Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Increasing Inventory Rating Factor of Steel Truss Bridge Through Orthotropic Steel Deck Panel Application

Journal of the Civil Engineering Forum · Vol. 8 No. 3 (2022) · hlm. 291–300

DOI
10.22146/jcef.3416
ISSN
2549-5925, 2581-1037
Terbit
2022-07-28
Penerbit
Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada
Bahasa
eng

Abstrak

Currently, 18,648 bridges with a total length of 510,366 km have been constructed in Indonesia, but only 86% are in good condition, while the rest are damaged. Steel truss bridge damage generally occurs on the RC decks, and its repair is often implemented through deck replacement or redecking using Orthotropic Steel Deck (OSD) panel. In Indonesia, this method has only been applied limitedly at the Citarum I Bridge in 2009 and the Cisadane Bridge in 2013, while the effect on the existing steel truss bridge is unknown. Therefore, this study aims to evaluate the steel truss bridge performance after OSD panel redecking through numerical modeling. The design process of the OSD panel was carried out by micro-modeling on ABAQUS CAE using shell elements with a mesh size of 50x50 mm and pinned boundary conditions. In this stage, the materials were assumed to be elastic with small deformations. The evaluation of steel truss bridge performance was performed on the A-class steel truss bridge Bina Marga design standard with a 60 m span by comparing the existing bridge inventory rating factor (using RC decks) to OSD panel redecking, which is an indicator of bridge self-weight reduction. Based on the structural macro-model developed using SAP2000, the bridge self-weight reduced the axial tension and compression forces on the steel truss bridge mainframe by 20.6%-24.6% and 20.5%-24.5%, respectively. Consequently, this increased the inventory rating factor by 9.3%-9.5%. In other words, using the OSD panels lighter than the existing RC decks increases the steel truss bridge capacity to resist the live load or vehicle rating throughout its service life.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 59 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Port and Airport Research Institute
  • Universiti Teknologi MARA
  • Sebelas Maret University
  • Jadavpur University
  • National Cheng Kung University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Iman SatyarnoUniversitas Gadjah Mada3
Angga Fajar SetiawanUniversitas Gadjah Mada2
Yusuf HarokiPort and Airport Research Institute2
Shuanglan WuPort and Airport Research Institute1
Akhmad AminullahUniversitas Gadjah Mada1
Bambang SuhendroUniversitas Gadjah Mada1
Wira Sucitra IbrahimUniversitas Gadjah Mada1
Bambang SupriyadiUniversitas Gadjah Mada1
Renga Rao KrishnamoorthyUniversiti Teknologi MARA1
Kukuh Adhi KafieUniversitas Gadjah Mada1
Hsuan‐Teh HuNational Cheng Kung University1
Muhamad Fauzi DarmawanUniversitas Gadjah Mada1
Noorsuhada Md NorUniversiti Teknologi MARA1
Sidiq PurnomoAfiliasi tidak diketahui1
Ignatius Harry SumartonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ugm.ac.id/v3/jcef/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Increasing Inventory Rating Factor of Steel Truss Bridge Through Orthotropic Steel Deck Panel Application</dc:title>
	<dc:creator>Pradana, Erik Wahyu</dc:creator>
	<dc:creator>Triwiyono, Andreas</dc:creator>
	<dc:creator>Awaludin, Ali</dc:creator>
	<dc:creator>Mandal, Saroj</dc:creator>
	<dc:subject xml:lang="en-US">Redecking</dc:subject>
	<dc:subject xml:lang="en-US">Orthotropic Steel Deck Panel</dc:subject>
	<dc:subject xml:lang="en-US">Steel Truss Bridge</dc:subject>
	<dc:subject xml:lang="en-US">Inventory Rating Factor</dc:subject>
	<dc:description xml:lang="en-US">Currently, 18,648 bridges with a total length of 510,366 km have been constructed in Indonesia, but only 86% are in good condition, while the rest are damaged. Steel truss bridge damage generally occurs on the RC decks, and its repair is often implemented through deck replacement or redecking using Orthotropic Steel Deck (OSD) panel. In Indonesia, this method has only been applied limitedly at the Citarum I Bridge in 2009 and the Cisadane Bridge in 2013, while the effect on the existing steel truss bridge is unknown. Therefore, this study aims to evaluate the steel truss bridge performance after OSD panel redecking through numerical modeling. The design process of the OSD panel was carried out by micro-modeling on ABAQUS CAE using shell elements with a mesh size of 50x50 mm and pinned boundary conditions. In this stage, the materials were assumed to be elastic with small deformations. The evaluation of steel truss bridge performance was performed on the A-class steel truss bridge Bina Marga design standard with a 60 m span by comparing the existing bridge inventory rating factor (using RC decks) to OSD panel redecking, which is an indicator of bridge self-weight reduction. Based on the structural macro-model developed using SAP2000, the bridge self-weight reduced the axial tension and compression forces on the steel truss bridge mainframe by 20.6%-24.6% and 20.5%-24.5%, respectively. Consequently, this increased the inventory rating factor by 9.3%-9.5%. In other words, using the OSD panels lighter than the existing RC decks increases the steel truss bridge capacity to resist the live load or vehicle rating throughout its service life. </dc:description>
	<dc:publisher xml:lang="en-US">Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada</dc:publisher>
	<dc:date>2022-07-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ugm.ac.id/v3/JCEF/article/view/3416</dc:identifier>
	<dc:identifier>10.22146/jcef.3416</dc:identifier>
	<dc:source xml:lang="en-US">Journal of the Civil Engineering Forum; Vol. 8 No. 3 (September 2022); 291-300</dc:source>
	<dc:source>2549-5925</dc:source>
	<dc:source>2581-1037</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ugm.ac.id/v3/JCEF/article/view/3416/1813</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 The Author(s)</dc:rights>
</oai_dc:dc>