Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Dynamic Properties Comparison of 1D, 2D, and 3D Model for Concrete Box-Girder Bridge of 40-meter Span

Journal of the Civil Engineering Forum · Vol. 8 No. 3 (2022) · hlm. 321–328

DOI
10.22146/jcef.4148
ISSN
2549-5925, 2581-1037
Terbit
2022-07-29
Penerbit
Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada
Bahasa
eng

Abstrak

Concrete box-girder structure is considered the thin-walled structure, undergoing deformation and forces, as well as having structural rigidity in three dimensional directions. However, it’s commonly modeled as 1D structure for the sake of design practicality, which influences the numerical result of its dynamic properties when compared to both real time SHMS and field test result. To see how far the difference of the dynamic properties between 1D, 2D, and 3D model of concrete box-girder structure, the concrete box-girder structure is modeled as 1D (frame), 2D (shell), and 3D (solid) element with MIDAS Civil 2019. Considering the allowable deflection and stress limited by design code, concrete box-girder structure is modeled and analyzed as linearly elastic material. The dynamic properties obtained from these 3 models were compared with those obtained from real time SHMS and field test. These results indicate that both natural frequency and period of 2D and 3D models are close to those of real time SHMS and field test. However, the natural frequency of 1D model is slightly larger than the real SHMS and field test, indicating that 1D model gives the slightly overestimate natural frequency and structural rigidity compared to the reality. Unlike 2D and 3D model, the structure is accounted to have the uniform sectional rigidity along transversal direction in 1D model. This is why 1D model seems to have higher structural rigidity compared to 2D and 3D model, which subsequently yields the higher natural frequency than 2D and 3D model. This research proves that the designers’ discretion is advised if 1D model is used for the sake of design practicality.

Kata kunci

Jaringan kolaborasi para penulis

27 penulis · 76 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Universiti Teknologi MARA
  • Port and Airport Research Institute
  • Sebelas Maret University
  • Jadavpur University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Iman SatyarnoUniversitas Gadjah Mada2
Angga Fajar SetiawanUniversitas Gadjah Mada2
Yusuf HarokiPort and Airport Research Institute2
Luki Hariando PurbaUniversitas Gadjah Mada2
Didib Astalis Ulul AbsorUniversitas Gadjah Mada2
Kms. M. Rama PerwiraUniversitas Gadjah Mada1
Arif Setiawan Budi NugrohoUniversitas Gadjah Mada1
Erik Wahyu PradanaSebelas Maret University1
Andreas TriwiyonoUniversitas Gadjah Mada1
Saroj MandalJadavpur University1
Taqia RahmanUniversitas Gadjah Mada1
Wardhani SartonoUniversitas Gadjah Mada1
Purbolaras NawangalamUniversitas Gadjah Mada1
Hary Christady HardiyatmoUniversitas Gadjah Mada1
Shuanglan WuPort and Airport Research Institute1
Anno MahfudaUniversitas Gadjah Mada1
Suprapto SiswosukartoUniversitas Gadjah Mada1
Muhamad Fauzi DarmawanUniversitas Gadjah Mada1
Noorsuhada Md NorUniversiti Teknologi MARA1
Sidiq PurnomoAfiliasi tidak diketahui1
Ignatius Harry SumartonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ugm.ac.id/v3/jcef/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Dynamic Properties Comparison of 1D, 2D, and 3D Model for Concrete Box-Girder Bridge of 40-meter Span</dc:title>
	<dc:creator>Ibrahim, Wira Sucitra</dc:creator>
	<dc:creator>Aminullah, Akhmad</dc:creator>
	<dc:creator>Awaludin, Ali</dc:creator>
	<dc:creator>Suhendro, Bambang</dc:creator>
	<dc:creator>Supriyadi, Bambang</dc:creator>
	<dc:creator>Krishnamoorthy, Renga Rao</dc:creator>
	<dc:subject xml:lang="en-US">Comparison</dc:subject>
	<dc:subject xml:lang="en-US">Dynamic</dc:subject>
	<dc:subject xml:lang="en-US">Modeling</dc:subject>
	<dc:subject xml:lang="en-US">Box-Girder</dc:subject>
	<dc:subject xml:lang="en-US">Concrete</dc:subject>
	<dc:subject xml:lang="en-US">Structural Engineering</dc:subject>
	<dc:subject xml:lang="en-US">Bridge Engineering</dc:subject>
	<dc:subject xml:lang="en-US">Structural Dynamics</dc:subject>
	<dc:description xml:lang="en-US">Concrete box-girder structure is considered the thin-walled structure, undergoing deformation and forces, as well as having structural rigidity in three dimensional directions. However, it’s commonly modeled as 1D structure for the sake of design practicality, which influences the numerical result of its dynamic properties when compared to both real time SHMS and field test result. To see how far the difference of the dynamic properties between 1D, 2D, and 3D model of concrete box-girder structure, the concrete box-girder structure is modeled as 1D (frame), 2D (shell), and 3D (solid) element with MIDAS Civil 2019. Considering the allowable deflection and stress limited by design code, concrete box-girder structure is modeled and analyzed as linearly elastic material. The dynamic properties obtained from these 3 models were compared with those obtained from real time SHMS and field test. These results indicate that both natural frequency and period of 2D and 3D models are close to those of real time SHMS and field test. However, the natural frequency of 1D model is slightly larger than the real SHMS and field test, indicating that 1D model gives the slightly overestimate natural frequency and structural rigidity compared to the reality. Unlike 2D and 3D model, the structure is accounted to have the uniform sectional rigidity along transversal direction in 1D model. This is why 1D model seems to have higher structural rigidity compared to 2D and 3D model, which subsequently yields the higher natural frequency than 2D and 3D model. This research proves that the designers’ discretion is advised if 1D model is used for the sake of design practicality.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada</dc:publisher>
	<dc:date>2022-07-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ugm.ac.id/v3/JCEF/article/view/4148</dc:identifier>
	<dc:identifier>10.22146/jcef.4148</dc:identifier>
	<dc:source xml:lang="en-US">Journal of the Civil Engineering Forum; Vol. 8 No. 3 (September 2022); 321-328</dc:source>
	<dc:source>2549-5925</dc:source>
	<dc:source>2581-1037</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ugm.ac.id/v3/JCEF/article/view/4148/1815</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 The Author(s)</dc:rights>
</oai_dc:dc>