Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Airfield Asphalt Overlay Design for Non-conventional Pavement Structures: A Case Study of Airport in Indonesia

Journal of the Civil Engineering Forum · Vol. 8 No. 2 (2022) · hlm. 125–138

DOI
10.22146/jcef.3771
ISSN
2549-5925, 2581-1037
Terbit
2022-05-25
Penerbit
Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada
Bahasa
eng

Abstrak

Airfield pavements begin a gradual deterioration from several sources, including traffic load and environmental conditions. To achieve its intended design life, routine maintenance, repair, and rehabilitation should be performed. There are considerable research and studies conducted on the design and practice of pavements rehabilitation/overlay for typical airfield pavements. However, most of the existing guidelines and studies are only suitable for pavements with conventional structures. There has been no detailed investigation into the practice of airfield asphalt overlay for non-conventional pavement structures, such as chicken claw /Cakar Ayam pavement system and nailed-slab system. In the present article, challenges and issues for airfield asphalt overlay design for non-conventional pavement structures were examined based on an actual runway rehabilitation project in one of the major airports in Indonesia in 2015. The overlay design procedure, the evaluation of the existing pavement condition, including visual surveys and deflection tests, and the pre-overlay treatments were also discussed. In addition, a finite element (FE) simulation to model the non-conventional pavement structure was developed to calculate the required overlay thickness. The result showed that, during the overlay design of non-conventional pavement structure, data from falling weight deflectometer (FWD) could not be directly used to estimate the back-calculated layers moduli because of the difference in the geometric features of the pavement structure. Moreover, the FE model can be a robust tool to simulate the complex three-dimensional geometric features of a non-conventional pavement and important loading conditions, such as interface shear bond of overlay, that are usually not available in other tools, such as FAARFIELD. Finally, this study showed that the additional asphalt overlay could reduce the fatigue stress at the bottom of the existing slab and vertical stress at the top of the subgrade, resulting in overall smaller stress levels

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 36 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Universiti Teknologi MARA
  • University of Engineering and Technology Taxila
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bambang SupriyadiUniversitas Gadjah Mada2
Akhmad AminullahUniversitas Gadjah Mada1
Ali AwaludinUniversitas Gadjah Mada1
Wira Sucitra IbrahimUniversitas Gadjah Mada1
Renga Rao KrishnamoorthyUniversiti Teknologi MARA1
Luki Hariando PurbaUniversitas Gadjah Mada1
Anno MahfudaUniversitas Gadjah Mada1
Suprapto SiswosukartoUniversitas Gadjah Mada1
Muhammad KhuzamyUniversitas Gadjah Mada1
Imtiaz AhmedAfiliasi tidak diketahui1
Syed Bilal Ahmed ZaidiUniversity of Engineering and Technology Taxila1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ugm.ac.id/v3/jcef/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Airfield Asphalt Overlay Design for Non-conventional Pavement Structures: A Case Study of Airport in Indonesia</dc:title>
	<dc:creator>Rahman, Taqia</dc:creator>
	<dc:creator>Suhendro, Bambang</dc:creator>
	<dc:creator>Sartono, Wardhani </dc:creator>
	<dc:creator>Nawangalam, Purbolaras </dc:creator>
	<dc:creator>Hardiyatmo, Hary Christady</dc:creator>
	<dc:subject xml:lang="en-US">airfield pavement</dc:subject>
	<dc:subject xml:lang="en-US">asphalt overlay</dc:subject>
	<dc:subject xml:lang="en-US">pavement rehabilitation</dc:subject>
	<dc:subject xml:lang="en-US">overlay design</dc:subject>
	<dc:subject xml:lang="en-US">non-conventional pavement</dc:subject>
	<dc:description xml:lang="en-US">Airfield pavements begin a gradual deterioration from several sources, including traffic load and environmental conditions. To achieve its intended design life, routine maintenance, repair, and rehabilitation should be performed. There are considerable research and studies conducted on the design and practice of pavements rehabilitation/overlay for typical airfield pavements. However, most of the existing guidelines and studies are only suitable for pavements with conventional structures. There has been no detailed investigation into the practice of airfield asphalt overlay for non-conventional pavement structures, such as chicken claw /Cakar Ayam pavement system and nailed-slab system. In the present article, challenges and issues for airfield asphalt overlay design for non-conventional pavement structures were examined based on an actual runway rehabilitation project in one of the major airports in Indonesia in 2015. The overlay design procedure, the evaluation of the existing pavement condition, including visual surveys and deflection tests, and the pre-overlay treatments were also discussed. In addition, a finite element (FE) simulation to model the non-conventional pavement structure was developed to calculate the required overlay thickness. The result showed that, during the overlay design of non-conventional pavement structure, data from falling weight deflectometer (FWD) could not be directly used to estimate the back-calculated layers moduli because of the difference in the geometric features of the pavement structure. Moreover, the FE model can be a robust tool to simulate the complex three-dimensional geometric features of a non-conventional pavement and important loading conditions, such as interface shear bond of overlay, that are usually not available in other tools, such as FAARFIELD. Finally, this study showed that the additional asphalt overlay could reduce the fatigue stress at the bottom of the existing slab and vertical stress at the top of the subgrade, resulting in overall smaller stress levels</dc:description>
	<dc:publisher xml:lang="en-US">Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada</dc:publisher>
	<dc:date>2022-05-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ugm.ac.id/v3/JCEF/article/view/3771</dc:identifier>
	<dc:identifier>10.22146/jcef.3771</dc:identifier>
	<dc:source xml:lang="en-US">Journal of the Civil Engineering Forum; Vol. 8 No. 2 (May 2022); 125-138</dc:source>
	<dc:source>2549-5925</dc:source>
	<dc:source>2581-1037</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ugm.ac.id/v3/JCEF/article/view/3771/1633</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 The Author(s)</dc:rights>
</oai_dc:dc>