phase Induction Motors

Journal of Robotics and Control (JRC) · Vol. 7 No. 2 (2026) · hlm. 3571–3586

DOI
10.18196/jrc.v7i2.29333
ISSN
2715-5072, 2715-5056
Terbit
2026-03-01
Penerbit
Universitas Muhammadiyah Yogyakarta
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Speed sensorless control in three-phase induction motors relies on accurate observer‑based speed estimation, making it susceptible to current sensor faults. Thus, incorporating an FTC mechanism is crucial to maintain robustness and reliability under fault conditions. This study contributes to provides a significant advancement in the development of resilient control systems for electric drives, addressing critical challenges in maintaining performance under fault conditions. This study develop a FTC strategy integrated with sensorless speed control for an induction motor hardware platform. A disturbance observer (DO) approach is employed to simultaneously estimate both rotational speed and disturbance signals, enabling the distinction between current sensor faults and load torque variations. Experimental-based evaluations were performed using integration between MATLAB/Simulink and hardware. The performance of the proposed algorithm was evaluated through three tests: the Set‑Point Change Test, the Torque‑Load Variation Test, and the Current‑Sensor Fault Test. Compared with a baseline DO-based sensorless controller without FTC, the proposed method prevents fault-induced degradation (e.g., loss of steady-state tracking/hunting behavior) by reconstructing the corrupted current channel and maintaining stable closed-loop operation during the fault. Under a step bias fault, the proposed scheme achieves a current recovery time of approximately 1.56 s, after which the speed response returns to the steady-state tracking band without current surge. The results demonstrate that the proposed method effectively compensates current-sensor faults in measurable terms thereby improving the robustness and reliability of DO-based sensorless induction-motor drives.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 42 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Kyushu Institute of Technology
  • Universitas Nahdlatul Ulama Surabaya
  • Bandung Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bambang Lelono WidjiantoroInstitut Teknologi Sepuluh Nopember4
Moh Kamalul WafiInstitut Teknologi Sepuluh Nopember2
Teguh HerlambangUniversitas Nahdlatul Ulama Surabaya2
Reza Maliki AkbarInstitut Teknologi Sepuluh Nopember2
Choirul MufitInstitut Teknologi Sepuluh Nopember2
Purwadi Agus DarwitoInstitut Teknologi Sepuluh Nopember2
Kadek Dwi WahyuadnyanaInstitut Teknologi Sepuluh Nopember2
Hendro NurhadiInstitut Teknologi Sepuluh Nopember1
Hendro NurhadiInstitut Teknologi Sepuluh Nopember1
Febry Pandu WijayaAfiliasi tidak diketahui1
Febry Pandu WijayaAfiliasi tidak diketahui1
Nawangsih NawangsihInstitut Teknologi Sepuluh Nopember1
Cindy Reviko EkatiaraAfiliasi tidak diketahui1
Hilton TnunayBandung Institute of Technology1
Ardyas Nur AufaAfiliasi tidak diketahui1
Atras Yonda FariziInstitut Teknologi Sepuluh Nopember1
Rida Ayu ArfiantiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.umy.ac.id/index.php/jrc/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Disturbance-Observer-Based Fault-Tolerant Sensorless Speed Control for Three-Phase Induction Motors</dc:title>
	<dc:creator>Halim, Christian Vieri</dc:creator>
	<dc:creator>Husna, Tanalina Faridatul</dc:creator>
	<dc:creator>Indriawati, Katherin</dc:creator>
	<dc:creator>Sebe, Noboru</dc:creator>
	<dc:subject xml:lang="en-US">induction motor</dc:subject>
	<dc:subject xml:lang="en-US">fault tolerant</dc:subject>
	<dc:subject xml:lang="en-US">extended state observer</dc:subject>
	<dc:subject xml:lang="en-US">speed sensorless control</dc:subject>
	<dc:description xml:lang="en-US">Speed sensorless control in three-phase induction motors relies on accurate observer‑based speed estimation, making it susceptible to current sensor faults. Thus, incorporating an FTC mechanism is crucial to maintain robustness and reliability under fault conditions. This study contributes to provides a significant advancement in the development of resilient control systems for electric drives, addressing critical challenges in maintaining performance under fault conditions. This study develop a FTC strategy integrated with sensorless speed control for an induction motor hardware platform. A disturbance observer (DO) approach is employed to simultaneously estimate both rotational speed and disturbance signals, enabling the distinction between current sensor faults and load torque variations. Experimental-based evaluations were performed using integration between MATLAB/Simulink and hardware. The performance of the proposed algorithm was evaluated through three tests: the Set‑Point Change Test, the Torque‑Load Variation Test, and the Current‑Sensor Fault Test. Compared with a baseline DO-based sensorless controller without FTC, the proposed method prevents fault-induced degradation (e.g., loss of steady-state tracking/hunting behavior) by reconstructing the corrupted current channel and maintaining stable closed-loop operation during the fault. Under a step bias fault, the proposed scheme achieves a current recovery time of approximately 1.56 s, after which the speed response returns to the steady-state tracking band without current surge. The results demonstrate that the proposed method effectively compensates current-sensor faults in measurable terms thereby improving the robustness and reliability of DO-based sensorless induction-motor drives.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Muhammadiyah Yogyakarta</dc:publisher>
	<dc:date>2026-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.umy.ac.id/index.php/jrc/article/view/29333</dc:identifier>
	<dc:identifier>10.18196/jrc.v7i2.29333</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Robotics and Control (JRC); Vol. 7 No. 2 (2026); 3571-3586</dc:source>
	<dc:source>2715-5072</dc:source>
	<dc:source>2715-5056</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.umy.ac.id/index.php/jrc/article/view/29333/12483</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Christian Vieri Halim, Tanalina Faridatul Husna, Katherin Indriawati, Noboru Sebe</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>