Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Comparison of Material Point Method and Finite Element Method for Post-Failure Large Deformation Geotechnical Analysis

Journal of the Civil Engineering Forum · Vol. 9 No. 1 (2022) · hlm. 1–10

DOI
10.22146/jcef.3524
ISSN
2549-5925, 2581-1037
Terbit
2022-11-30
Penerbit
Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada
Bahasa
eng

Abstrak

Finite Element Method (FEM) has been the state-of-the-art method in geotechnical analysis since it first formulated in the 40s. It capable to handle Multiphysics simulation, soil-structure and soil-water interaction, and time history analysis. Though powerful, the standard Lagrangian FEM suffers mesh distortion when handling large strain deformation problem. This mesh entanglement problem makes post-failure analysis is considerably challenging to model if not impossible to do using FEM. The Material Point Method (MPM) then later introduced to solve these large strain deformation problems. Adapted from the Particle in Cell (PIC) method, MPM is a hybrid method that combines Eularian and Lagrangian approach by utilizing moving material points which are moving over spatially fixed computational mesh. This approach enables MPM to calculate not only fluid mechanics such in PIC but also solid mechanics and its intermediatory states. To demonstrate the capability of MPM and its consistency with FEM in geotechnical analysis, this article presents a comparison of FEM and MPM analysis on a hypothetical slope using Mohr-Coulomb constitutive model. The simulation shows that both FEM and MPM analyses are consistent to each other especially in small strain scheme. However, in large strain deformation, MPM is still able to get convergent result while FEM is not. The MPM simulation is also able to animate post failure behavior clearly, calculate post-failure strains and stresses distribution, and present final geometry of the model.

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 14 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Parahyangan Catholic University
  • Institut Teknologi Calvin
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Paulus Pramono RahardjoParahyangan Catholic University2
Yohanes Albrecht MontolParahyangan Catholic University1
Martin WijayaParahyangan Catholic University1
Ahmad Kemal ArsyadAfiliasi tidak diketahui1
Varian Harwin BatistutaParahyangan Catholic University1
Yiska Vivian Chritiansen WijayaParahyangan Catholic University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ugm.ac.id/v3/jcef/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Comparison of Material Point Method and Finite Element Method for  Post-Failure Large Deformation Geotechnical Analysis</dc:title>
	<dc:creator>Sunanhadikusuma, Arif Yunando</dc:creator>
	<dc:creator>Tjung, Ezra Yoanes Setiasabda</dc:creator>
	<dc:creator>Lim, Aswin</dc:creator>
	<dc:subject xml:lang="en-US">Finite Element Method</dc:subject>
	<dc:subject xml:lang="en-US">Material Point Method</dc:subject>
	<dc:subject xml:lang="en-US">Slope Stability</dc:subject>
	<dc:description xml:lang="en-US">Finite Element Method (FEM) has been the state-of-the-art method in geotechnical analysis since it first formulated in the 40s. It capable to handle Multiphysics simulation, soil-structure and soil-water interaction, and time history analysis. Though powerful, the standard Lagrangian FEM suffers mesh distortion when handling large strain deformation problem. This mesh entanglement problem makes post-failure analysis is considerably challenging to model if not impossible to do using FEM. The Material Point Method (MPM) then later introduced to solve these large strain deformation problems. Adapted from the Particle in Cell (PIC) method, MPM is a hybrid method that combines Eularian and Lagrangian approach by utilizing moving material points which are moving over spatially fixed computational mesh. This approach enables MPM to calculate not only fluid mechanics such in PIC but also solid mechanics and its intermediatory states. To demonstrate the capability of MPM and its consistency with FEM in geotechnical analysis, this article presents a comparison of FEM and MPM analysis on a hypothetical slope using Mohr-Coulomb constitutive model. The simulation shows that both FEM and MPM analyses are consistent to each other especially in small strain scheme. However, in large strain deformation, MPM is still able to get convergent result while FEM is not. The MPM simulation is also able to animate post failure behavior clearly, calculate post-failure strains and stresses distribution, and present final geometry of the model.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada</dc:publisher>
	<dc:date>2022-11-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ugm.ac.id/v3/JCEF/article/view/3524</dc:identifier>
	<dc:identifier>10.22146/jcef.3524</dc:identifier>
	<dc:source xml:lang="en-US">Journal of the Civil Engineering Forum; Vol. 9 No. 1 (January 2023); 1-10</dc:source>
	<dc:source>2549-5925</dc:source>
	<dc:source>2581-1037</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ugm.ac.id/v3/JCEF/article/view/3524/2121</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 The Author(s)</dc:rights>
</oai_dc:dc>